Call etrailer.com at 800-298-8924 for expert service. We are your Nissan transmission coolers experts, and offer a lowest price guarantee. etrailer.com carries a complete line of Derale products for your Nissan Frontier 2007. Derale Series 9000 Plate-Fin Transmission Cooler Kit w/ NPT Inlets - Class I -Extra Efficient part D13611 from Derale can be ordered online at etrailer.com. Complete transmission coolers installation instructions and technical support.
$71.95
Select Your Vehicle

View Cart



Transmission Cooler > 2007 > Nissan > Frontier

2007 Nissan Frontier Derale Series 9000 Plate-Fin Transmission Cooler Kit w/ NPT Inlets - Class I -Extra Efficient

Derale Transmission Coolers

(20 reviews)


Code:   D13611

Retail:$126.74

Price:$71.95


Shipping Special

Shipping Weight: 3 pounds

Quantity: 






2007 Nissan Frontier - Derale Series 9000 Plate-Fin Transmission Cooler Kit w/ NPT Inlets - Class I -Extra Efficient

11" Wide x 3-7/8" tall x 1-1/4" deep, radiator-style heat exchanger improves the performance and overall functioning of your Nissan Frontier's transmission. Includes hose-barb adapters to fit the 1/2" NPT inlets.


Features:

  • Prolongs life of transmission
  • Improves overall performance
  • Prevents heat-related failures
  • Has furnace-brazed aluminum construction and 1-1/4" wide turbulator plates for more efficient cooling
  • Includes complete mounting kit, OEM spec hose with stainless steel clamps, Insta-dapt radiator adapter and hose-barb fittings
  • Sleek design makes this ideal for use in compact cars


Specs:

  • Inlets: 1/2" NPT
  • Fittings: 1/2" NPT x 3/8" hose barb
  • Overall dimensions: 11" wide x 3-7/8" tall x 1-1/4" deep
  • Distance between inlets: 8-7/8"
  • Mounting dimensions: 6-3/4" wide x 3" tall
  • 1-Year warranty


Note: The Derale Insta-dapt radiator adapter fits most Nissan Frontiers with 5/16" transmission lines, but not all. In some cases, additional fittings or alteration of the OEM lines or hoses may be required for installation.


One of the more popular cooling systems available, the radiator-style, plate-and-fin heat exchanger provides increased surface area so that fluids can spread out along the finned chambers to cool faster. In addition to the increased surface area, this cooler also features turbulator technology, whereby fluids are agitated continuously, not only to facilitate heat transfer, but also to prevent any undesirable drop in pressure.

Dimensions

13611 Derale Series 9000 Plate and Fin Heat Exchanger with Installation Kit



D13611 Installation InstructionsInstallation Details D13611 Installation instructions

Video of Derale Series 9000 Plate-Fin Transmission Cooler Kit w/ NPT Inlets - Class I -Extra Efficient


Videos are provided As a guide only. Refer To manufacturer
installation instructions And specs For complete information.




Video Transcript for Derale Transmission Cooler D13611 Review

Today we are going to show you Derale Series 9000 plate-fin transmission cooler, part number D13611. In addition to the transmission cooler, you will also receiver the hose, the mounting kit and the line connection kit. This particular cooler uses NPT thread fittings on the top to help you with your connections. Transmission coolers are universal fit items. They are not vehicle specific. You need to measure your vehicle to see how much room you have to mount the cooler. The cooler should be mounted in front of the radiator and, if possible, in front of the AC condenser. This cooler measures about 10-1/2 inches wide by about 4 inches tall and it is right at 1-1/4 inches thick. Derale covers this cooler with a one-year warranty. That does it for the Series 9000 plate-fin transmission cooler kit, part number D13611.


Customer Reviews

Derale Series 9000 Plate-Fin Transmission Cooler Kit w/ NPT Inlets - Class I -Extra Efficient - D13611

Average Customer Rating:  4.7 out of 5 stars   (20 Customer Reviews)


11" Wide x 3-7/8" tall x 1-1/4" deep, radiator-style heat exchanger improves the performance and overall functioning of your vehicle's transmission. Includes hose-barb adapters to fit the 1/2" NPT inlets.


