DeeZee Universal Nerf Bars - 3" Round - 32" Long - Black

See what our Experts say about this DeeZee Nerf Bars - Running Boards

• How Far DeeZee # DZ3700301 Universal Fit Nerf Bar Extends from Vehicle
  The DeeZee Universal Nerf Bars are 19.68 inches deep, from the ends of the step bars to the furthest point away from the mounts, as you can see in the photo I've edited for you. The bars can be cut down if you wish so they don't extend from the frame as much.
  view full answer...
  
• Length of DeeZee Nerf Bars # DZ3700301
  The steel tubing of the DeeZee Nerf Bars # DZ3700301 is 32 inches long. They're designed to mount under the front doors only.
  view full answer...
  
• Will Nerf Bars from 2009 Ford Ranger 2 Door SuperCab Fit 4 Door SuperCab of Same Year
  The Westin Tube Steps like part # DZ3700301 are a fit for both a 2009 4 door and 2 door Ford Ranger SuperCab so the steps you have now would easily transfer between the two trucks.
  view full answer...
• Recommended DeeZee Running Boards for 1997 Ford F-250 HD Crew Cab
  We do have a few DeeZee Running Boards available that are confirmed to fit your 1997 Ford F-250 HD Crew Cab, which I have linked for you to look through. I recommend looking at the DeeZee Nerf Bars # DZ3700301. These 3 inch round tube steps will work great to make climbing in and out of the truck easier. The steps feature molded plastic pads for a non-skid surface and the black powder coat finish will resist rust and corrosion. The step pads are 21 inches long and 3 inches wide. A custom...
  view full answer...
• Will the DeeZee Running Boards part # DZ3700301 Fit a 2002 Toyota Tundra Regular Cab
  Yes, the DeeZee Running Boards part # DZ3700301 that you referenced have been confirmed as a fit for your 2002 Toyota Tundra Regular Cab. These steps have a 3 year warranty and have black powder coated bars and brackets to resist corrosion.
  view full answer...
• Will DeeZee Running Boards DZ3700301 Fit a 1986 GMC C/K 3/4 Ton Regular Cab
  We checked with DeeZee and the Running Boards part # DZ3700301 that you referenced are a confirmed fit for your 1986 GMC C/K 3/4 ton with a regular cab. These are a no-drill install too.
  view full answer...
• Length of DeeZee Nerf Bars on 2017 Ford Expedition
  The steel tubing of the DeeZee Nerf Bars # DZ3700301 is 32 inches long. They're designed to mount under the front doors only.
  view full answer...
• Nerf Bar Recommendation for 2000 Dodge Dakota Quad Cab
  No they would not as they are very different trucks. You'd have to go with a set specifically designed for the 2000 Dodge Dakota Crew (Quad) Cab like the # DZ3700301.
  view full answer...
• DeeZee Nerf Bars for a 1999 Ford Explorer Sport 2-Door
  DeeZee Nerf Bars - 3" Round - Black - Cab Length Item # DZ3700301 will fit your 1999 Ford Explorer Sport 2-door model. The bars may not fit any brackets you have from old bars but they come with their own so no worries! You could paint them if you wanted to or you could go with the polished stainless steel version, # DZ3700303.
  view full answer...
• Are Nerf Bars Available for a 2013 Honda Pilot
  I spoke with my contact at DeeZee and the Universal 3 inch Round Nerf Bars, # DZ3700303, will fit a 2013 Honda Pilot. These polished stainless steel bars measure 32 inches long. These bars are also available in black powder coated steel, # DZ3700301. Custom fit bars are not currently available for a 2013 Honda Pilot.
  view full answer...
• Nerf Bars Compatible with 1999 Jeep Cherokee Sport 2 Door
  We do have nerf bars for your 1999 Jeep Cherokee Sport 2 door. We have the DeeZee Nerf Bars - 3" Round in black # DZ3700301 or stainless steel # DZ3700303 which each have one step pad per side and are confirmed to fit your Jeep.
  view full answer...
  
