Select Your Vehicle
view cartView Cart

Truck Bed Accessories > Motorcycle Carrier > Blue Ox


Blue Ox OverBilt SportLoader Motorcycle Lift and Carrier for Pickup Trucks with 6' Long Beds

Blue Ox Truck Bed Accessories

Code:   SC3001

Retail:$3,495.00

Price:$2,649.95


Shipping Special

Shipping Weight: 525 pounds


Ships via truck freight, additional fees apply.
Ship to:
 

Quantity: 







Blue Ox Truck Bed Accessories - SC3001

Transport your motorcycle while leaving your hitch free for towing with this quick and simple system. Tie down the bike on the powered ramp, hit the switch to haul it safely into your truck bed, and secure it in place.

Features:

  • Simple and effective method of hauling a motorcycle with your pickup
    • Bike loads into truck bed, leaving hitch free for towing
  • Powered ramp lifts your motorcycle into place
    • Requires 12V lawn-and-garden battery (not included)
      • No additional wiring required
    • Clamp front tire into cradle, use remote to raise cradle and bike follows up ramp
      • Hand crank clamps tire as it sits in tire cradle
      • Adjustable switch lets you control travel of cradle when loading/unloading
  • Motorcycle rides about 1" off bed and is tied down to low-profile ramp assembly for stable transport
    • Keeps center of gravity as low as possible
  • Unit pivots on tube attached between tailgate mounting posts to lower motorcycle into bed
    • Pivot tube sold separately - determine which length is right for your vehicle
    • Tailgate must be removed to mount tube
    • Flatbed trucks without tailgates require a hinge kit (SC9049 - sold separately) instead of a pivot tube
  • Ramp extensions can be removed and stored in bed when not in use
    • Extension available for lifted pickups (SC9010)
  • 12V Motor with positive gear drive, removable corded control, cargo buckle tie-down, ramps and hardware included
  • Black powder coated steel construction
  • Made in USA


Specs:

  • Requires: Blue Ox pivot tube or hinge kit
    • Pivot tube replaces tailgate and must measure exactly the width of your truck bed
  • Capacity: 1,000 lbs
  • Application: pickup trucks with 6' long beds
  • Ramp dimensions: 86" long x 10-7/16" wide
  • 1-Year warranty


Simple and Secure Loading

Keep your trailer hitch free for towing by carrying your motorcycle in the bed of your truck. Loading your bike into your pickup has never been easier. Just attach the ramp extensions to the main ramp and clamp your bike's front tire into the cradle at the ramp's base. Then, using the remote control, raise the cradle slowly. The rear tire of your motorcycle will track along the ramp as it's pulled up. Once the cradle begins to pull your bike into the truck bed, the entire ramp will pivot for a controlled transition. (The pivot tube required for this action is sold separately. Measure the width of your truck bed to determine which tube will best fit your application.)


When the motorcycle's front tire reaches the front of your truck bed, it is in position and ready to be secured. After tying down your bike, remove the ramp extensions and stow them in your truck bed.


SportLoader Video


SC3001 Blue Ox OverBilt Sport Loader - Short Box






Customers compare SC3001 to these similar products














Ask the Experts about this Blue Ox Truck Bed Accessories
Expert Answers about Blue Ox OverBilt SportLoader Motorcycle Lift and Carrier for Pickup Trucks with 6' Long Beds - SC3001                                            Do you have a question about this Truck Bed Accessories?


  • Can Blue Ox OverBilt SportLoader Motorcycle Lift and Carrier be Used in a 5-1/2 Foot Bed
  • I spoke with my contact at Blue Ox. She stated that the OverBilt SportLoader Motorcycle Lift and Carrier, # SC3001, can be used on a truck bed that is at least 61-1/2 inches long. Your 5-1/2 foot bed is 66 inches long, so it should fit according to Blue Ox. I have included a link to the installation instructions for you.
    view full answer...

  • Can Blue Ox OverBilt SportLoader Motorcycle Lift and Carrier, # SC3001, Hold a Honda Goldwing GL1800
  • I spoke with my contact at Blue Ox and the OverBilt SportLoader Motorcycle Lift and Carrier, # SC3001, has a 1,000 pound capacity. I know that the estimated wet weight of some Goldwings is around 900 pounds and depending on how it is equipped it could be heavier or lighter. I have linked the installation instructions for you.
    view full answer...

  • Availability of a Motorcycle Carrier that Can Carry a Trike
  • The Blue Ox OverBilt SportLoader Motorcycle Lift and Carrier # SC3001 that you referenced is not designed to work with trikes. The reason is because the ramp is not wide enough to fit the wide rear axle of a trike. We do have caddies that will allow you to transport your trike behind a tow vehicle though. Check out the Trailer Hitch Mounted Motorcycle Carrier with Jack and Swivel # RHMC1SV. This product will work to transport trikes and could be a solution for you.
    view full answer...