- D13611

by: lopez07/30/2014


i recived my Derale Series 9000 Plate-Fin Transmission Cooler Kit w/ NPT Inlets - Class I -Extra Efficient - D13611 and i really like it its well built and it look to be heavy duty and am looking forward to installing it.thanks again for a great item. 143509


Comments

Its excellent inproved the performance of my truck 100 I am a very satisfy customer.

lopez - 07/30/2015

13741



- D13611

by: terri h05/27/2014


Pretty easy to install. Arrived quickly too! I am happy with this purchase. 132429


Comments

Patrick, the product is fine. I have no complaints. Thank you, Terri

terri h - 05/28/2015

12150



- D13611

by: John C.11/18/2014

1990 Dodge


My original transmission cooler sprung a leak on my 1990 dodge pickup and a direct replacement couldn't be found. Etrailer had a cooler that would fit and do the job. Would highly recommend them to solve your problems and supply what's needed. 161616



- D13611

by: Cristobal Estebane08/15/2015


Fittings came contaminated with metal shavings from machining and wouldn't even fit in to the cooler really poor quality. If this is in the fittings who knows whats in the cooler. Complete waste of time do not buy 219532



- D13611

by: mike03/23/2015


would have been been better had the shipping dept. not covered a lot of the info printed on the out side of the box with NON-removable stickers. 180167



- D13611

by: steve06/01/2016


all re my bad all was in lg box separate small boxes 255440



- D13611

by: Skyler C03/10/2014


Perfect. Your company rocks. So helpful. Thank you. 120118



- D13611

by: Zack Martin10/03/2015


Great product at a good price. 228996



- D13611

by: William B06/11/2013


Extremely well made product. 84081



- D13611

by: TODD M.10/21/2013


EXCELLENT 104586



- D13613

by: P71toZ7103/31/2016

Review from a similar Derale Series 9000 in Transmission Coolers


My vehicle originally did not have a transmission cooler. After warming up, my transmission temperature would typically be 100 degrees higher than the ambient air temperature, whether moving or stopped. Towing the largest enclosed U-Haul trailer (6'x12') would raise the temperature to about 120 degrees above ambient. After adding this cooler, the transmission stays about 70 degrees higher than the ambient air temperature on the highway, and 80-85 degrees above ambient while parked or driving in slow traffic. I haven't towed that same U-Haul trailer since adding the cooler, but towing a much larger (8.5'x20') enclosed trailer raises the temperature to about 110 degrees above ambient. If you can find a spot the cooler will physically fit, it should work for your vehicle. You may have to get creative to solidly mount it. I used an angle grinder to remove part of a factory brace. When doing work in this area of your vehicle, be careful not to puncture the AC condenser! If you do, like I did, you will have to replace it. Some AutoZone locations will rent a vacuum pump and manifold gauge set. Doing your own repair means the total repair cost is only the sum of the new AC condenser and refrigerant. The inlet/outlet NPT fittings on this cooler need to be tighter than you think. I was worried about stripping the threads, and didn't tighten them enough at first. I ended up removing my bumper cover multiple times to tighten them until they stopped leaking. I found the best way to detect a leak was to zip-tie a folded paper towel below the fitting. If it turned red, there was a leak. For my application, I would have preferred built-in 3/8" hose barb inlets instead of the 1/2" NPT fittings. 242582



- D13613

by: Ben L10/01/2014

2006 GMC 1500

Review from a similar Derale Series 9000 in Transmission Coolers


2006 GMC 1500 This product is solidly designed and the installation kit well thought out. The connection hose was heavier and better quality than what the auto parts store could provide. I will be adding additional clamps to the connections so there are two on each just as a precaution against leakage. The single clamps are working well for my test period. I fabricated brackets for mine but using the plastic pins would work just as well. It is a huge improvement over the factory cooler. I would recommend it to anyone that is towing near or at truck capacity. 153950


Comments

The cooler is working flawlessly. I replaced the clamps with 12 PEX pipe crimps for a better seal. The transmission has operated within safe temps while towing 7000 lbs on I-70 over the Rocky Mountains. It is a worthy product!

