Pro Series Snap-Ring Swivel Marine Jack - Bolt On - Sidewind - 10" Lift - 1,000 lbs

Pro Series Trailer Jack - PSEJ10000101

With a corrosion-resistant zinc finish; a durable, poly wheel base; and a 13" retracted height, this retaining-ring swivel jack is perfect for marine and other recreational applications. Measures 11" from mounting bracket to top of jack.

Features:

• Ideal for marine and recreational use
• Convenient, spring-loaded, plunger-pin swivel feature
  • Swing up to stow parallel to tongue for travel
  • Move back into upright position for use
• Corrosion-resistant zinc finish
• Heavy-gauge steel construction
• Sidewind design
• Thermoplastic wheel and bolt-on mounting bracket included
  • Bolt-on mount fits up to 3" x 5" trailer tongue

Specs:

• Bracket height:
  • 13" Retracted
  • 23" Extended
• Lift: 10"
• Clearance: 11" from mounting bracket to top of jack
• Tubing diameter: 2"
• Wheel diameter: 6"
• Lift capacity: 1,000 lbs
• Limited 1-year warranty

EJ10000101 Pro Series Round Retaining Ring Swivel Jack - Sidewind - Bolt On - 1,000 lbs

Video of Pro Series Snap-Ring Swivel Marine Jack - Bolt On - Sidewind - 10" Lift - 1,000 lbs

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Pro Series Trailer Jack PSEJ10000101 Review

Customers compare PSEJ10000101 to these similar products

Fulton Round, Snap-Ring Swivel Marine Jack - Bolt On - Sidewind - 10" Lift - 1,200 lbs$41.95

Fulton Round, Snap-Ring Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs$39.95

Trailer Jack, Sidewind Swivel Jack with 6" Wheel - 1200 lbs. by Dutton-Lainson$36.95

Fulton Bolt-Thru Swivel Marine Jack w/ Caster - Sidewind - 10" Lift - 1,200 lbs$64.95

Pro Series Round, Snap-Ring Swivel Jack - Bolt On - Topwind - 10" Lift - 2,000 lbs$31.95

Customers Who Purchased This Trailer Jack Also Bought...

Bonded 4 Wire - per foot $0.57

Trailer Wheel Lug Nut - 1/2"(Each) $0.58

Jacketed 2 Wire, 10 Gauge, Brake Wire - per Foot $1.21

Replacement Clip for Rapid Hitch 4-1/4" x 5/8" Non-Locking Adjustment Pin $0.85

Primary Wire - 16-Gauge - Black - per Foot $0.13

Ask the Experts about this Pro Series Trailer Jack
Do you have a question about this Trailer Jack?

• Will Pro Series Snap-Ring Swivel Marine Jack, # PSEJ10000101, Fit a 3 x 3 Inch Square Trailer Frame
  
• The Pro Series Snap-Ring Swivel Marine Jack, # PSEJ10000101, will fit trailer frames up to 3 by 5 inches, so it will fit on your trailer. You will need to use 1/2 inch bolts. I recommend grade 8 bolts for this application.
  view full answer...


• Fully Retracted Length of Pro Series 1000 lb Capacity Jack Part # PSEJ10000101
  
• The Pro Series snap ring jack part # PSEJ10000101 measures 24-1/2 inches from the bottom of the wheel to the top of the jack when fully retracted.
  view full answer...


• What to Consider When Choosing a Replacement Trailer Jack for a Triton Boat Trailer
  
• The first thing I would consider when replacing a trailer jack is the capacity needed. The Pro Series Snap-Ring Swivel Marine Jack, # PSEJ10000101, has a capacity of 1,000 pounds. We carry similar jacks with a capacity of 800 pounds on up to 1,600 pounds. Next you will need to determine if you want a bolt on or weld on. The jack you have referenced is a bolt on. If you choose a weld on jack, I recommend having it installed and welded by a qualified professional welder. If you choose a bolt on
  view full answer...


• What Is The Diameter Of Snap Ring And Circular Opening On Pro Series Trailer Jack, # PSEJ10000101
  
• On the Pro Series Trailer Jack, # PSEJ10000101, the outside diameter of the snap ring is 2-1/2 inches, which is also the diameter of the circular opening that attaches the jack to the mount. The inside diameter of the snap ring is 2.28 inches. The Fulton Replacement Retaining Ring, # FP908600, is the snap ring that would work on the Pro Series Trailer Jack, # PSEJ10000101.
  view full answer...


• Distance from Bottom of Mounting Plate to Bottom of Wheel on the Pro Series Snap-Ring Swivel Jack
  
• The distance from the bottom of the mounting plate to the bottom of the wheel on the Pro Series Snap-Ring Swivel Marine Jack - Bolt On - Sidewind - 10 inch Lift - 1,000 lbs, item # PSEJ10000101, is 10 inches.
  view full answer...


