Yakima Locking BedHead Single Bike Truck Bed Mounted Rack - Clamp-on

Yakima Truck Bed Bike Racks - Y01133

No drilling - or pomade - is required to sport a stylish BedHead. This truck bed mounted bike rack installs quickly, and the fork-mounted design makes loading and unloading your bike a breeze. Your bike secures to the rack with a locking skewer.

Features:

• Holds 1 bike
• Installs quickly to inside lip of truck bed rail
  • Clamps in place - no drilling required
• Keeps bike in place with 9-mm-long throw skewer
  • Opens with quick-release lever
  • Includes Same Key System (SKS) locking core to secure bike to BedHead
    • SKS core can be changed out and keyed alike with other Yakima locks
• Provides stability for bike with fork-mounted style
• Protects vehicle paint job with soft padding
• Constructed of anodized aluminum
  • Resists corrosion

Specs:

• Capacity: 1 bike
• Dimensions: 1-3/4" wide x 3" tall x 4" long
• Lifetime warranty

8001133 Yakima Locking BedHead Truck Bed Mounted Bike Rack

Video of Yakima Locking BedHead Single Bike Truck Bed Mounted Rack - Clamp-on

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Yakima BedHead Truck Bed Bike Rack Review - 2005 Chevrolet Silverado

Yakima BedHead Truck Bed Bike Rack Review - 2012 Dodge Ram

Customers compare Y01133 to these similar products

Topline 2 Bike Carrier Truck Bed Mounted Expandable Bike Rack$79.95

Swagman Pick-Up Truck-Bed-Mounted 2 Bike Carrier - Locking - Fork Mount$99.00

Thule Bed-Rider Locking, Aluminum 2 Bike Carrier - Truck Bed Mount$197.95

Yakima BedHead Single Bike Truck Bed Mounted Rack - Clamp-on$54.00

Yakima BeddyJo 2 Bike Truck Bed Mounted Rack$125.10

Customers Who Purchased This Truck Bed Bike Racks Also Bought...

Chrome Bracket and Single Wire Plug for Thin Line Trailer Clearance and Side Marker Lights $2.50

Yakima BedHead Single Bike Truck Bed Mounted Rack - Clamp-on $54.00

Ask the Experts about this Yakima Truck Bed Bike Racks
Do you have a question about this Truck Bed Bike Racks?

• Will the Yakima Locking BedHead Bike Rack # Y01133 Fit a 2010 Toyota Tacoma TRD
  
• I spoke with my contact at Yakima. He stated that the BedHead, # Y01133, will not fit your 2010 Toyota Tacoma, but there is a similar product that will. Take a look at the Yakima Locking BlockHead Single Bike Truck Bed Mounted Rack, # Y01118. The main difference is that to install the BlockHead, you will have to drill two holes per BlockHead. I have included a link to the installation details below. There is also a non-locking version; the Yakima BlockHead Single Bike Truck Bed Mounted Rac
  view full answer...


• Will A Bike With Disc Brakes Work On The Yakima Truck Bed Bike Rack, # Y01133
  
• The Yakima Truck Bed Bike Rack, # Y01133, requires that the front wheel is removed from your bike. I have a bike with disc brakes in our showroom, so I went out with the bike rack to see if it would work. The front wheel did come off the bike and the only thing left on the bike is the small caliper attached to one of the forks. I attached the bike rack to the front fork of the bike and it tightened down with no problem and no interference with the small caliper. So it will work on yo
  view full answer...


• Will the BedHead Single Bike Rack # Y01133 Work with a Tandem Bike on a 2010 Dodge Ram 1500
  
• The Yakima Locking BedHead Single Bike Truck Bed Mounted Rack - Clamp-on, # Y01133, holds the bike at the forks, so the bike should be able to mount to this rack, though a Cannondale Tandem bike specifically has not been tested. As long as the holes in the forks that hold the front wheel are 9 millimeters or less in diameter, the pin will fit through. Since you have a tandem bike that is quite a bit longer than a regular bike, I recommend some additional support at the rear of the bike so it doe
  view full answer...


• Truck Bed Bike Rack Recommendations for a 2003 Dodge Ram 1500
  
• I checked with Yakima and the Yakima Locking BedHead Bike Rack # Y01133 will fit in the bed of your 2003 Dodge Ram 1500. Check out the installation instructions and review video I attached for this product. You will need to remove your front wheel in order for this rack to secure your bike. For a truck bed rack that does not require the removal of your front wheel check out the Thule Insta-Gater Truck Bed Single Bike Rack # TH501. I attached a review video for this product as well.
  view full answer...


• Will Yakima BedHead Clamp-On Truck Bed Rack # Y01133 Fit Front Bed Rail on Toyota Tundra Crew Max
  
• The Yakima BedHead Clamp-On Single Bike Truck Bed Mounted Rack, part # Y01133, is designed to hook on the underside of the truck bed side rails on your Toyota Tundra Crew Max. I am including a picture of how it attaches to the bed rails. I am also including a link to the installation instructions and review video for this product. If the front bed rail on your Tundra has a similar design to the top of the side rails on your truck bed, you could probably attach the BedHead bike rack to the fro
  view full answer...


• Will the Yakima BedHead Bike Rack # Y01133 Fit on a 2005 Toyota Tacoma Access Cab
  
• To determine if the Yakima BedHead Clamp-On Bike Rack, # Y01133, will fit on your 2005 Toyota Tacoma, you will need to look at the top of your truck bed rails. This bike rack is designed to hook on the underside of the trick bed side rails (see photo). There must be a lip present for the hook to grip the rail. If your truck has the bed rail system, then we do have an option for you, however the BedHead will not work. Instead, you could use the RockyMounts Clutch SD Bed Rail Bike Rack, # RKY01
  view full answer...