Ben L - 10/29/2015

15726



- D13613

by: Jerry R02/28/2012

2005 Chevy Suburban

Review from a similar Derale Series 9000 in Transmission Coolers


Installed on a 2005 Chevy Suburban 5.3 V8 and took about 2 hours from start to finish. Installation was simple and was able to mount on the A frame in front of the radiator. Installation instructions was clear and was helpful with determine the supply and return lines. Fittings matched up perfect with no need to change out. I had to purchase another 4' of hose but the cooler was a lot simpler to install than I had expected. 32710



- D13612

by: Duane Albin02/28/2011

Review from a similar Derale Series 9000 in Transmission Coolers


Quick service and delivery, packed good, no damage. Would buy from again when the need arises. Installing the D13612 cooler on a Bolens HT20 tractor to help keep the hydraulic/hydrostat temperature down to normal operating range. Not finished yet with the installation. Duane 8055



- D13613

by: Dennis H05/03/2015

2011 Chevy Traverse LS

Review from a similar Derale Series 9000 in Transmission Coolers


Kind of an easy install on a 2011 Chevy Traverse LS. Fast shipping. Taking a long trip in a couple weeks towing a 3500 lb travel trailer. We'll see how it goes. Thanks for all of the products etrailer has supplied to make my LS tow ready! 189591



- D13613

by: Doc11/22/2013

Chevy Silverado

Review from a similar Derale Series 9000 in Transmission Coolers


Product really works well drop trans temp on Silverado from 160 to 125 degrees F. Could not find additional 11/32" tubing so Used 3/8" trans hose for connection- worked fine. Also I mounted on side with inlet at bottom to maximize cooling. 108166



- D13613

by: John08/27/2015

Review from a similar Derale Series 9000 in Transmission Coolers


Product received was as stated and shown on site. Can't wait to install this product. Hopefully putting an end to my tranny overheating problems. Will shop here again! 221978



- D13614

by: James11/12/2014

Review from a similar Derale Series 9000 in Transmission Coolers


Replaced Trans cooler on 1 ton. Temps running lot lower than stock cooler. 160621



- D13614

by: tool man04/22/2016

Review from a similar Derale Series 9000 in Transmission Coolers


great product from a great company of e trailer.com 246564



- D13614

by: Bill S06/19/2016

Review from a similar Derale Series 9000 in Transmission Coolers


great! works like they said fast shippi ng 262562



- D13612

by: John B08/23/2016

2009 Subaru Forester

Review from a similar Derale Series 9000 in Transmission Coolers


Kit had almost everything needed to install on my 09 Subaru Forester. The only extra thing I bought was another four foot length of hose. I made brackets out of metal I had on hand for a more secure mounting, and I installed the cooler with the ports facing the drivers side. I wanted to avoid sharp bends in the hoses so I made loops in both hoses to connect to the existing lines in my car. I also slid pieces of old garden hose over the new hoses at points where it was close to metal parts to avoid chafing of the hoses. The hose supplied with the kit was the correct diameter for my car and the hoses slid onto the existing fittings. I took my time with the install. I had to move the horn so I could position the cooler on the drivers side in front of the radiator and AC condenser. Routing of the hoses to the existing connections required some planning (and an extra hose) but everything else is very simple. Very nice kit! 286681

24
24


Ask the Experts about this Derale Transmission Coolers
Do you have a question about this Transmission Cooler?


  • Transmission Cooler Recommendations for a 1998 Chevrolet Silverado 4X4 5.7L
  • To determine what kind of transmission cooler you will need depends on how much weight you will be towing and where you will be towing. Also, you will want to check how much room you have in front of the radiator to be able to install the transmission cooler. If you will be towing a light load, less than 2000lbs, in flat driving conditions, your 1998 Chevrolet Silverado 4x4 5.7L will do fine with a class I rated cooler. If you will be towing more than a 2000lb load through some hills,...
    view full answer...

