Videos are provided As a guide only. Refer To manufacturer
installation instructions And specs For complete information.
With a corrosion-resistant zinc finish, a poly wheel base and a 13" retracted height, this retaining-ring swivel jack is perfect for marine applications. Measures 11" from mounting bracket to top of jack. Inner tube diameter is 1-3/4".
Video of Pro Series Snap-Ring Swivel Marine Jack - Bolt On - Sidewind - 10" Lift - 1,000 lbs
Videos are provided As a guide only. Refer To manufacturer
installation instructions And specs For complete information.
Today were going to take a quick look at the Pro Series Snap-Ring Swivel Marine Jack, part number PSEJ10000101. The entire jack is finished in a zinc coating to help prevent against corrosion. Its a sidewind design with a nice ergonomic handle here on the side that makes operating the jack easy and smooth. Its a bolt-on design with a set of brackets and bolts that come with the jack, so you can bolt it around the frame of your trailer. Its a swivel design where you can pull this pin and rotate the jack on the mounting bracket and that way when youre ready to trailer down the road, you can lift the jack up and you wont run into risk of it hitting the ground. It has a bracket height of 13 inches when retracted.
Thats measured from the bottom of the caster to the center line of our bracket. We have another jack of the same model thats extended all the way out. From the bottom of the caster to the centerline, it measures 23 inches, and thats our extended bracket height. The difference between the two, 10 inches, is our lift. The jack has a capacity of 1,000 pounds and Pro Series covers it with a limited one-year warranty.
The caster itself measures 6 inches in diameter and the jack uses a 2-inch tube. We have 11 inches of height clearance form the top of the jack to the mounting bracket center. Thats it for our quick look at the Pro Series Snap-Ring Swivel Marine Jack, part number PSEJ10000101.
Average Customer Rating: 4.8 out of 5 stars (132 Customer Reviews)With a corrosion-resistant zinc finish, a poly wheel base and a 13" retracted height, this retaining-ring swivel jack is perfect for marine applications. Measures 11" from mounting bracket to top of jack. Inner tube diameter is 1-3/4".
by: Robert R12/10/2013
Easy install to provide greatly improved unhitched trailer handling. This item was the final component to complete a refurbished trailer for my catamaran. My project started with a 1987 Calkins single-axle used trailer, adding the following E Trailer parts: 1. Miro-Flex Trailer Stop/Turn/Tail Light unit 2. CE Smith V-Wing Bolster Brackets 3. Rectangular Trailer Reflectors, Adhesive Mount - Amber 4. Erickson Hide-A-Hook Truck or Trailer Anchors 5. Pro Series Snap-Ring Swivel Marine Jack and completed with a hand-built frame assembly and covered bunk boards. 109785
by: Bob M01/22/2014
Bought this Sidewinder jack for my utility trailer but needed it more for my logsplitter. I'll get another one for the trailer. Couldn't be happier. Unit is well made and the swivel option is ideal for most applications. 114480
Absolutely wonderful product. Works like a charm. Installation and setup is very simple. I needed to replace an old jack for my John Boat trailer. 201142
by: Larry Smith04/05/2015
I purchased the jacks for an unusual project. One of the attachments for my tractor is a backhoe. Getting the backhoe off is not much of a problem. However when working to attach the backhoe to the tractor I have had a very frustrating time. Due to the weight and size of the backhoe it has been difficult to align the tractor to the backhoe. I built a "dolly" to place the backhoe on with three of these jacks attached. Now it is easy to roll the backhoe into position and align by raising and lowering the jacks. I can install the backhoe in less than 10 minutes. These jacks capacity and height adjustment are ideal for this application. Another advantage is I am able to roll the backhoe out of the way giving me more ability to use my storage space efficiently. 183273
by: Shawn K11/06/2015
Does it's job! I have a small trailer and bought this jack to keep my trailer tongue off of the ground where it can sit in standing water and cause the tongue mech. to rust and seize up, it also makes hooking up the trailer easier. I barely lucked out with the swivel clearance, just fit, whew. I couldn't figure out how to best bolt it as I couldn't get the instructed clearance between the bolts and tongue due to my smaller trailer and lack of hole options. I ended up with a rather large gap between the bolts and the tongue so I just rested the tongue on the bottom bolts and cranked the heck out of the bolts to get a good clamp lock. It's a very small trailer with 600lb load cap so I'm not concerned about this jack. 231517
