This 3-leaf double-eye spring is 25-1/8" long x 1-3/4" wide. It is designed for use with 2,500-lb trailer axles. Lowest Prices for the best trailer suspension from Universal Group. 3-Leaf Double-Eye Spring for 2,500-lb Trailer Axles part number SP-219275 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
$18.99
Select Your Vehicle

View Cart


Trailer Suspension > Leaf Springs > For Double Eye Springs > For 1-3/4 Inch Wide Spring > 2500 lbs > 3 Leaf > 25-1/8 Inch Long > Universal Group

3-Leaf Double-Eye Spring for 2,500-lb Trailer Axles

Universal Group Trailer Suspension

(5 reviews)


Code:   SP-219275

Retail:$23.98

Price:$18.99


Shipping Special

Shipping Weight: 10 pounds

Quantity: 






Universal Group Trailer Suspension - SP-219275

This 3-leaf double-eye spring is 25-1/8" long x 1-3/4" wide. It is designed for use with 2,500-lb trailer axles.


Features:

  • Flexes to absorb road shock and provide smooth ride
  • Reduces wear and tear on trailer
  • Ensures level ride on bumpy and uneven surfaces
  • Mounts to trailer frame with hangers or a hanger kit (sold separately)
  • Includes nylon bushings


Specs:

  • Number of leaves: 3
  • Spring length: 25-1/8"
  • Spring width: 1-3/4"
  • Eye diameter: 9/16"
  • Spring capacity: 1,250 lbs
  • Axle capacity: 2,500 lbs
  • Quantity: 1 spring


Note: To ensure proper axle alignment and suspension performance, leaf springs should always be replaced in pairs.


Leaf springs are an integral part of your trailer suspension system. The double-eye spring is suspended at the ends by hangers that attach to its eye or, in the case of tandem-axle or triple-axle systems, into hangers in the front and rear and an equalizer or equalizers in the center. To determine the type of hangers or hanger kit you need, you must know the specific type of leaf spring you have, as well as your axle diameter and capacity. Depending on the hanger kits used with them, springs can be configured to work for single-, tandem- or triple-axle applications.



UNA-219 Trailer Double Eye Spring - 3 Leaf - 1,250 lbs

Replaces PR722








Related Products



Customers compare SP-219275 to these similar products





Customers Who Purchased This Trailer Suspension Also Bought...





Economy
$6.00 Less

3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles


3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles
Universal Group Trailer Suspension

21 reviews

Code: SP-169275


Retail:$23.19

Price:$12.99


20-3/8 Inch Long

2000 lbs



This 3-leaf double-eye spring is 20-3/8" long x 1-3/4" wide. It is designed for use with 2,000-lb trailer axles.

more information →
Value
$1.00 More

4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles


4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles
Universal Group Trailer Suspension

22 reviews

Code: SP-212275


Price:$19.99


4 Leaf

3500 lbs



This 4-leaf double-eye spring is 25-1/8" long x 1-3/4" wide. It is designed for use with 3,500-lb trailer axles.

more information →
Premium
$28.96 More

Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear/Center


Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear/Center
Dexter Trailer Suspension

80 reviews

Code: APT5


Retail:$89.80

Price:$47.95


Suspension Kit

Tandem Axle

Dexter



Leaf-spring mounting kit includes 3-1/4" tall front, center and rear hangers and necessary hardware. Equalizers are 7-3/4" long. Components for mounting axle to springs sold separately.

more information →


Video of 3-Leaf Double-Eye Spring for 2,500-lb Trailer Axles


Videos are provided As a guide only. Refer To manufacturer
installation instructions And specs For complete information.




Video Transcript for Universal Group Trailer Suspension SP-219275 Review

Today, we are going to be taking a look at the 3-leaf double-eye spring for 2,500 pound trailer axles. It's made from a nice, steel construction. Very strong, durable design. Now, these we're designed to flex. That way it absorbs road shock and it's going to provide an overall smoother ride. It's also designed to reduce wear and tear on the trailer.

Now, this is going to ensure a nice, level ride on bumpy and uneven surfaces. It mounts to the trailer frame with hangers or a hanger kit. Those items are sold separately. If you are in need of hangers or a hanger kit, you can find them right here at etrailer.com. The nylon bushings in the eyes are included. Pre-installed, already in there.

This is going to contain 3 leaves. It's going to offer a spring capacity of 1,250 pounds. It's designed for 2,500 trailer axles. Now, a few measurements to go over with you real quick. The most important one's going to be the spring length. Now, the spring length is taken from the center of one eye to the center of the other.

If we place a ruler on there and do that measurement, that's going to give us a measurement of 25 1/8 inches. The spring width, that's just measuring from edge to edge, that's going to measure 1 3/4 of an inch. Then, the eye diameter is 9/16 of an inch. Now, to ensure proper axle alignment and suspension performance, please keep in mind that leaf springs should always be replaced in pairs. That's going to do it for today's look at the 3-leaf double-eye spring for 2,500 pound trailer axles.


Customer Reviews

3-Leaf Double-Eye Spring for 2,500-lb Trailer Axles - SP-219275

Average Customer Rating:  5.0 out of 5 stars   (5 Customer Reviews)


This 3-leaf double-eye spring is 25-1/8" long x 1-3/4" wide. It is designed for use with 2,500-lb trailer axles.