  • Transmission Fluid Temperature Gauge and Cooler Recommendation for a 2013 Dodge Caravan
  • For a temperature gauge you could use to monitor the temperature of the transmission fluid in your 2013 Dodge Grand Caravan I would recommend the # D13009 for a mechanical gauge. This will require you to drill into the transmission pan to install the fitting and sending unit. I attached a picture that shows how it installs on a transmission fluid pan. For a transmission cooler to help reduce the temperature of the tranny fluid you could use the Derale Series 9000 Plate-Fin Transmission...
    view full answer...

  • Which Transmission Cooler is Recommended for a 2005 Honda Pilot
  • Mounting a trans cooler in front of everything else, radiator and AC condenser, will yield the most cooling ability. The size of the heat exchanger is the factor that weighs most heavily on the cooling ability followed by location and construction/design. The best way to select a cooler is by considering the load you will be towing and the area you will be towing in. The cooler needed to aid in towing a single jet ski in a cool or moderate climate would not be nearly as big as the cooler...
    view full answer...

  • Transmission Cooler Recommendations for a 2011 Toyota Corolla
  • Both the Derale Series 9000 Plate-Fin Transmission Cooler Kit, # D13611 and the Derale Series 8000 Plate-Fin Transmission Cooler Kit , # D13501, would be a great choice for your 2011 Toyota Corolla. The general rule is that transmission fluid cannot be cooled too much, so using the largest cooler that will fit is a good idea, especially if towing. The only reason not to add the largest cooler possible, would be if you live in very cold climates where temperatures are below 0 degrees...
    view full answer...

  • Transmission Cooler Recommendation for a 2003 Acura MDX
  • I would suggest the largest plate and fin transmission cooler that will fit on your vehicle to provide the most cooling.Transmission coolers are flow through devices so you can pretty much use any transmission cooler you want as long as it will fit in your vehicle. You cannot cool the transmission fluid too much so there is no worry of installing a cooler that is too large. The only precaution with a very large cooler is to let the engine warm a bit on bitterly cold days before taking...
    view full answer...

  • Transmission and Oil Cooler Recommendations for a 2011 Honda Accord Crosstour
  • Congratulations on the new car. I will be happy to help you find some coolers that will fit your needs. For a transmission cooler, you can go with something small that will not take up a lot of space. I recommend the Derale Series 9000 Plate-Fin Transmission Cooler, # D13611, which measures 11 inches across, 3-7/8 inches tall, and 1-1/4 inches deep. This cooler is rated for up to 2,000 pounds so it would work well for your application. For an oil cooler, I recommend the Derale Stacked-Plate...
    view full answer...

  • Can I Tow a Boat and Trailer that Weighs 1,255 lbs with a 2008 Ford Taurus
  • I do not see any reason why you would not be able to tow a 1,255 pound boat and trailer with a 2008 Ford Taurus. You should check your vehicle owner manual and make sure that the gross trailer weight and the tongue weight of the boat, loaded and ready to tow, are within the vehicle limits. We have the Hidden Hitch Trailer Hitch for the 2008 Taurus by Ford, item # 87108, which has a 3,500 pound weight carrying capacity and would be plenty of hitch to tow the boat you mentioned, as long...
    view full answer...

  • Which Line Is Transmission Fluid Return Line on 2009 Chevrolet Tahoe
  • Typically the return line of the transmission is the one at the bottom of the cooler. You can do a small test to determine which line is the return line. First, start engine while engine is cold. Put the transmission in drive for no more than 10 seconds Stop engine Feel the both of the lines, and whichever one is cooler is the return line that is taking the fluid back to the transmission. To install the cooler you selected, Derale Transmission Cooler, part # D13611, you will also...
    view full answer...

  • Can the Edge Insight Monitor Transmission Fluid Temperature on a 2004 Toyota Camry
  • The transmission temperature on your 2004 Toyota Camry should run through the computer and be accessible through the OBD-II port using the Edge Insight, # EP84130. The parameters that you could potentially monitor include: Battery Voltage Intake Air Temperature (IAT) Engine Oil Pressure (EOP) Engine Coolant Temperature (ECT) Engine Oil Temperature (EOT) Transmission Fluid Temperature (TFT) Miles Per Hour (MPH) Miles Per Gallon (MPG) Revolutions Per Minute (RPM) 1/4-mile and...
    view full answer...