The product was as described. There was a problem with the lower section not being firmly attached to the top. When I attempted to crank the unit either up or down there was no response. When I lifted the unit the bottom fell out. It was not attached to the top. I took the unit apart as far as I could and found the bottom was not coupled. I put the unit (top) in a large vise and applied a lot of pressure on the bottom unit as I rotated it. Finally I smacked it with a large hammer and it snapped into place. It works fine now but I am concerned that the bottom may detach again. I feel the unit is made of high quality materials and is a great design except for the way the bottom unit attaches to the top. 125412
This jack was designed for a rectangular tongue application but I have mounted it on a round tongue by welding the bottoms of two muffler clamps to the tongue. The indent on the swivel plate fits the tube nicely so all I had to do was bolt the jack on. It tucks away nicely on the tongue during transport. My particular application involves a very lightweight trailer (about 300lbs. dry) and the jack is rated at 1,000 so by welding the bottoms of those muffler clamps to the tongue I have a solid foundation for my application. This particular jack works well for me because I'm re-building this trailer for uses a camper , now I can easily move it around as I work on it. 145415
by: Jim S05/28/2014
I called e trailer ready to order a much more expensive product. It was suggested that this product would suite my needs and be notably less expensive. I installed the product in less than 15 minutes (including reading the directions...). With this wheel on the tongue of my tow dolly, my wife can move it easily by herself. The construction of the product seems more than I need for this application. I am impressed with the product and e trailer. 133029
Everything went smooth , bolted right on , looks great . 82678
by: Tony D10/16/2014
This trailer jack is perfect for my aluminum trailer--exactly what was advertised and what I needed. The icing on the cake was the great customer service I got from the folks at etrailer--specifically Patrick B. From ensuring I had the correct order to following up on my satisfaction with the product, Patrick epitomized excellent customer service, and is one of the reasons why I give etrailer such high marks for both product and customer service. They have my highest endorsement! Thanks--Tony 156263
by: Mark B.12/16/2012
Solid construction -- great quality for the price. Operation is easy, handle turns smoothly to raise or lower your trailer tongue. Swiveling the jack into the horizontal "stowed" position is very easy, too: just pull out the spring-loaded pin, swivel to horizontal, and the pin will snap into place again. My only complaint was that the nuts & bolts seemed odd sized, and directions did not tell you which sizes you need. This is really going to save my back! 61587
I chose the coldest day of the year to install this thing. I got it done quick and easy. It's not my first one installing so I already knew what to expect. The item was on back order but about 2hrs after I placed my Order I got a call alerting me to the delay I might expect. I was in no rush so it all worked out fine. Great sales department. Highly reccomended this company for all trailer parts. 235727
by: Rick H03/11/2011
Prompt delivery, easy to install and fits perfectly. This jack has increased my efficiency for home landscape projects. I no longer need to use the jeep to haul the trailer and then go get the tractor to load materials. I pull the trailer to my work area with my tractor, detached the trailer and load the trailer using the tractor bucket and then reattach the trailer to transport my materials. 9072
by: Mike W.06/16/2014
Installed this on a jet ski trailer after I got tired of lifting the tongue off the ground too many times. Seems to have some play in the swivel part, so the jack leg leans at a slight angle. Tongue weight is less than 200#s so I'm not worried, but I wouldn't use this on a big trailer anywhere's near it's rated capacity. Good value for the price. Happy with it so far, just installed it. 135698
