Bargman LED, Recessed, Double Tail Light - 84, 85 Series - Red and Amber - Black Base

Bargman Trailer Lights - 47-84-518

9-13/16" Long x 6-15/16" wide x 1-1/4" thick; 84 and 85 Series; 2-light fixture; red combination brake, tail and turn light; amber turn signal light; long-lasting LEDs; black base; 2-wire design; recessed mount.

Features:

• 2-Light fixture has red tail light and amber turn signal light
  • Red light functions as combination brake, tail and turn signal light
  • Amber light functions as turn signal only
• LEDs last longer and burn brighter than incandescent lights
  • Low power consumption
  • Quick activation - LEDs respond faster than incandescent bulbs
• Tail light can be mounted either horizontally or vertically
• Stylish black base has rounded corners
• Pre-wired design - power and ground wires
• Department of Transportation compliant
  • Meets FMVSS/CMVSS 108 requirements

Specs:

• Dimensions: 9-13/16" long x 6-15/16" wide x 1-1/4" thick
• Overall depth: 1"
• Cutout dimensions: 8-7/16" long x 5-1/2"
• Installation: recessed mount
• Limited lifetime warranty

With brighter and faster illumination than incandescent bulbs, light emitting diodes are setting the new standard in automotive lighting. LEDs illuminate faster upon activation than incandescent bulbs, giving motorists behind you a better indication of when you're braking or turning and thus boosting their response time. These efficient little lights are environmentally friendly, too. With six times the life expectancy and ten times less power consumption than incandescent bulbs, the choice is obvious.

47-84-518 Bargman LED Recessed Double Tail Light - 84, 85 Series - Red Stop/Tail/Turn, Amber Turn with Black Base

Customers compare 47-84-518 to these similar products

Bargman LED, Surface Mount, Double Tail Light - 84, 85 Series - Red - Black Base$62.95

Bargman LED, Surface Mount, Double Tail Light - 84, 85 Series - Red and Amber - Black Base$72.95

Bargman Triple Tail Light - 84, 85 Series - Red and Amber LED, Incandescent Backup - Black Base$67.95

Bargman LED, Recessed, Double Tail Light - 84, 85 Series - Red - Black Base$66.95

Bargman LED, Recessed, Double Tail Light - 84, 85 Series - Red LED, Incandescent Backup - Black Base$46.95

Customers Who Purchased This Trailer Lights Also Bought...

Sealed, Miro-Flex, Thin Line, LED Trailer Marker, Clearance or ID Light, 4 Diode - Red w/ Clear Lens $9.75

Black Bracket and Single Wire Plug for Thin Line Series Trailer Clearance and Side Marker Lights $1.85

Sealed, Miro-Flex, Thin Line, LED Trailer Marker/Clearance/ID Light, 4 Diode - Amber w/ Clear Lens $9.75

Two Wire Plug for Thin Line Series Trailer Clearance and Side Marker Lights $1.25

Rectangular LED Trailer Clearance, Side Marker Light with Reflector, 1 Wire, 6 Diode - Amber $6.95

Replacement parts available for this product

Replacement LED Module for Bargman LED Tail Light - 84, 85, 86 Series - Red $41.95

Replacement LED Module for Bargman LED Tail Light - 84, 85, 86 Series - Amber $41.95

Ask the Experts about this Bargman Trailer Lights
Do you have a question about this Trailer Lights?

• What are the Dimensions of Bargman Red and Amber LED Trailer Tail Light with Black Base 47-84-518
  
• I contacted Bargman and the part # 47-84-518 light measures, overall, 9-13/16 inches X 6-15/16 inches X 1-1/4 inches.
  view full answer...


• What Are The Dimensions Of Bargman Trailer Light, # 47-84-518
  
• I called Bargman and they gave me the dimensions on the Bargman Trailer Light, # 47-84-518. It measures 9-13/16 inches X 6-15/16 inches X 1-1/4 inches overall. The individual lights measure 4-1/4 inches X 5-5/8 inches. I am sending a link to the picture of the light with the dimensions listed.
  view full answer...


• Is Bargman LED, Recessed, Double Tail Light, # 47-84-518 Sold In Pairs
  
• The Bargman LED, Recessed, Double Tail Light, # 47-84-518, is sold in a quantity of 1.
  view full answer...


• How is Double Tail Light, # 47-84-518 Wired to a Trailer
  
• The Double Tail Light, # 47-84-518, has 3 wires. For both lights, there is a black wire for power, which would be connected to the trailer tail light circuit. The green wire behind the right side would be connected to your brake light/turn signal circuit. The combined white wire would be the ground wire for both the red and yellow lights, and would be attached to a suitable grounding point on the trailer frame.
  view full answer...