Redline Trailer Suspension - APTT6SE
Leaf-spring mounting kit includes 3-3/4" tall front hangers, 3-3/8" tall center hangers, 5-1/6" tall rear hangers and necessary hardware. Equalizers are 12" long. Components for mounting axle to springs sold separately.
Features:
- Attaches 6 leaf springs (sold separately) to your trailer frame
- Use table below to determine hanger location based on type of leaf springs
- Achieves 4-3/4" clearance between trailer frame and axle, depending on axle size
- Includes:
- (2) 3-3/4" Tall front hangers (721584)
- (4) 3-3/8" Tall center hangers (721586)
- (2) 5-1/6" Tall rear hangers (721585)
- (4) 12" Long straight equalizers (E5541)
- 7/8" Diameter center hole for mounting to hanger
- 9/16" Diameter side hole for attaching to spring
- (12) 3-1/2" Long x 9/16" diameter shackle bolts (91635B)
- (12) 9/16" Diameter locknuts (916DLN)
- (4) 4-11/16" Long x 7/8" diameter equalizer bolts (7845B)
- (4) 7/8" Diameter castle nuts for 7845B (78CN)
- (4) 2-1/4" Long cotter pins for 7845B (165649)
- Designed for use on trailers with triple, 3,500-lb to 8,000-lb axles
- Does not include components for mounting axle to springs
| Leaf Springs | A - Distance Between Front and 1st-Center Hangers | B - Distance Between Center Hangers | C - Distance Between 2nd-Center and Rear Hangers | D - Distance Between U-Bolts | E - Distance Between Center of Axle and Trailer Frame | Axle Diameter |
|---|
| 803T3, 1203T3, 1403T3 | 29" | 33-1/2" | 29" | 33-1/2" | 4-3/4" | 3"
(typical 5,200-lb to 7,200-lb trailer axle) |
| E5226 | 29-1/2" | 34" | 29-1/2" | 34" | 4-3/4" | 3"
(typical 5,200-lb to 7,200-lb trailer axle) |
| E5115 | 32" | 36-1/2" | 32" | 36-3/4" | 4-3/4" | 3"
(typical 5,200-lb to 7,200-lb trailer axle) |
APTT6SE Triple Axle Hanger Kit - 2" Slipper Springs - 3,500 lbs to 8,000 lbs
Customers compare APTT6SE to these similar products
Customers Who Purchased This Trailer Suspension Also Bought...
Ask the Experts about this Redline Trailer Suspension
Do you have a question about this Trailer Suspension?
- Replacement Double Eye Springs and Suspension Kit for a Triple Axle Trailer
- All of the hanger kits we have for double eye springs are going to be for 1-3/4 inch wide springs because that is what the majority of double eyes are presently. What you can do is replace the springs which would allow you to use the right hanger kit and provide you with all new suspension parts which is the ideal way to go.
We carry one 26 inch long spring measured from the center of one eye to the center of the other eye. It is # PR626. Each spring has a capacity of 2,250 pounds. However, s
view full answer... 