by: Biloxi Bob06/03/2016
I mounted this on my new boat trailer and it's made the job of moving the rig around the driveway so simple and easy on my back while I get the new jon boat outfitted with fishing stuff. 256218
Great product I needed this for the for the tongue and hitch I put on for the log splitter so I wouldn't have to bend over to pick it up and to be able to move it around the garage 176392
I have not used this off pavement but on pavement, within it's load limitations of 1000# this is a nicely sturdy and well built jack. It has a zerk fitting for grease and rolls well. It is all that I need for any load that I will be carrying on my 2000# gross utility trailer (500# max tongue weight) and I see no reason why it won't last as long as the trailer. 146654
would have liked it better if the jack assembly had a groove in the inside tube and matching dimple in the outside tube to keep the inside tube with the wheel from spinning. like the Pro Series Trailer Jack - PSRV20000103 has. you have to hold the wheel assembly ( the inner tube) to get it to go up or down once the load is off the PSEJ10000101 jack, 135650
by: Mark G08/31/2011
This was my second order from etrailer. I recommend them to anyone looking for anything trailer or cargo related. The jack is for a fishing boat and I haven't had a chance to install it but it seems like a wellbuilt product that will more than cover my needs. A+ to etrailer.com as they are awesome with service and prompt shipment! 23275
by: Scott B.04/13/2012
Nice trailer jack for the money, especially if you're going to be ordering other items and get the free shipping deal. This is actually a Fulton product. Says so right on the box. Three years ago, I installed a jack identical to this one on another trailer I own, and it still performs flawlessly. Recommended. 37055
This is the second one of these that I've bought and used. The first is on a 5X8 utility trailer and this one is for my 14" jon boat trailer. Easy install and heavy weight construction. Does what it's supposed to do and with a squirt of grease in the fitting every now and then it should last a long long time. 182934
by: John H.11/13/2012
Bought a boat trailer with jack missing and only the welded plate remained. Researching on etrailer with good photos and technical dimensions I was able to find the correct replacement jack. Twenty minutes after the product arrived I had the new jack mounted on my trailer. 59381
by: Doug T.09/04/2013
The Pro Series Snap-Ring Swivel Marine Jack is a great product and fit my application perfectly.... the install was easy and the results are spectacular. This jack is the finishing touch to a complete restoration of a 1959 boat trailer and it looks great bolted in place! 98200
by: Dustin H.06/09/2014
It was just what I hoped it would be. Patrick at etrailer.com upgraded my shipping so it got here fast. And as I wanted, the swivel mounted to my existing mount. So no bolts needed. Works perfect, nice and smooth. The big wheel makes moving the boat around a lot easier. 134831
by: Tom M08/17/2016
I've had this jack on my teardrop camper for a year and it's holding up strong through blacktop, gravel, and turf. Plenty of lift range for all the un-level campsites in Pennsylvania, and saves my back when hitching up and unhooking. I'm 100% happy with this purchase. 284842
by: Phil Markert11/08/2012
The trailer jack arrived, is installed, and it works. MORE IMPOTANTLY- the process of ordering, tracking delivery, and delivery was first rate. I ordered four commodity items- like the jack from you- and your process and execution stand out. thanks 58988
Works ok if going straight but difficult to turn the direction you want it to go when on dirt or grass to line it up to the hitch. I wish it had a way of turning the wheel in the direstion you want it to go like a handle etc Still a good buy. 265054
by: Chuck B.09/13/2013
The product seems fine. It is a replacement for a very similar jack. This one has a grease fitting that the old one did not have and a better crank. It is the same size exactly as the former jack. It was made about 5 miles from my home. 99816
by: Greg B.09/10/2016
Arrived on-time as expected. Easy assembly and high quality. Works well on my utility trailer with low ground clearance since the original jack was stationary and would bottom out on occasion. Problem has been solved with this new jack. 293172
by: Flint m07/25/2014
