Fulton F2 Swing-Up, Wide-Track Trailer Jack, 8" Single Wheel, Sidewind, Bolt-On - 1,600 lbs

Fulton Trailer Jack - F1413040134

Maintenance-free, corrosion-resistant jack is made for marine, recreational and utility trailers. Features aluminum alloy construction, adjustable mount and swivel system and wide-track wheels for superior stability.

Features:

• Adjustable mount and swivel system for easy lifting and transport
  • Can be adjusted to any height for mounting
  • Swivels into position simply with the integrated, easy-to-grip pull pin
• Maintenance-free construction
  • Sealed and lubricated, one-piece gearbox eliminates the need for manual lubrication
  • Anodized finish on inner and outer aluminum alloy tubes prevents rust even in the harshest environment
• Wide wheel base allows for increased stability
• Sidewind handle is made of strong plastic for durability and ease of use
• Bolt-on installation
• Includes wheel stop

Specs:

• Application: fits 3" x 3" and 3" x 4" tongues
• Lift height: 10"
• Bracket range of adjustability: 8"
• Wheel diameter: 8"
• Wheel width: 3"
• Pull pin diameter: 9/16"
• Overall height: retracted 25"
• Overall height: extended 35"
• Capacity: 1,600 lbs
• Lifetime limited warranty

1413040134 Fulton F2 Marine and Recreational Jack for 3" x 3" and 3" x 4" Frames, Sidewind, Wide Track, 1,600 lbs

Customers compare F1413040134 to these similar products

Fulton F2 Swing-Up Trailer Jack, Dual 7" Wheels, Sidewind, Bolt-On - 1,600 lbs$154.95

Fulton F2 Swing-Up Trailer Jack, Dual 7" Wheels, Sidewind, Weld-On - 1,600 lbs$144.95

Fulton F2 Swing-Up Trailer Jack for 4 - 5 Frames - 8" Wide-Track Wheel - Bolt On - 1,600 lbs$142.95

Fulton Round, Snap-Ring Swivel Marine Jack - Bolt On - Sidewind - 10" Lift - 1,200 lbs$41.95

Pull Pin, Easy Swivel Trailer Jack with 8" Wheel - Sidewind - 1,500 lbs. by Dutton-Lainson$81.95

Customers Who Purchased This Trailer Jack Also Bought...

Rubber Grommet for 6-1/2" Oval Trailer Tail Lights $0.95

Trailer Coupler Safety Lock Pin - 1/4" $2.75

Replacement Lift Cylinder for UWS Toolboxes $15.95

Replacement Locking Paddle Handle for UWS Toolboxes $24.95

Trailer D-Ring Tie Down, Recessed 5K $7.99

Replacement parts available for this product

Wide-Track Wheel Assembly for Fulton F2 Adjustable A-Frame Jack - 8" Diameter - 1,600 lbs $53.95

Fulton Wheel Wedge Kit for F2 Swing-Up, Wide-Track Jacks $19.95

Customer Reviews

Fulton F2 Swing-Up, Wide-Track Trailer Jack, 8 - F1413040134

Average Customer Rating:  4.9 out of 5 stars   (12 Customer Reviews)

- F1413040134

by: Jake C05/23/2012

Is this review helpful?

Overall this is an excellent Jack. Overkill for my small Rack n Roll Kayak Trailer. Box had a huge gash in it but contents were fine. Instructions were very detailed. I am a little disappointed that the Jack did not have a handle keeper on the main tube for some reason. Had to trim the U-bolts because the tube on the Kayak trailer is only 2"x2", but no big deal. Overall this jack is killer. I attached 4 photos of the install.41483

comment on this review

Ask your question or add a comment to this product review?

Name: (example: John S.)

Contact email:

* please make sure your email address is correct (should look like name@domain.com)

Comment

Yes, I would like an email notification if someone replies to my comment?   

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

- F1413040134

by: Rick P.05/03/2011

Is this review helpful?

After installing this jack on my boat trailer to replace the one that came with the rig, it is like night and day difference when I need to move my trailer alone. I could not be happier with the product and its functionality! Very well constructed product. The service and added benefit of the price pledge provided by etrailer is awesome! Thanks again.12757

comment on this review

Ask your question or add a comment to this product review?

Name: (example: John S.)

