Pro Series Square Jack - Drop Leg w/ Non-Spring Return - Sidewind - 12-1/2" Lift - 12,000 lbs

Video Transcript for Pro Series Trailer Jack PS1400990376 Review

Today were going to review part number ps1400990376. This is the Pro Series Square Jack, the side-wide handle, and the non-spring return drop leg. This heavy duty weld-on square drop leg jack has a front facing plunger pin. It is perfect for agricultural, construction, livestock, or heavy duty utility applications. Now the side-wide crank is sold separately. This jack is of sturdy steel construction and provides a heavy-duty durability.

Has a gray paint finish and the outer tubes which are weather resistant. It does have a drop leg with a non-spring return. That will increase the overall extensive for maximum adjustability. Again the plunger pin right here is positioned to the front. This is a direct weld design and it does have an integrated foot plate with the handles on both sides.

Basically to get the drop leg to come out youll just pull the plunger pin out, lock it into place. Thatll allow the drop leg to come down and therell be adjustment holes whenever you find the correct height you want just release the plunger pin that would go into the hole and keep it into that position. Then when you are ready to raise it up again you would just pull out the plunger pin, put it into the lock position, and then you can raise the drop leg up. I do want to give you some measurements on this. This jack right here is in the fully retracted position.

The total height on this would be 28 and a quarter inches in the fully retracted position. This jack back here to save time I pulled the same jack and fully extended it. The measurement in the fully extended position will be 40 and three-quarters of an inch. That would give you a total lift on this jack of 12 and a half inches. Now the drop leg when it is dropped down it does have a travel of 13 and a half inches total length.

This jack does have a static weight capacity of 12,000 pounds and a lift weight capacity of 10,000 pounds. It does come with limited one year warranty. Basically just to show you how the side-wide crank would work. When you turn it in the clockwise position that would raise it, counter-clockwise would lower it. Again the side-wide crank is sold separately. If youd go to the product page of this jack on the right hand side will be a related products and it would list the correct side-wide crank you would need. That should do it for a review on part number ps1400990376.