All parts were included - none missing / thank goodness Took some time to match sized wrenches to the task / once done, assembly proceeded smoothly with litle time required. Product is well constructed - will see how it weathers. 142917
by: Barb K.06/26/2015
Excellent addition to my Malone MicroSport modified trailer which I use to haul my Hobie PA17. Saves my back now that I don't have to lift the front end of the trailer to drop it onto the ball. Easy to install - feels very sturdy. 207549
by: Mark J.07/10/2016
Great product and was a good match for my 14' galvanized boat trailer. I have ordered from etrailer numerous times before and have never been disappointed. I highly recommend etrailer for anyone who needs trailer accessories. 270154
by: Roger D.02/24/2016
I needed to change out the OEM jack on my motorcycle trailer and checked many local and on line suppliers. etrailer.com had the best price and reviews. This jack exceeded my expectations and the shipping was very fast too. 238586
by: Roy Earl Newton04/17/2016
OK on my boat. 245736
by: Dave K.02/27/2012
The service at etrailer was first rate as was the quality of the trailer jack. I just installed it on my sailboat trailer and it is perfect! I already suggested etrailer to a friend who helped me install my jack. 32639
by: Joe M06/02/2014
I was pleasantly surprised at the build quality. It's working out great. My order was delivered quickly and it was easy to install and works perfectly. etrailer couldn't be easier to deal with!! 133838
by: Steve M04/26/2015
Product was everything I expected it to be. Installation was under an hour and the directions clear. Thanks to the folks at e-trailer.com this went very smoothly. Highly recommend this. 188317
by: William W.08/06/2016
Quick shipping as was the entire order. Upon ordering, I was concerned this jack would be under built for my 18ft aluminum boat. My worries were for nothing. Great jack for the money. 280649
I started using etrailer a couple years ago. Fast service good prices and quality products. Rims tires lights and a trailer jack all exactly as described Will use etrailer again 200860
by: Robert E.Lathe08/05/2016
vey easy to install, I had one like it on 1 of my trailers, but top crank . it got full of water,froze and busted up the inside. I now have 2of these jacks on my trailers, I love um 280075
by: Leon Juday08/22/2015
I received the shipment when you said I would. It was complete with all parts and instructions, and took about an hour to assemble and install. I am completely happy with it. 221014
by: Kari S08/09/2012
Item was super easy to attach. Communication from the company was excellent and product arrived super fast. The quality of the product is high and I look forward to using it! 51087
by: Richard V06/06/2016
Thanks Etrailer for the upgraded shipping at no extra charge, product was received early and with no damage I plan on using your company in the future. Great experience. 258033
by: Kevin H05/30/2016
The swivel jack worked perfectly on our trailer. I especially like the fact that the jack swivels. Our old Jack didn't have that capability & it's very nice to have. 253860
by: Ken J.09/19/2014
Product looks good. Have not installed yet. Order process and shipping was fast and easy - exactly what you expect from an online experience. Good job, eTrailer. 152105
by: Rob R.06/04/2012
Added this to the Time-out camper trailer. We were tired of pulling it by the safety chains. Big improvement. Fast shipping and great prices from etrailer.com 42645
Product appears to be of excellent quality, though I have not yet installed it (due to recent injury). Looking forward to saving my back with this product. 166283
by: Ryan T.11/20/2013
just put the jack on tonight, seems a nice product. definitely looks/feels strong enough to lift my entire trailer, let alone just the tongue. 107982
by: Joseph H.09/02/2015
Used this to replace a 3K jack and for me it works just as well. I had my concerns with the change, but very happy with it's performance. 223509
Product shipped promply and fit perfectly. Seems sturdy and well made. I appreciate the grease fitting. I would recommend to anyone. 55798
Ask the Experts about this Pro Series Trailer Jack
Do you have a question about this Trailer Jack?
At etrailer.com we guarantee:
Highest quality trailer jack for the best price.
Real product know-how.
Most detailed, accurate trailer jack information available.
Information for this part was:
Installations, made easy.
Personalized service for life.
Trusted since 1946.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.