• 3 Inch Black Nerf Bars That Fit Chevrolet S-10 Pickup
  Yes, we have nerf bars that fit your 2002 Chevrolet S-10 Pickup. The DeeZee Nerf Bars - 3" Round - Black - Cab Length # DZ3700301 are confirmed to fit the Crew Cab, 2 and 3-Door Extended Cab and Regular Cab. The Installation kit with mounting brackets and hardware is included and there is no drilling required. I have a link with 2002 Chevrolet S-10 Pickup Crew Cab Nerf Bars attached. The # DZ370111 only fit late models of Yukon, Tahoe, C/K Series Pickup trucks.
  view full answer...
• Will Nerf Bars from a 2004 Chevrolet Avalanche 1500 Fit a 2015 Chevrolet Silverado 1500
  I do have nerf bar options for what I assume is a 2015 Chevrolet Silverado 1500 but unfortunately, the nerf bars off a 2004 Chevrolet Avalanche 1500 will not work for you. Instead, I recommend taking a look at the DeeZee Nerf Bars part # DZ3700301 for regular cab, part # DZ372531 for crew cab, or part # DZ372521 for double cab models. These nerf bars are a custom fit and have a gloss black finish.
  view full answer...
• Available Steps and Nerf Bars for 1979 Ford F-250
  Although this would be a very sturdy mounting point for welded-on steps of some kind the truck's frame is so far inboard of the doors that there would be excessive stress put on those welded mounts and they would be very likely to fail. Although the rocker panels are not as strong as the frame the steps that mount to them, such as DeeZee # DZ3700301 and those shown on the linked page, would be further to the outsides of the truck and so have less physical stress on them once mounted. Select...
  view full answer...
• Will the DeeZee Nerf Bars # DZ3700301 Fit a 1995 Ford F-150 Regular Cab?
  Since the DeeZee Universal Nerf Bars - 3" Round - 32" Long - Black # DZ3700301 are a universal fit, they will technically fit your 1995 Ford F-150 regular cab. However, the installation process will require a lot of time and drilling. You will be able to fit the bars onto the vehicle in order to have them protrude in a way that suits you. If you want to save a lot of time with a simpler installation, I recommend the Aries Round Nerf Bars - 3" Diameter - Black Powder Coated Steel # AA203001....
  view full answer...
  
• Nerf Bar Brackets for 2006 Honda Element
  The Aries # AA4504 custom brackets are actually for Ford F-150s from 2004 to 2014 so they won't fit your 2006 Honda Element. The only Nerf bars we carry for your Element are from DeeZee; parts # DZ3700301 and # DZ3700303.
  view full answer...
• Will the Aries Nerf Bars # AA204041-2 Fit My 1987 Chevy R30 Pickup?
  I have a solution for you. Unfortunately, I confirmed with Aries that the Aries Round Nerf Bars - 3" Diameter - Polished Stainless Steel # AA204041-2 will not fit your 1987 Chevy R30. With that being said, I confirmed with DeeZee that the DeeZee Universal Nerf Bars - 3" Round - 32" Long - Black # DZ3700301 will fit your vehicle (both crew cab and regular cab models). The universal fit will secure to the truck's frame for maximum strength. There will be drilling required for installation.
  view full answer...
• Step Recommendation for 1999 Chevy S-10 Extended Cab Pickup Truck
  The Carr Custom-Fit Side Steps - Hoop II - Black Powder Coated Aluminum - 7" Step # CARR103991-1 installs into the body panel seam and that simply isn't strong enough on your 1999 S-10 pickup for a step. If you want a confirmed fit for your extended cab S10, I recommend the DeeZee Nerf Bars - 3" Round - Black - Cab Length # DZ3700301 which will mount to the frame of your truck and ensure a solid fit able to support weight and be durable.
  view full answer...
• Universal and Custom Steps for 2001 GMC Sonoma
  Pilot Aluminum Universal Side Step # AS-400 is a general-purpose step that will fit a wide range of vehicles including vans, SUVs and trucks such as your Sonoma. Hardware is included but it is possible that some installations may require alternate installation hardware depending on your preferred mounting point. We also have nerf bars and tube steps with custom-fit install kits for the 2001 Sonoma and these appear on the linked page. If you want to see compatible steps for your truck just...
  view full answer...
• Recommended Step for 2007 Ford Ranger Truck
  The Lippert Kwikee 28 Series Electric Step # LC3747452 is not designed for use on vehicles like a truck. I'm sure it is possible to mount it, but you would need to reinforce the frame for the correct mounting. The motor issue you stated could be due to a bad switch but this is not a regular issue. If you were to install this on your vehicle you absolutely would need to run a power wire # 10-1-1 from the battery to the switch and run the negative to ground on the vehicle frame. I've...
  view full answer...
  
• Recommendation for Silver Side Steps on 2011 Ford Ranger XL SuperCab 2-Door
  If you are just looking for side steps (and not running boards) for your 2011 Ford Ranger 2-Door XL SuperCab I recommend taking a look at either the Carr LD # CARR114992 for a rugged square-edged design or # CARR124992 for a sleeker hoop-style appearance. Both options are confirmed to fit your truck and feature a silver corrosion-resistant aluminum construction. We do not have any actual chrome plated models available for your Ford Ranger so this will be your best option. If you are...
  view full answer...
• Nerf Bars that Do Not Mount to the Frame for a 2002 Ford Ranger
  You are correct that drilling is required to install DeeZee nerf bars # DZ3700301 on your 2002 Ford Ranger. The instructions, linked for reference, leave a lot to be desired. Usually they are more specific but in this case you would have to mount the frame brackets where there is nothing in the way on the frame. If that is not possible without moving things then I do not recommend these nerf bars. For black bars that attach to the rocker panel instead of the frame you can use # 25-1555...
  view full answer...

Do you have a question about this Nerf Bars - Running Board?