  • Recommended Transmission Cooler for 2006 Saturn Vue 4WD
  • Although the Derale # D13611 transmission cooler would work well with your Saturn Vue, we typically recommend using the largest cooler that will fit behind the grille of your vehicle. The ideal mounting location is directly behind the grill, in front of the radiator and A/C condenser. Because a transmission cooler allows airflow through it, there is not a worry that it will block or hinder the operation of the radiator or condenser behind it. A larger cooler like part # D13502, which...
    view full answer...

  • Transmission Cooler Recommendation for 2008 GMC Yukon
  • A transmission cooler is exactly what you need to keep the transmission fluid at an ideal temperature which is below 200 degrees. Ideally, you'll want to get the largest cooler that will fit into the available space. The best spot to install a cooler is directly behind the front grille, in front of the radiator and the a/c condenser. The Derale # D13504 would be ideal if you have enough room to accommodate its 11 inch wide by 12 inch tall size. The cooler would tap into the return line...
    view full answer...

  • Can Transmissions and Engine Oil Coolers be Mounted Vertically
  • As long as the fins on the Derale Cooler # D15604 or # D13611 are facing out so they can get airflow then you can mount them vertically if you needed to. I have included a link to a video review of transmission cooler # D13611 for you and an FAQ on oil coolers for # D15604.
    view full answer...

  • Bypassing OEM Radiator on 2005 Nissan Pathfinder
  • The Derale transmission coolers we sell are intended as a supplemental cooler that is meant to augment the factory transmission cooler portion of the radiator, not replace it entirely. If you are experiencing the common problem with the radiator leaking causing the engine coolant to contaminate the transmission fluid, your best bet really would be to have the original radiator replaced. I did a Google search using the keywords Nissan Radiator Problem and found that Nissan has extended...
    view full answer...

  • Will Hidden Hitch Class III Hitch # 87626 Fit 2011 Ford Escape Without Exhaust Modifications
  • The Hidden Hitch Class III 2 Inch Hitch, part # 87626, will fit your 2011 Ford Escape without modifying the exhaust damper. I am including a link to the installation instructions. On the installation instructions, page one of the instructions is for installing on a Escape that already has the factory Class II 1-1/4 inch installed. The M12 bolts are used to go into existing weld nuts on the vehicle. Page two of the instructions is for an Escape that does not have the factory Class...
    view full answer...

  • Can the Average Do-It-Yourselfer Install a Transmission Cooler on a 2007 Chrysler Town and Country
  • Installing a transmission cooler is not very difficult and I have every confidence that you will be able to install the Derale Transmission Cooler, # D13611, on your 2007 Chrysler Town and Country. Make sure you have the necessary tools. Your mechanical skills should serve you well for this installation. I can give you some installation tips. Transmission coolers are designed to be mounted flush against either the radiator or the AC condenser core. For maximum cooling ability, the heat...
    view full answer...

  • Transmission Cooler Application For A 2005 Honda CR-V Towing A 1,500 Lb. Camping Trailer
  • The Derale Series 9000 Plate-Fin Transmission Cooler, part # D13611, will fit your 2005 Honda CR-V. It is a Class I transmission cooler which means it is designed to be used when towing up to 2,000 lbs. It will work when towing your 1,800 lb. camping trailer. It measures 11 inches wide x 3-7/8 inches tall x 1-1/4 inches deep. I would recommend the Derale Series 8000 Plate-Fin Transmission Cooler, part # D13502. This is a Class II transmission cooler which is rated for towing up to 3,500...
    view full answer...

  • Transmission Cooler Recommendation for a 1997 Honda CRV with Best Cooling and Ease of Installation
  • I would recommend the Derale Series 8000 Plate-Fin Transmission Cooler Kit, item # D13502, for your 1997 Honda CRV. This cooler will be more than adequate for towing the weights you will be towing. You can not cool transmission fluid too much so the larger the cooler is, the better. We have a video installation of this cooler on a 2006 Honda CR-V that will be very similar to the installation on your 1997 model, see link. If you would like a smaller cooler you could go with the Derale...
    view full answer...

