Trailer Jack > A-Frame Jack > Topwind Jack > Bolt-On, Weld-On > 15 Inch Lift > No Wheel or Foot > 2000 lbs > Pro Series

Pro Series Round, A-Frame Jack - Topwind - 15" Lift - 2,000 lbs

Rating: rating rating rating rating rating
34 reviews

Code: PS1401000303

Retail:$27.43

Price:$22.95

Shipping Weight: 11 pounds

Shipping Special

Orders of $150 qualify for free shipping.
Lowest Price Pledge

Quantity:

Pro Series Trailer Jack PS1401000303 Review - Video

Pro Series Trailer Jack - PS1401000303

Ideal for multiple agricultural and commercial applications, this standard A-frame jack features a 5-1/2" retracted height and measures 16" from the mounting bracket to the top, excluding the handle. Base sold separately.

Features:

Utility jack is perfect for agricultural and commercial applications
Precision-fit parts provide exceptional stability and reliability
Weld-on/bolt-on bracket mounts to any standard A-frame coupler
Outer and inner tubes have black paint finish
Topwind handle has smooth, ergonomic design for easy cranking
Footplate or caster assembly sold separately

Specs:

Bracket height:
- 5-1/2" Retracted
- 20-1/2" Extended
Lift: 15"
Clearance: 16" from mounting bracket to top of jack
Inner tubing diameter: 2"
Outer tubing diameter: 2-1/4"
Lift capacity: 2,000 lbs
Limited 1-year warranty

1401000303 Pro Series Round A-Frame Jack - Topwind - 15" Travel - 2,000 lbs

Video of Pro Series Round, A-Frame Jack - Topwind - 15" Lift - 2,000 lbs

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video Demo Pro Series Trailer Jack PS1401000303

Pro Series Trailer Jack PS1401000303 Review

Video Transcript for Pro Series Trailer Jack PS1401000303 Review

Today, were going to review part number PS1401000303. This is the Pro Series Round, A-Frame Topwind Jack. This has a lift capacity of 2,000 pounds. This standard A-Frame Jack would make a good utility jack which is perfect for agricultural and commercial applications. It does use precision-fit parts which will provide exceptional stability and reliability. It does have a triangular-mounting bracket right here, which was made to fit any standard A-Frame trailer.

It can be welded on or using the three elongated holes, it can also be bolted on. Now, the distance between these holes from the center to the center of each hole is 3 inches and that is the industry standard. So, normally if a trailer has an A-Frame jack with the three holes in it, they should be at the 3-inch industry standard. The outer and the inner tubes have a black paint finish. The topwind handle which is right here at the top of the jack has a smooth ergonomic design for easy cranking.

This jack does not come with any base assembly. That is sold separately. You would have a choice of a footplate or a wheel caster assembly. I do want to give you a few dimensions on this. The clearance which is the measurement from the mounting bracket to the top of the jack on this one would be 16 inches.

Now, this jack is in the fully retracted position, so the measurement from the bottom of the tube to the mounting bracket in the fully retracted position would be 5-1/2 inches. Now, if we crank that all the way out -- to save time I have one here already extended out. This jack is in the fully extended position, so that measurement would be 20-1/2 inches. Basically, this jack would have a lift of 15 inches which is basically the retracted dimension of 5-1/2 subtracted from the extended dimension of 20-1/2 to give you a lift of 15. The inner tubing, this part right here, is a 2-inch diameter tubing.

The outer tubing is 2-1/4 inch diameter, and again this has a lift capacity of 2,000 pounds. It has a limited one-year warranty. I just wanted to give you an example of a few of the base assemblies that you can purchase separately that would work on this. The first one is a footplate, which would be part number PS1400700340. Basically, you take the pin and clip out and align the holes in the inner tube with the holes in the footplate. You go ahead and run the pin through, lock it on with the clip and you would have a footplate on this jack. Now, the other base you could put on this, if you want to make it a mobile base, would be a wheel caster assembly, which is this part right here, again, sold separately would be PS1400750340. It attaches the same way. You remove the pin and clip, align the holes with the holes in the inner tube, put the pin through, put the safety clip on and now you would have a jack with a wheel caster assembly on the bottom of it. Again, that should do it for the review on part number PS1401000303.

Customers compare PS1401000303 to these similar products