• Need A Jack Handle For Pro Series Swivel Marine Jack - Sidewind - 1,000 lbs. # PSEJ10000101
  
• I called the manufacturer (Cequent) about a replacement handle for the Pro Series Snap-Ring Swivel Marine Jack - Sidewind - 1,000 lbs. # PSEJ10000101. They said it is the Replacement Sidewind Handle Kit For 1,500 lbs. Jacks # F0933305S00. They said the Fulton 1,500 lb. sidewind jack and Pro Series 1,000 lb. sidewind jack use the same handle kit. The handle kit includes the crank, pin, and bushing.
  view full answer...


• Recommend A Bolt-Thru Fulton 1200 lb Trailer Jack
  
• I contacted our representative at Fulton. He informed me that the model jack you have referenced, may be the TJ507, as they do not have a record for the TJ5010101 jack. He informed me that the newer model jacks will not fit the older jack mounts. The reason this is, is that a few years back they redesigned the mounts as to make them fit better and rattle less. For you to install a new jack you would need to install a jack and use the mounting system the new jack uses, which many of the jacks
  view full answer...


• How to Install a Bolt-On Swivel Trailer Jack to an L-Shaped Trailer Frame
  
• In order to bolt the Pro Series Snap-Ring Swivel Marine Jack, # PSEJ10000101, to an L-shaped trailer frame, I recommend having some steel plates welded to the trailer frame in order to make it a box frame in the location where you want to install the jack. This will provide the support the jack needs to be properly installed. Any welding should be done by a qualified professional welder. Another option would be to use a Pro Series Round, Pipe-Mount Swivel Jack, # PS1401060303. This is a pipe
  view full answer...


• What is the Outer Tube Diameter and Inner Tube Diameter of a Pro Series 1,000 Pound Trailer Jack
  
• I went out to the warehouse to measure a Pro Series Snap Ring Swivel Jack, # PSEJ10000101, for you. The outer tube diameter is actually 2 inches. The inner tube diameter is 1-3/4 inches.
  view full answer...


• Will Pro Series Trailer Jack Part # PSEJ10000101 fit a 3 Inch Trailer Tongue
  
• The Pro Series Snap-Ring Swivel Jack you referenced, part # PSEJ10000101 will fit your 3 by 3 inch trailer tongue.
  view full answer...


• Mounting plate Dimensions for the Pro Series Jack # PSEJ10000101 to Mount on a LAK Sailplane Trailer
  
• I went out to the warehouse and pulled one of the Pro Series Snap-Ring Swivel Jacks, # PSEJ10000101, to measure for you. I added dimensions to a photo I took of the mounting plate for you to use to see if the mounting pattern will match up to your mounting plate on your LAK sailplane trailer model T-5. The overall dimensions of the mounting plate are 6-3/8 inches by 5-1/2 inches, and the bolt hole pattern is 4-3/8 inches on center for the outer most holes, 3-3/8 inches on center for the inner
  view full answer...


• Retracting an Over Extended Shelby Trailer Jack
  
• What you can try to do is manually spin the inner tube of the jack to get it to free back up. Then, lower or retract the jack after it has caught the gears again. The inner tube may be spinning freely as it is maxed out and the gears are not grabbing. If the above suggestion does not work, you may have to take the jack apart partially to retract the jack. You will want to also make sure that the jack does not begin to cross-thread after it is being retracted which will damage the jack. Th
  view full answer...


• Trailer Jack Recommendation for a Car Dolly with 18 Inches of Clearance from Ground to Frame
  
• The bolt-on swivel jack # PSEJ10000101, has a retracted height of 13 inches from the bottom of the wheel to the mounting bracket so it should work well for you. this jack is designed to fit 3 x 5 inch frames. A jack with even more clearance would be the Bulldog rack and gear jack, # BD169201. This jack measures only 7-1/2 inches from the bottom of the wheel to the mounting bracket when retracted. It does have a lower capacity at 750 pounds. It fits on frames up to 3 x 5 inches.
  view full answer...


• Swivel Trailer Jack with a Wheel For a Motorcycle Trailer
  
• The 10 inches you see on trailer jack # PSEJ10000101 is the amount of lift it has, not the distance from the bracket to the wheel. The retracted height of this jack is actually 13 inches. The frame dimensions are going to be too small for a bolt on jack so I recommend a weld-on jack like # FTJ120W0301. This jack has the same retracted height and it has a 1,200 pound capacity. Welding should be done by a qualified professional. I have included a link to a video review of this jack for you.
  view full answer...


• Replacement Handle or Handle Grip for a Fulton Pro Series PSEJ10000101 Trailer Jack
  
• I spoke with my contact at Fulton and Pro Series and got some information for you. A lot depends on the age of the jack. If the handle is held in place by an e-clip and not a pin then there are no replacement parts available. If the handle is held in with a pin in the top gear then you would need to replace the entire handle assembly using # F0933301S00 which is a different handle design but would fit. The black handle grip on your jack is not available as a separate part.
  view full answer...