  • Will Aftermarket Radiator Solve Leaking Transmission Cooler Problems in 2006 Nissan Xterra
  • From what I can recall, the problem with the mid 2000's Nissan truck radiators was that the combined transmission cooler/radiator would develop a leak that allowed coolant to mix with the transmission fluid, which damaged the transmission. Installing an 'OEM quality' aftermarket radiator with the integrated transmission cooler is the recommended repair, which will solve the leakage problem. Over the years, we've gotten numerous questions about this from folks who just want to cap...
    view full answer...

  • Do I Need A Transmission Cooler When Towing A 2003 Saturn LW300 With A Motorhome
  • Using a transmission cooler on your motorhome when towing a vehicle would definitely help limit the wear and tear on the transmission. The Derale Transmission Cooler, # D13611, is designed for compact cars so I would recommend the Derale Transmission Cooler, # D13504, which is designed for larger vehicles. You will want to make sure that you will have room in front of your a/c condenser or radiator to install the heat exchanger. If you are asking about installing the Derale Transmission...
    view full answer...

  • Transmission Cooler Recommendation for a 2010 Honda Accord
  • When choosing a transmission cooler, there are several factors that go into deciding the best one for your needs. This includes how much weight you will be towing with your 2010 Honda Accord, the terrain you will be driving on, the distance you will be towing, and the available location a cooler can be installed in order to keep the transmission fluid in the optimum temperature range (160 to 200 degrees F). A class I cooler like # D12901 or # D13611 that you have referenced would be...
    view full answer...

  • Transmission Cooler for a 2016 GMC Terrain Denali with 3.6 Liter V8
  • Yes you can use the Derale transmission cooler # D13611 on your 2016 GMC Terrain. The cooler will help the fluid run at a lower temperature which is better for the transmission so that you will get the most life out of it. Installation is not all that difficult. Take a look at the video I have linked showing an example installation on a vehicle. Installation will be similar on your Terrain.
    view full answer...

  • Transmission Cooler Recommendation and Installation on a 2011 Chevrolet Silverado 4.7L
  • The plate-fin transmission coolers are more efficient than the tube-fin transmission coolers. Both types of coolers operate the same, but the plate-fin coolers uses smaller plates to allow more fluid to contact the aluminum surface inside the cooler. More surface contact results in greater heat dissipation. I have attached two FAQ articles on transmission coolers for you to check out. When choosing a transmission cooler, we always recommend installing the largest transmission cooler...
    view full answer...

  • Recommend A Transmission Cooler and Fittings For 1997 Mercury Grand Marquis
  • The item you selected, the Derale Transmission Cooler, part # D13611 will work on your 1997 Mercury Grand Marquis as long as you have room to mount it on your vehicle. The ideal place to mount a transmission cooler for maximum cooling efficiency is behind the grill of your 1997 Mercury Grand Marquis but in front of the radiator. Part # D13611 is a plate and fin cooler and is very effective in cooling the transmission fluid. You will want to measure at the front of your vehicle to...
    view full answer...

  • Recommendation For Transmission Cooler on a 2007 Jeep Liberty 3.7L Engine
  • On a transmission cooler there are three basic types of heat exchangers. The most efficient is the stacked plate. The next one is the plate and fin, which is very efficient. Then, the tube and fin which is moderately efficient. It will also matter where the heat exchanger is installed. The best spot for the greatest efficiency is between your vehicles grille and the AC condenser core on your 2007 Jeep Liberty. The next best spot is between the AC condenser and the radiator. This spot...
    view full answer...

  • Derale Transmission Cooler Recommendations For 2008 Chrysler Town and Country w/4.0L Engine
  • The Derale Transmission Cooler you selected, part # D13611, would work on your 2008 Chrysler Town and Country as long as you have room to mount it. I would recommend the Derale Series 8000 Plate-Fin Transmission Cooler Kit, part # D13502, for your vehicle as it is much thinner. Part # D13502 measures 11 Inches wide, 7-1/4 Inches Tall, and 7/8 Inches Deep. You will want to measure on your vehicle to make sure you have room to mount the cooler. The most efficient and recommended spot...
    view full answer...