Contact email:

* please make sure your email address is correct (should look like name@domain.com)

Comment

Yes, I would like an email notification if someone replies to my comment?   

- F1413040134

by: Joseph P04/12/2013

Is this review helpful?

This is a high quality well built wheel jack. Installs easily, rolls around my gravel driveway like I hoped. Plus these e trailer guys r great!75557

comment on this review

Ask your question or add a comment to this product review?

Name: (example: John S.)

Contact email:

* please make sure your email address is correct (should look like name@domain.com)

Comment

Yes, I would like an email notification if someone replies to my comment?   

- F1413040134

by: Tim S08/19/2012

Is this review helpful?

Easy ordering, FAST shipping, everything was as I expected. I will order from them again.52290

comment on this review

Ask your question or add a comment to this product review?

Name: (example: John S.)

Contact email:

* please make sure your email address is correct (should look like name@domain.com)

Comment

Yes, I would like an email notification if someone replies to my comment?   

- F1413040134

by: Darrell B.07/24/2012

Is this review helpful?

The new Fulton F2 jack was a very easy install. Works exceptionally well.49135

comment on this review

Ask your question or add a comment to this product review?

Name: (example: John S.)

Contact email:

* please make sure your email address is correct (should look like name@domain.com)

Comment

Yes, I would like an email notification if someone replies to my comment?   

Click to Enlarge

Click to Enlarge

- F1413040134

by: Dave S06/03/2012

Is this review helpful?

Bought for Triton Lite snowmobile trailer. Works as advertised. Etrailer service and prices excellent 42524

comment on this review

Ask your question or add a comment to this product review?

Name: (example: John S.)

Contact email:

* please make sure your email address is correct (should look like name@domain.com)

Comment

Yes, I would like an email notification if someone replies to my comment?   

- F1413040134

by: Ryan05/28/2012

Is this review helpful?

Excellent service, great product, and quick delivery. Took some independent research to find the correct product for my particular application but I was attempting to retrofit this product onto a previous single bolt trailer jack. Took a call to Fulton as well, but very happy with the end result.41845

comment on this review

Ask your question or add a comment to this product review?

Name: (example: John S.)

Contact email:

* please make sure your email address is correct (should look like name@domain.com)

Comment

Yes, I would like an email notification if someone replies to my comment?   

- F1413040134

by: David S.04/11/2012

Is this review helpful?

Best jack made. Have single wheel and double wheel model. Also easy for my elderly father to operate. Shipped an hour after ordered and received in a couple days. E-trailer is by far the best online company I do business with! 36873

comment on this review

Ask your question or add a comment to this product review?

Name: (example: John S.)

Contact email:

* please make sure your email address is correct (should look like name@domain.com)

Comment

Yes, I would like an email notification if someone replies to my comment?   

- F1413040134

by: pvd04/09/2012

Is this review helpful?

wheel is 3wide 8 high,better than I thought it would excellent product36639

comment on this review

Ask your question or add a comment to this product review?

Name: (example: John S.)

Contact email:

* please make sure your email address is correct (should look like name@domain.com)

Comment

Yes, I would like an email notification if someone replies to my comment?   

- F1413040134

by: Mike P03/22/2012

Is this review helpful?

Ordered two jacks and they arrived quickly and were packaged well in a box that even had handles making it easier to carry. We needed a quality jack that had adjustability to allow our air compressors to be towed behind various trucks with a wide range of hitch mounting heights. This jack allowed that adjustment so now the jack fits all truck heights. This appears to be a quality made piece but, we just mounted them and have not really had a chance to use them yet. Mounting was easy even though we did not use the included U-bolts. We simply fabricated mounting brackets and either bolted or welded them on.34721

comment on this review

Ask your question or add a comment to this product review?

Name: (example: John S.)

Contact email:

* please make sure your email address is correct (should look like name@domain.com)

Comment

Yes, I would like an email notification if someone replies to my comment?   

- F1413040134

by: Mark Trenda08/01/2011

Is this review helpful?

e-trailer did a great job in getting this item out quickly. i ordered it and within five days it was on my front door the jack is really sturdy and easy to attach. it would be nice if this model came in a smaller design for 400lb tongue weight, the handle also folder in because it does stick out a little bit. Not much of an issue just visual thing for me. like everything tucked away. this is an impressive trailer jack, and a good recommendation for anyone that needs the extra lift of 1600 lbs, i have this on a small pwc trailer so the lift is not really being tested. pros: nice looks easy bolt on swivels out of the way nicely locking handle large wide base wheel easy crank, with good elevation for each turn High quality parts cons Large post diameter rubber wheel stopper, not a wheel lock 20678

comment on this review

Ask your question or add a comment to this product review?

