Timbren's Suspension Enhancement System has heavy-duty hollow rubber springs that absorb the brunt of the force on both the front and rear of the Jeep Cherokee, helping to reduce sag and sway ensuring better handling, better traction and a smoother ride.
The resistance from Timbren's Suspension Enhancement System works with the Jeep Cherokee's factory suspension to keep the Jeep Cherokee level, thereby improving your driving performance. When a truck bed is loaded, the rear of the Jeep Cherokee will sag under the load, and the front will sag under the burden of heavy equipment such as a snow plow. In this case, the axle is handling not only the weight of the load, but more of the Jeep Cherokee's weight as well. Because less weight is on the opposite axle, those tires are making significantly less contact with the road meaning there is less traction and therefore a decrease in overall control, handling and stopping.
The Timbren system has a Jeep Cherokee-specific bracket that will be bolted onto each frame rail above the rear axle. Hollow rubber springs are bolted to the bottom of the bracket, hanging down so that the bottom of the spring touching the axle. Because the spring is already making contact, it is working at once to support the Jeep Cherokee's existing suspension. This "pre-loaded" design offers maximum support for Jeep Cherokees that are always hauling a load.
Timbren Suspension Enhancement Systems are designed to work progressively. When the hollow rubber springs are compressed, the convoluted design causes them to quickly collapse along the folds. Once the folds are compacted, the stacked barrel shape provides increased resistance, stiffening the suspension and keeping the Jeep Cherokee level.
Each hollow rubber spring works independently to support the driver's or passenger's side of the Jeep Cherokee. This is helpful when you swerve or make sharp turns. Each spring is activated when it is needed, so body roll is greatly reduced. The independent action also works well when hauling off-center loads.
Timbren's Suspension Enhancement System will raise the front of the end of the Jeep Cherokee when heavy equipment, such as a plow, is attached. Headlight beams will be pointed in the right direction and tire wear will be reduced. If the plow is off center or has an extension, the hollow rubber springs will automatically compensate for this as well.
Another great feature of the rubber construction is that the springs absorb most of the road shock, creating a smoother, more stable ride overall. Wear and tear on the factory suspension is also lessened as the rubber springs work to prevent bottoming out on rough roads.
Compared to the competition:
Timbren's suspension enhancement systems are much easier to install than air springs - no air hoses are needed to be run, no compressors or gauges to hook up, and no manual adjustments necessary. The rubber construction causes Timbren's springs to be more elastic than similar products constructed of micro-cellular urethane. More elasticity allows for a more comfortable ride because the rubber has more travel.
2000 Jeep Cherokee Owners Who Purchased This Vehicle Suspension Also Bought...
Average Customer Rating: 4.5 out of 5 stars (2 Customer Reviews)
by: Ryan m09/11/2012
Is this review helpful?
I have used these on both of our vehicles, and they do a great job of improving handling and load hauling ability.54230
Is this review helpful?
Needs a little more slot in base plate. I could not line up to center of axle. With that said it works great and has taken out those harsh bumps.33622
Ask the Experts about this Timbren Vehicle Suspension
Do you have a question about this Vehicle Suspension?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.