  • Can Tailgate be Installed on Truck Bed When Using Blue Ox SportLoader Motorcycle Carrier # SC3001
  • On the Blue Ox OverBilt SportLoader Motorcycle Lift and Carrier, part # SC3001, the tailgate cannot be reinstalled unless the SportLoader carrier is removed from the box of your pickup truck. The carrier attaches to a pivot tube that is installed on the factory tailgate mounts on the truck. To install the tailgate would require the carrier to be removed from the truck bed. Another option for hauling a motorcycle on your truck would be a hitch motorcycle carrier that will install into a vehicl
    view full answer...

  • Will the Blue Ox OverBilt SportLoader Motorcycle Carrier # SC3001 Fit on a 2004 Ford Ranger
  • I spoke with my contact at Blue Ox and she told me that the overall width of the OverBilt SportLoader Motorcycle Carrier, # SC3001, is 36-1/2 inches, so this will fit between the wheel wells on your 2004 Ford Ranger. Another measurement that you will want to check is the length of your truck bed without the tailgate. Your truck bed must be at least 61 inches long without the tailgate to install this carrier. If your bed is shorter than 61 inches, then I recommend using the Magneta Low-Profil
    view full answer...

  • Will 2011 Harley-Davidson Ultra Classic Fit Blue Ox OverBilt Motorcycle Carrier # SC3001 on F-150
  • My contact at Blue Ox advised that the OverBilt SportLoader Motorcycle Lift and Carrier, part # SC3001, can be used on a truck bed that is at least 61-1/2 inches long (with the tailgate removed). Your 5-1/2 foot bed is 66 inches long, so it should fit according to Blue Ox. For your reference I have included a link to the installation instructions for the OverBilt. As you noted, part of the carrier and your Ultra Classic will overhang the truck bed. Blue Ox advised me that they know of no res
    view full answer...

  • How Long is the Blue Ox OverBilt SportLoader Motorcycle Lift and Carrier for Short Bed Pickup Trucks
  • The tray on the Blue Ox OverBilt SportLoader Motorcycle Lift, # SC3001, is 86 inches long. If mounted using the furthest in holes to maximize how much of the bike is in the truck bed you will be looking at about 8 to 10 inches sticking out beyond the back edge of the truck bed. I have included a link to the installation instructions for you.
    view full answer...

  • Will Blue Ox Overbilt Motorcycle Carrier Work on a 2014 Dodge Ram Short Bed
  • I spoke to my contact at Blue Ox and he said that there will be about 4-6 inches of overhang beyond the back of your truck bed. Most likely that would not interfere with your trailer jack, but you might want to measure to be certain. I also asked about the length of your bed being 4 inches longer than 6 feet and he said you would just basically have an additional 4 inches in front of the carrier. For a 64 inch pivot tube you would want a Pivot Tube for Blue Ox OverBilt SportLoader Motorcy
    view full answer...

  • Dealer Installed Bedliner with Blue Ox SportLoader Motorcycle Lift on Ford F-150 Truck
  • I spoke with my contact at Blue Ox who said the dealer installed spray-in bed liner in your 2012 Ford F-150 will not affect OverBilt SportLoader Motorcycle Lift # SC3001 at all. I would also recommend the Retractable, Ratcheting Tie-Down w/ Cargo Buckle # SC9011, a simple-to-operate retractable strap and buckle, which quickly, easily and securely ties down your motorcycle to your Blue Ox OverBilt SportLoader. I have linked the installation details for you.
    view full answer...

  • Can You Tow a Travel Trailer with the Blue Ox Motorcyle Lift In the Bed of a 2011 Ford F250
  • Yes, thats actually one of the great benefits that the Blue Ox OverBilt SportLoader Motorcycle Lift and Carrier # SC3001 has. It allows you to carry your Honda Goldwing in the bed of the truck and still allows you to tow a trailer. The # SC3001 should work very well for you in the bed of your 2011 Ford F-250 with a short bed. I attached installation instructions for this product for you to check out also. You may need some tie-downs to secure your Goldwing. If so, check out the Blue Ox Ret
    view full answer...


Info for this part was:


Written by:
Lindsey S

Expert Research:
Michael H

Expert Research:
Jeff D

Expert Research:
Jameson C

Expert Research:
John H

Expert Research:
Adam R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.





Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email



Only 23 Hours 57 Minutes Remaining

etrailer.com reviewsetrailer.com reviews

All images, layout and content copyright etrailer.com