Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
A BedRug truck-bed mat upgrades the floor of your Ford F-150 bed to a 3/4" thick, slip-resistant, carpet-like surface that cushions and protects fragile loads, helps prevent skidding cargo and still offers a heavy-duty work surface for rugged use.
Features:
Specs:
The BedRug truck-bed mat protects your fragile cargo and the floor of your Ford F-150's bed from life's bumpy roads. An economical alternative to a full-coverage BedRug, the BedRug mat cushions the truck-bed floor to help protect furniture, pet kennels, electronics and other breakable or sensitive loads. The non-slip surface helps to keep items from skidding around in your truck bed and suffering damage. Sliding cargo can also cause an uneven distribution of weight in the back of your truck. Steering and braking are more difficult if the load in your truck bed isn't evenly distributed. The BedRug helps to keep your load where you put it, giving you better control of your truck. The soft padding is also friendly to your knees when you're working in your truck bed or crawling around under your camper shell.
The BedRug works as hard as it plays. You can haul concrete, gravel, lumber, mulch and more without harming your BedRug mat. Its UV-resistant surface can stand up to shoveling and other heavy-duty use. It even resists battery acid, oil and bleach.
BedRug doesn't absorb liquids - water runs right off the waterproof foam - so you can hose it off, let it dry and sit in it later for your tailgate BBQ. It also resists mildew and won't stain.
Video of BedRug Custom Truck Bed Mat - Bed Floor Cover for Trucks with Bare Beds or Spray-In Liners
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Today we have a 2012 Ford F-150, we're going to be installing the BedRug Custom Truck Bed Mat for the floor of the bed, part number BMQ04SBS. The first thing we need to do is flip our BedRug over and attach our hook strips to the loop strips that are already there on our BedRug. The BedRug mat is going to fit the corrugations and shape of our bed perfectly. With the hook and loop strips the BedRug can be removed when it's not needed or wanted. Once we've done that we'll know the exact position that we need to clean in our truck bed before we can install it. We'll take a rag with alcohol and we're going to be cleaning the area where we're going to adhere our hook straps.
Once we have the area cleaned with alcohol, we're going to need to use the adhesion promoter since the truck has a spray-in bed liner. We'll apply a thin layer of the adhesion promoter on the area where the hook strip will be glued down. We'll allow it to dry, remove the adhesive backing from our hook strips and place the BedRug down into the truck. We need to firmly and aggressively rub down the area where our hook strip is so that we get a good secure adhesion between the hook strip and our truck bed. And that does it for our installation of the BedRug Truck Bed Mat, part number BMQ04SBS on our 2012 Ford F-150..
Ford F-150, 2011 Owners Who Purchased This Truck Bed Mats Also Bought...
Related Products...
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
