Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Rating: 
9 reviews
Code: Y02621
Retail:$199.00
Price:$179.10
Shipping Weight: 23 pounds
Shipping Special
Quick and easy to use, the premium QuickBack 2 trunk mounted carrier looks great installed on your vehicle. The carrier arms come with anti-sway cradles and fold down for storage, and a labeled strap system makes installation a breeze.
Features:
Specs:
When it comes to trunk mounted two-bike carriers, Yakima's QuickBack 2 is in a league of its own.
The QuickBack is the world's fastest-installing trunk mount, with a labeled, six-strap system that lets you know where to attach the straps. No more fumbling around with straps and installation guides. The QuickBack 2 will be mounted on your vehicle in seconds for an easy-to-use, effortless bike-carrying experience.
QuickBack 2 features an integrated knob to adjust the angles of the base, ensuring a great fit on your vehicle.
The narrow design of the dual arms allows the QuickBack 2 to carry a wide variety of bike styles and also reduces the need for a bike adapter bar. The arms include padding to ensure bike protection and (SwitchBlade) anti-sway cradles that reduce bike movement and help hold bikes away from your vehicle.
When idle, the arms fold down with a an adjustable, side-mounted knob. The arm angles can be also be set to your desired position with the same knob.
QuickBack 2 not only protects your bike from damage during transport, but your car as well. The carrier feet and the strap buckles are covered with premium padding, sparing your vehicle's paint job from scratches. Extra strap is not blowing in the wind either as clips are included to secure it.
The QuickBack 2 includes a passive, built-in security system with a steel-reinforced strap that goes in your trunk during installation. Removing the QuickBack 2 from the vehicle requires that the trunk be opened. QuickBack 2 includes glass hatch hooks for installing the unit on vehicles with glass hatchbacks, gate mounts and on other hard-to-fit vehicles.
QuickBack 2 features a convenient, built-in bottle opener and comes backed by a lifetime warranty.
Video of Yakima QuickBack 2 Bike Trunk Mounted Rack
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Today we are going to review the Yakima Trunk Bike Rack part number Y02621 the QuickBack II. We have got it setup on the table and we will show you the features of it. First off you can see the two cradles and that it carries two bikes and also what is nice about it is the straps that hold the bike on to the trunk itself, the straps are individually labeled for the top, side, and the bottom. You can tell here that the hooks themselves are covered in a plastic rubber coating and that helps out when you attach this to your car, it will not scratch up the edges. 00:32
You can see that we have the bicycle rack fully compressed you can see just by the arch right here. The arch is helpful to go around spoilers and around different curves of the vehicle. To make this a little bit bigger all you have to do is loosen the knob and you pull it out. That is pulled to its farthest point but again you can put this anywhere you want to. This will adjust to about any vehicle out there. Next we will move on to the arms that actually hold the bikes. Right now it is in the folded down position up against the bike rack and it is very easy to pull out and level out once you have your bike rack installed on the vehicle. You simply loosen this red knob and you can see how it comes apart and then you can adjust it to the height that you need and then just tighten it back up where the teeth engage on both sides. Finger tight is really all you need. 01:32
Next we will move on to the cradles that hold the bikes. You can see that where the bike sits has a felt base to it so when the bikes sit on there the cables will sit on to the felt and sink in a little bit so it does not ruin the paint job on your bike. We are looking at the one side here with just the strap that holds the bike in place. On the other side it has the anti-sway cradle. This part will go against the feet tube and it has rubber straps that hold up against it. Next we will show you the feet that actually sit against the paint job of your car. As you can see these are soft and pliable so it will match the contour of your vehicle when you tighten it down plus it puts a wide surface area on there so it will not put any dents into the sheet metal as well. It also gives a good grip on the vehicle as well. When it sits on the vehicle it should be sitting on here like that. Now we will cover some accessories that come with the bike rack. This long strap with this end on it is the security strap. There is a reinforced steel cable on the inside of here. What happens is this part gets installed in the trunk area, the trunk lid shuts on this, and this will be tied off to the QuickBack so no one can steal it. 02:45