Name: (example: John S.)

Contact email:

* please make sure your email address is correct (should look like name@domain.com)

Comment

Yes, I would like an email notification if someone replies to my comment?   

- F1413040134

by: Arek M.02/11/2011

Is this review helpful?

Product was delivered promptly and purchase expierience was overall pleasant. This is great looking jack that is made to withstand anything. It is very well built and comes with all necessary hardware to install it. It has many unique feautures like wheel lock and handle lock to prevent crank handle from random swinging while traveling. Unfortunately, in my case, product arrived damaged (partly due to rough handling by the shippers) and I was forced to make arrangement for return/exchange. This was also very easily accomplished thanks to friendly and effiecient customer service. In short, I will shop on etrailer.com more often and will be happy to recommend this site to my friends. Thank you for great service and quality product.7053

comment on this review

Ask your question or add a comment to this product review?

Name: (example: John S.)

Contact email:

* please make sure your email address is correct (should look like name@domain.com)

Comment

Yes, I would like an email notification if someone replies to my comment?   

Ask the Experts about this Fulton Trailer Jack
Do you have a question about this Trailer Jack?

• Does the Stated Capacity of Trailer Jack Part # F1413040134 Represent the Trailer Tongue Weight
  
• The Fulton 1600 lb Jack is rated for a 1600 lb static load. This means that the jack can safely lift 1600 lbs on a stationary trailer straight up. If the tongue weight of the trailer is exactly 1600 lbs and the trailer has a wheel on it and you should hit a small obstruction with the jack wheel while moving the trailer, the jack will probably bend. In other words when choosing a jack, you will want to go with a jack whose capacity is higher than the tongue weight of the trailer.
  view full answer...


• Recommendation for a Trailer Tongue Jack for a Roll-a-Home Mini Tent Trailer
  
• It sounds like the Fulton F2 Swing-Up, Wide-Track Trailer Jack, item # F1413040134, would be a good choice for your trailer. It features and adjustable mounting plate that can be moved to any point in the track on the backside of the jack, and will mount to 3x3 and 3x4 trailer frames. The center of the swivel mount will be 12-1/4 inches from the bottom of the wheel when the bracket is adjusted to its lowest height, and 7 inches from the top of the jack when adjusted to its highest height. De
  view full answer...


• Will the Fulton F2 Swing-Up Jack work with a 12 Foot Coleman Pop-up Camper
  
• As long as the tongue framing on your Pop-up Camper is 3x3 or 3x4 inches and you will have clearance to rotate the side wind crank 360 degrees at the side of the trailer, the Fulton F2 Swing-Up Jack # F1413040134, should work great. If your trailer frame is not this size or you do not have clearance to rotate the handle, send me a photo of the jack you have and I will be glad to make a recommendation for you.
  view full answer...


• Comparing the Fulton F2 Trailer Jacks with 1 Wide Wheel or the Twin Track Wheels
  
• For ease of maneuverability, I would go with the twin track Fulton F2 Trailer Jack, # F1413020134. The two wheels will have more ground surface contact and the weight will be better distributed with 2 wheels which are both good features on soft ground. Jacks are good for short distances but for a better solution you may be interested in the Buffalo Tools Trailer Dolly, # BTTRDOLLY. It has a 1-7/8 inch diameter ball and is good for up to 600 pounds tongue weight.
  view full answer...


• Bolt Hole Measurements for the Fulton F2 Swing-Up, Wide-Track Trailer Jack
  
• I went out to the warehouse and measure the bolt hole pattern and diameter on the Fulton F2 Swing-Up, Wide-Track Trailer Jack, # F1413040134. Up and down they are 3-1/2 inches on center. Left to right they are 4-1/2 inches on center. The bolt holes are 1/2 inch in diameter.
  view full answer...


