Ultra-Fab Ultra Scissor Jacks - 30" Lift - 6,500 lbs - Qty 2

Ultra-Fab Products Trailer Jack - UF48-979031

This pair of scissor jacks can be either bolted or welded to the frame of your trailer or RV. Worm-gear mechanisms won't slip. Oversize footplates help to eliminate sinking and tilting.

Features:

• Scissor jacks raise and stabilize 5th-wheel, travel, horse and cargo trailers
• Heavy-duty worm-gear jacking mechanisms prevent slippage
  • Perfect for stabilizing loads
• Large footplates provide excellent stability
• Bolt-on or weld-on installation
  • (2) 3-1/2" x 7-1/4" long mounting plates have multiple holes to fit most applications
  • Mounting hardware not included
• E-Z crank handle included
• Sturdy steel construction
• Black powder coat finish resists corrosion

Specs:

• Quantity: 2 jacks
• Lift: 30"
• Collapsed height: 4-3/4"
• Support capacity per jack: 6,500 lbs
• Footplate dimensions: 5" wide x 9" long
• Lifetime warranty

Note: These jacks are designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of these jacks.

48-979031 UltraFab Scissor Jacks - 30" - 2 Pack

Customers compare UF48-979031 to these similar products

Ultra-Fab Ultra Scissor Jacks - 24" Lift - 6,500 lbs - Qty 2$64.95

Leveling Scissor Jack Set - 24" Lift - 5,000 lbs - QTY 2$65.95

Leveling Scissor Jacks 13,000 lbs (Qty 2)$119.95

Leveling Scissor Jack Set - 30" Lift - 5,000 lbs - QTY 2$98.95

Leveling Scissor Jack - 24" Lift - 5,000 lbs$35.95

Customers Who Purchased This Trailer Jack Also Bought...

Ultra-Fab Speed Socket Power Drill Adapter for Scissor Jacks $7.99

Bonded 4 Wire - per foot $0.57

Americana Trailer Wheel Lug Nut - 13/16" Diameter - Stainless Steel - 1/2" - 20 $1.49

E-Track Tie-Off Ring, 4K $4.59

Loc-Ring for Snap-Loc E-Track Anchor - D-Style - Qty 1 $4.59

Ask the Experts about this Ultra-Fab Products Trailer Jack
Do you have a question about this Trailer Jack?

• Using The Ultra-Fab Ultra Scissor Jacks # UF48-979031 on Uneven Terrain
  
• The 3-1/2 x 7-1/4 inch mounting plates are attached to the top of the Ultra-Fab Ultra Scissor Jacks # UF48-979031, and have multiple mounting holes. I used an existing picture and circled the mounting plate that you referenced. The overall length of the mounting plate is 7-1/4 inches, and the width is 3-1/2 inches. The bottom plate of the jacks will not tilt with the terrain. You will want to make sure that 100 percent of the base of the scissor jack is in contact with the ground and as level
  view full answer...


• How Should Ultra-Fab Ultra Scissor Jacks be Mounted to a Trailer
  
• Since there is no specific hardware kit for the scissor jacks, # UF48-979031, I recommend going with the largest bolts that will fit, grade 5 or higher, if you will be bolting the jacks on. They can also be welded on, which will be the strongest option. Welding should be performed by a qualified professional. There are no specific instructions because each trailer will be different. Of course you will want the end for the handle to point out so you can access it. Other than that there are no
  view full answer...


• Does the Ultra-Fab Ultra Scissor Jacks # UF48-979031 Have a Lift Capacity
  
• The Ultra-Fab Ultra Scissor Jacks, part # UF48-979031, are stabilizer jacks which are designed to be attached to the frame of your trailer or RV and crank down to stabilize a portion of the trailers weight. It has a support weight capacity of 6,500 lbs. This stabilizer jack does not have a lift capacity rating because is not designed to do any lifting of your trailer, plus you do not want to lift or level a trailer or RV because you can cause damage to it. A trailer frame is not intended to c
  view full answer...


• Difference Between Ultra-Fab Scissor Jack Part Numbers UF48-979032 and UF48-979031
  
• The Ultra-Fab Ultra Scissor Jacks # UF48-979031 that you referenced is a quantity of 2 of the Ultra-Fab Ultra Scissor Jack # UF48-979032. So its the same jack, but one part number you get a pair of them and the other part number you get just one.
  view full answer...