These two accessories right here are called glass mounts. Basically if you are going on a vehicle that you have to put the hooks behind some glass, what these parts do is replace the top hooks so this part actually gets caught inside the glass area behind it and then pulls over the top edge of it so it can not pull out. There is a nice rubber coating all the way around so it will not mar up or mess up anything on the inside of the vehicle. Finally we have got a nice little strap here. You wrap that around your wheel and the frame of your bike to keep the handle bars straight and the tire from spinning. We are going to install this on the vehicle. First off we are going to work with our security strap, basically what we are going to do is pull out this bar here, we are going to wrap it around and pull this back through just like so and take the bar and put it back inside. Remember this will go inside the trunk lid. Now we can start installing this on our car. The first thing we need to do is lay it on the vehicle. Make sure you adjust the QuickBack so you have enough room to clear your spoiler. Once you have that established take your security strap, put it behind the trunk lid, and just let it fall into place and it is fine. Next you want to work with the top straps, these will hook up to the top edge of the trunk lid and just pull those tight. Make sure your feet are flat on there and do the same thing for the bottom. Also since this one is sitting on the license plate, if you have a frame around it it might be a good idea to take the frame off so it does not break it. Make sure you have it centered on the vehicle. Once you have it centered on the vehicle take the straps labeled at the bottom and that will go on the bottom edge of the trunk and then you can go to work on your side straps. Snug those down. Do the same thing on the other side. 05:13
When you tighten down these side straps you can also see that they are connected to the bottom strap as well so when you tighten this one up it does both. Once you have them all started evenly get them hand tight. You do not really have to crank on them just enough to get them secure and test the rack and tighten it if you need to anymore. Once you have the bicycle rack secured to the trunk lid make sure it is shut completely. Then we will tidy up the straps. Basically fold them over themselves and slide them into the strap holder. Each strap has these holders which is very nice. Now lets adjust our arms to their final position, right now they are kind of tilted down towards the ground you want to have it at least level or pointing up whichever closer you can get to. We will undo the red knob and see how it spreads out and in this case we will have to be slightly up a little bit. At this point we can load on our bikes. Lets undo the straps first. It is always good practice to put it closest to the bike rack especially your heaviest bike. In this case we are going to put it on the edge so you can see things easier how they get strapped down. We are going to put the seat post next to the cradle with the anti-sway. Make sure you have the bike balanced on there too as well. This is going to sit just right just like that. Lets do our strap. Now we can do the top straps. Go to the other side. Next we can do the wheel strap with a simple buckle. In a few minutes we are good to go. The great part about this rack is at the end of the ride your bicycle will help you out one more time with a bottle opener on the end and there you have it for Yakima QuickBack II part number Y02621.
Customers Who Purchased This Trunk Bike Racks Also Bought...
Replacement parts available for this product
Average Customer Rating: 4.9 out of 5 stars (9 Customer Reviews)
by: Denny D05/29/2012
Is this review helpful?
Good quality product. Fit well. 41899
by: duk moo song12/14/2011
Is this review helpful?
good, exellent!! 28138
by: Bob H.04/08/2011
Is this review helpful?
Talk about service; I am in south Georgia and I ordered my Yakima bike rack from Etrailer over the internet on Monday morning about 7am; they responded via email a few hours later that my order had processed and was being readied for shipment; another email about 1pm that same day stated my order had been shipped. I received my bike rack about 10am on Wednesday. The rack is quality workmanship and fits the car great because of its versatility. I will update this review once I have the opportunity to use it more. 11310
by: Denise05/09/2013
Is this review helpful?
Product was easy to use and sturdy. Etrailer was great. Would order from them again.79590
by: Andrew02/21/2013
Is this review helpful?
The rack is easy to install on the hatch of my 2010 CR-V, and easy to use. The only niggle is that the lip on the hatch door is too wide for the bottom hooks to clip onto. I get around this by opening the hatch slightly and pushing the hooks into the trunk, then closing the hatch. The rack fits securely, although we've only tried it with one bike so far - haven't needed to carry two yet.67187
by: Diane02/04/2013
Is this review helpful?
I am very pleased with this product so far. The video on the website made learning to install it much easier. Thanks.64913
by: 2920 Car wash10/19/2012
Is this review helpful?
Excellent TEAM at etrailer.com! Thanks for the prompt and great service!57670
by: If It Doesn't FIt You Must Acquit08/16/2012
Is this review helpful?
This fits my Acura MDX 2010! I went thru two other bike racks that would not fit. This product is well built, solid and has great engineering. Pretty easy to install and remove. Beats throwing my bikes into the back of my SUV. Excellent delivery and follow up from etrailer!51980
by: m06/15/2012
Is this review helpful?
Immediate Shipping should be their motto. Within a couple hours of placing the order I received an email saying it shipped. Oh, and the bike rack was good too.44222
Ask the Experts about this Yakima Trunk Bike Racks
Do you have a question about this Trunk Bike Racks?
Related Products...
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Installation Details