- SP-219275

by: Matt H.08/05/2016


The leaf springs arrived quickly, and were the exact make sold by a reputable local firm. I used them to replaced broken springs on my old trailer. They and fit well. I now have an operable and safe trailer again. Thanks etrailer. 279883



- SP-219275

by: Glenn s08/14/2016


Great product, super price, and really fast shipping makes etrailer top on my list for any trailer parts I may need in the future. I purchased leaf springs for a trailer I'm building and they are a perfect fit. Thanks etrailer 283726



- SP-219275

by: Scott J08/20/2016


Parts came faster than expected and were what they were advertised to be. I priced the parts around and etrailer had best overall price including the shipping. 285868



- SP-219275

by: tippy08/07/2016


I buy a lot online and this gets a 10 for prompt deliverly. installed easily and works great.my trailer is new again.wiil buy from etrailer.com again. 280886



- SP-219275

by: Leadfinger08/29/2016


These springs were a perfect fit and easy to install. I replaced the bolts and shackles as well for a complete new suspension on my boat trailer. 288888

5
5


Ask the Experts about this Universal Group Trailer Suspension
Do you have a question about this Trailer Suspension?


  • Can Unique Leaf Springs be Replaced on a Very Old Trailer
  • I believe the hubs are for 2,000 or 2,200 pound agricultural axles which is why the springs look so different. These hubs are designed for very low speed applications (5 to 10 miles per hour according to HADCO) so if you plan on going faster than that you will need to look at replacing the axle and hubs. You could use 2 of spring # SP-219275. Each spring has a capacity of 1,250 pounds. If a new hanger kit is needed you can use # APS1. When used with spring SP-219275 the center to center...
    view full answer...

  • Replacement Leaf Spring Recommendation for Trailer with 25-1/8 inch Springs and 2k Capacity
  • Most likely the measurement is 25-1/8 inch as that is a common size. But in most cases we recommend measuring the spring with it off the trailer and typically there is a bit of stretch to old springs by around 1/2 inch or so. The spring you would want is the part # SP-219275 as it matches the capacity needed closely and it has a length of 25-1/8 inches like you have. When picking out leaf springs priority one is picking out the correct capacity and then finding a spring that is close...
    view full answer...

  • Replacing Inverted Leaf Spring Suspension on Old Utility Trailer
  • The first thing you will want to do is to remove the current springs from the frame and the axle. You can still use your axle if it is in good working order, but you will also want to remove any hardware welded to the axle. To install leaf springs, you will first want a hanger kit. For your single axle trailer, I recommend Redline's Single-Axle Trailer Hanger Kit for Double-Eye Springs # APS1. This hanger kit will have a 1-1/2 inch drop for the front hanger, and a 7/8 inch drop for...
    view full answer...

  • Replacement Double-Eye Leaf Springs Recommendation
  • The longest double leaf spring we offer is part # PR427, and has 4 leaves. This leaf spring measures 27 inches center of eye to center of eye. This fits an axle with a capacity of 3,000 lbs. You should measure the center of the spring eye-to-eye and choose a leaf spring replacement about an inch shorter. If you are replacing older leaf springs, the eye to eye dimension may be a little longer on the old spring due to sag and wear. For a 3 leaf spring and for a 2,500 lb trailer axle, you...
    view full answer...

  • How Much Space Should be Between the Top of the Axles and the Bottom of a Boat Trailer
  • Normally when using hanger kit # AP233-H248 with spring # SP-219275 the distance from the bottom of the frame to the center of the axles is going to be approximately 4-1/2 inches. Subtract half the width of the frame then to the top of the axles that would be 3-5/16 inches. Two inches might work out fine depending on how far the suspension travels but more height would likely be needed considering the heavier load. Hanger kit # APT4 would provide more height since it has taller hangers...
    view full answer...

  • Double-Eye Leaf Spring for a Trailer Rated for 1 Metric Ton 2,200 Pounds
  • Since a metric ton is approximately 2,200 pounds you will need to go with leaf springs that are rated for at least 1,100 pounds. I recommend spring # SP-219275 which is rated for 1,250 pounds. With one of these springs on each side of the trailer the capacity will be 2,500 pounds. I have included a link to a video review of this spring for you and a link to our help article on double-eye suspension.
    view full answer...

  • Replacement Leaf Springs for a Boat Trailer Rated for 3,740 Pounds Gross Trailer Weight
  • The double-eye spring we have that is closest to the measurements you have provided is # SP-256275. It measures 26 inches eye center to eye center, is 3-3/4 inches from the top center of the stack to the centerline of the eyes, and has 6 leaves. The spring has a capacity of 2,250 pounds. If you can tell me the center to center distance between the hangers then that can help determine the right replacement spring, too. This spring uses 9/16 inch bolts such as # 166081. The hanger that...
    view full answer...


Do you have a question about this Trailer Suspension?






Why etrailer.com?

At etrailer.com we guarantee:


Highest quality trailer suspension for the best price.


Real product know-how.

  • We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. This helps you get the right product the first time.
  • Every day our teams test, review, assemble and install our products. Our modern installation facilities allow our expert installers and customer service representatives to actually install and use the items we sell, so you can get real advice, from a real person who has the knowledge and expertise needed to solve your problem.

Most detailed, accurate trailer suspension information available.

  • Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.

Information for this part was:

Installed by:
Cole B
Written by:
Alexander C
Photos by:
Stacy F

Installations, made easy.

  • We love helping people.
  • We have the most highly trained customer service, hands-on experience, step by step videos and installation instructions. We are prepared to answer any question, give advice, or troubleshoot any problem you come across.

Fast shipping.


Personalized service for life.

  • We provide one-on-one, personalized service from the ordering process through the life of your product.

Trusted since 1946.

  • We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.

Info for this part was:


Installed by:
Cole B

Written by:
Alexander C

Photos by:
Stacy F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.







Stay Connected


Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email






etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com