Equalizer for 2" Wide Slipper Springs - 13-1/8" Long - 7/8" Center Hole

TruRyde Trailer Suspension - TREQ1344

13-2/15" Long equalizer connects slipper springs on tandem- or triple-axle trailers and allows for enough movement between the axles to keep the ride smooth and the load undisturbed. Fits springs with 9/16" diameter eye.

Features:

• Connects slipper springs on dual- or triple-axle trailers
  • Slip arched end of front spring into equalizer so that it rests on keeper bolt (sold separately)
  • Attach rear-most spring with shackle bolt (sold separately) through the eye
• Suspends from center hanger (sold separately)
• Transfers load and sudden impacts from one axle to another by permitting movement between the axles
  • Distributes weight evenly
  • Constructed of high-quality, 1/4" thick, hot rolled steel
  • Results in smooth ride for trailer

Specs:

• Fits 2" wide slipper leaf springs
• Center bolt hole diameter: 7/8"
• Side bolt hole diameter (for mounting spring): 9/16" diameter
• Side bolt hole diameter (for keeper bolt): 3/8"
• Dimensions: see diagram

EQ-1344 TruRyde Equalizer for 2" Slipper Springs - 13-1/8" Long

Replaces 13-44 Equalizer for 2" Slipper Springs - 13-1/8" Long

Customers compare TREQ1344 to these similar products

Equalizer for 2" Wide Slipper Springs - 11-1/2" Long - 7/8" Center Hole$19.95

5-Leaf Slipper Spring for 7,000-lb Trailer Axles$36.95

Equalizer for 2" Wide Slipper Springs - 13-1/8" Long - 1" Center Hole$70.95

Swan-Shaped Equalizer for 2" Wide Slipper Springs - 10-1/8" Long - 7/8" Center Hole$32.95

Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 9-5/8" Long Equalizers$107.95

Customers Who Purchased This Trailer Suspension Also Bought...

Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long $2.98

Wet Equalizer Bolt with Castle Nut and Grease Zerk - 4-11/16" Long - 7/8" Diameter $7.30

2-1/4" Long Torx Trailer Floor and Wall Liner Screw for ACQ Treated Wood $0.24

Spring Keeper Bolt for Slipper Springs - 3-1/4" Long $0.83

5-Leaf Slipper Spring for 7,000-lb Trailer Axles $36.95

Ask the Experts about this TruRyde Trailer Suspension
Do you have a question about this Trailer Suspension?

• Bolt Recommendations for a Equalizer for 2 inch Slipper Springs
  
• For the Equalizer for 2 inch Wide Slipper Springs # TREQ1344 you will want to use a Wet Equalizer Bolt with Castle Nut and Grease Zerk # TRFA71063 for the center bolt hole. This bolt has a grease (zerk) fitting. For the side bolt hole that the spring will mount to you will want to use a Spring-Eye Bolt with Locknut # 166079. For a keeper bolt you would want a Leaf Spring Center Tie Bolt with Nut # 38-4TB. I attached an FAQ article on slipper spring suspension setups for you to check out
  view full answer...