Trailer Jack > Drop Leg Jack > Sidewind Jack > Weld-On > 12-1/2 Inch Lift > With Foot > 13-1/2 Inch Drop Leg > 12000 lbs > Pro Series

Pro Series Square Jack - Drop Leg w/ Spring Return - Sidewind - 12-1/2" Lift - 12,000 lbs

Rating: rating rating rating rating rating
17 reviews

Code: PS1400950376

Retail:$155.53

Price:$119.95

Shipping Weight: 62 pounds

Shipping Special

Orders of $150 qualify for free shipping.
Lowest Price Pledge

Quantity:

Pro Series Trailer Jack PS1400950376 Review - Video

Pro Series Trailer Jack - PS1400950376

Heavy-duty, weld-on, square, drop-leg jack includes a sidewind crank and has a front-facing plunger pin and a 28-1/4" retracted height. Perfect for agricultural, construction, livestock or heavy-duty utility applications.

Features:

Sturdy steel construction provides heavy-duty durability
Weather-resistant inner and outer tubes have gray paint finish
Drop leg with spring return increases overall extension for maximum adjustability
- Plunger pin positioned to the front
Direct-weld design
Sidewind crank included
Integrated footplate

Note: If used as a dual jack, must be used with another Pro Series jack

Specs:

Bracket height:
- 28-1/4" Retracted
- 54-1/4" Extended
Drop-leg travel: 13-1/2"
Lift: 12-1/2"
Lift capacity: 10,000 lbs
Static capacity: 12,000 lbs
Limited 1-year warranty

1400950376 Pro Series Heavy Duty Square Direct Weld Jack with Spring Return Drop Leg - Sidewind - 12-1/2" Travel - 12,000 lbs

1400950376 Eclipse Square Direct Weld Jack with Drop Leg, Sidewind, 26" Travel, 12,000 lbs

Video of Pro Series Square Jack - Drop Leg w/ Spring Return - Sidewind - 12-1/2" Lift - 12,000 lbs

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video Demo Pro Series Trailer Jack PS1400950376

Pro Series Trailer Jack PS1400950376 Review

Video Transcript for Pro Series Trailer Jack PS1400950376 Review

Today were going to review part number PS1400950376. This is the Pro Series side winding square jack with a 12,000 pound weight capacity. This jack is a heavy duty weld on square drop leg jack which will include the side winding crank and it has the front facing plunger pin. This is perfect for agricultural construction, livestock or heavy duty utility application. Its made of a sturdy steel construction which will provide heavy duty durability. It is weather resistant.

It has the grey finish on the inner and the outer tubes to protect it from the weather. The drop leg on this jack has a spring return which will increase your overall extension for maximum adjustability. Basically if you pull this plunger pin out and turn it to lock in the side here you could pull your drop leg down. Theres a couple of different holes on the side, let me show you. You can see one right there.

Theres a few that go all the way up there. You just pick the right selection youd want and then pull your plunger pin out, let it go into the hole for the correct height and then when you need to retract it if you just pull it and set it there it will automatically return to its retracted position. This jack is a direct weld-on design. Again, the side-wind crank is included and the weld-on bracket that holds the handle. The total static weight capacity on this jack is 12,000 pounds.

The lift capacity is 10,000 pounds. The measurements on this, if you crank in a clockwise position it will extend the jack out. If you go in the counterclockwise position the jack will retract. With this jack in the fully retracted position with the drop leg fully retracted would be 28 inches height. In the fully extended position with the jack fully extended out and the drop leg fully extended out would be a total of 54 inches.

The drop leg travel amount is 13 inches. The amount of lift when you crank this jack total would be 12 inches. That would give you your total travel of 26 inches. This jack does come with a limited one year warranty. That should do it for review on part number PS1400950376.

Customers compare PS1400950376 to these similar products