• Will Fulton F2 Swivel Trailer Jack, # F1413040134 Fit on Aluminum EZ Loader Trailer
  
• I do have wheel replacement kits available for the Fulton jacks, if you think replacing just the wheel would solve your problem. I would need to know the model of jack you have to see if there is a replacement wheel available. I am including a link to a product page that will show all of the Fulton wheels I carry. To upgrade to a newer Fulton jack I would need to know what size of jack you have on your trailer now, or the tongue weight of the trailer, the size of trailer tongue, and how much
  view full answer...


• Swing Up Jack Needed for a Coleman Trailer with a Battery Box Mounted on the Tongue
  
• As long as the tongue on your trailer is a 3 x 3 or 3 x 4 inch tongue, the Fulton F2 Trailer Jack, # F1413040134, that you mentioned should work great. The Pivot point on this jack is adjustable. I produced a short video, see link, showing how to adjust the mounting bracket so you can determine if there is clearance for the battery box on your trailer. At the highest point the center of the swivel is 6-1/2 inches from the top of the jack. This should give you clearance to mount the jack and s
  view full answer...


• What is the Retracted Height of the Fulton F2 Swing-Up, Wide-Track Trailer Jack, # F1413040134
  
• The Fulton F2 Swing-Up, Wide-Track Trailer Jack, # F1413040134, is a unique jack. The mounting bracket is adjustable up and down the jack leg 8 inches. The overall height of the jack when retracted is 25 inches. When fully extended it is 35 inches tall.
  view full answer...


• Retracted Height from Wheel Bottom to Center of Mounting Bracket on Fulton F2 Trailer Jack 1600 lbs
  
• I went out to the warehouse and pulled a Fulton F2 Trailer Jack, # F1413040134. With the mount set to the lowest setting, I took the measurement you needed. From the bottom of the wheel to the center of the mount is 12-1/4 inches. Jacks that can get very low are the rack and gear type, like # BD161300. With this jack, though, you are looking at only 750 pounds capacity. If the tongue weight of your loaded trailer is under that this may be a viable option.
  view full answer...


• Corrosion Resistant Trailer Jack for a Trailer with 2 Inch by 4 Inch Frame
  
• I think the best choice is going to be a bolt-on Dutton-Lainson jack with a Zinc plated yellow chromate TUFFPLATE finish. If your trailer has a channel tongue, jack # DL22300 fits up to a 3 x 5 inch frame. If you have a square tongue use # DL22800. The finish on these jacks is very corrosion resistant. An aluminum jack that will fit your frame size is not available.
  view full answer...


• Minimum and Maximum Lift Height of Fulton F2 Swing-Up Trailer Jack # F1413040134
  
• The mounting bracket of the Fulton F2 Swing Up Jack # F1413040134 is actually height adjustable with 8 inches of travel. The retracted center of the bracket height when adjusted to its lowest height is 12-1/4 inches and the retracted height when the bracket is adjusted to its highest point is 19-1/2 inches. Since the maximum jack travel is 10 inches, the fully extended center of bracket height at its lowest height is 22-1/4 inches and fully extended when adjusted to its highest point is 29-1/
  view full answer...


• Are Replacement Pull Pins Available for Fulton F2 Swing-Up, Wide-Track Trailer Jack # F1413040134
  
• We do sell a replacement for the pull pin on your Fulton F2 Swing-Up # F1413040134. It is the Replacement Pull Pin Kit # F500136, which fits the Fulton F2 series swing-up jacks. It includes a spring and retaining ring in addition to the replacement pull pin.
  view full answer...


• Fulton F2 Swing Up Jack # F1413040134 for 2x3 Inch Trailer Frame
  
• The problem with trying to mount the Fulton F2 # F1413040134 on a 2x3 trailer frame is that the u-bolts do not have enough threads on them to draw the jack tight. If you can locate the appropriate u-bolts, you can by all means use them. You would need a u-bolt with a 3-1/2 inch span, center to center with legs no longer than 3 inches. Your best bet would be a weld-on model like # F1413060334.
  view full answer...


• Fit of Fulton Fulton Trailer Jack, # F1413040134, on Dual Jet Ski Trailer
  
• The Fulton Trailer Jack, # F1413040134, will fit 3 inch x 3 inch and 3 inch x 4 inch tongues and has a capacity of 1,600 lbs. If your dual jet ski trailer is under 1,600 lbs with jet skis and has either one of those tongue sizes it should work.
  view full answer...