  • Recommended Transmission Cooler for 1994 Nissan Pathfinder
  • I typically recommend choosing the largest transmission cooler that will fit into the available space. The best place to install a transmission cooler is directly behind the grille, in front of the radiator and A/C condenser. Choosing the largest available cooler like part # D13503 is a good choice, because you cannot over-cool a transmission. The cooler measures 8 by 11 inches, and is 7/8 of an inch thick. The cooler installs inline with the transmission return line that runs from...
    view full answer...

  • Larger Transmission Cooler Recommendation to Replace Small One Where Fluid Still Gets Hot
  • The transmission cooler part # D13611 that you referenced is a pretty small cooler. Since you are towing on steeper grades a larger cooler would be your best option. If you can fit the part # D13503 instead of what you currently have this would be a much better option. This cooler measures 11" Wide x 8-3/4" tall x 7/8" deep. Basically the larger the cooler the more efficient it will be at cooling the fluid. Since you already have the hard part done of installing a cooler all you would...
    view full answer...

  • Transmission Cooler Recommendation to Replace a Faulty Cooler in a 2006 Nissan Xterra
  • Aftermarket transmission coolers are typically marketed as supplemental coolers, not replacement coolers. If you are looking to replace your OEM transmission cooler due to a leaky or damaged cooler, then you will want to install the largest transmission cooler that will fit in the space available. The ideal place to install this cooler would be in front of the AC condenser or radiator to allow for adequate air flow. I would recommend looking at the Derale Series 9000 Plate-Fin Cooler,...
    view full answer...

  • 2011 Nissan Maxima Transmission Cooler Installation Recommendations
  • The Derale Series 9000 Plate-Fin Cooler # D13611 would be an excellent choice for use on your 2011 Nissan Maxima. Transmission coolers are not vehicle specific, but there are coolers that are recommended based on available mounting locations of your vehicle. It is always recommended to use the most efficient mounting location that is possible. Typically this is located between the AC condenser core and the grille. If the ideal and most efficient mounting location is not possible, then...
    view full answer...

  • Recommended Transmission Cooler For 1999 Honda Accord With 2.3L Engine
  • The transmission cooler I recommend for your 1999 Honda Accord with the 2.3L engine is the Derale Transmission Cooler, part # D13503. This is a Class lll plate-fin cooler that will prolong the life of your transmission and help improve overall performance. This system comes with the hose, stainless steel clamps and radiator adapter. If space is limited on your Accord, you can take a look at one of the shorter coolers like part 3 D13611. I have attached some helpful articles that...
    view full answer...


Do you have a question about this Transmission Cooler?






Why etrailer.com?

At etrailer.com we guarantee:


Highest quality transmission coolers for the best price.


Real product know-how.

  • We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. This helps you get the right product the first time.
  • Every day our teams test, review, assemble and install our products. Our modern installation facilities allow our expert installers and customer service representatives to actually install and use the items we sell, so you can get real advice, from a real person who has the knowledge and expertise needed to solve your problem.

Most detailed, accurate transmission cooler information available.

  • Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.

Information for this part was:

Photos by:
Theodore B
Expert Research:
Michael L
Updated by:
DeAnne T
Expert Research:
Robert G
Video Edited:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Rachael H

Installations, made easy.

  • We love helping people.
  • We have the most highly trained customer service, hands-on experience, step by step videos and installation instructions. We are prepared to answer any question, give advice, or troubleshoot any problem you come across.

Fast shipping.


Personalized service for life.

  • We provide one-on-one, personalized service from the ordering process through the life of your product.

Trusted since 1946.

  • We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.

Info for this part was:


Photos by:
Theodore B

Expert Research:
Michael L

Updated by:
DeAnne T

Expert Research:
Robert G

Video Edited:
Patrick B

Expert Research:
Michael H

Expert Research:
Jeff D

Expert Research:
Reno H

Expert Research:
Jameson C

Expert Research:
John H

Expert Research:
Adam R

Expert Research:
Rachael H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.







Stay Connected


Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email






etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com