Trailer Jack > Stabilizer Jack > Pull Down > Bolt-On, Weld-On > 6 Inch Lift > 650 lbs > Domar

Stabilizer Jack - 650 lbs

Rating: rating rating rating rating rating
213 reviews

Code: TJ01RT

Retail:$18.08

Price:$16.95

Shipping Weight: 6 pounds

Shipping Special

Orders of $150 qualify for free shipping.
Lowest Price Pledge

Domar Trailer Jack TJ01RT Review - Video
Domar Stabilizer Jack Review - Video

Domar Trailer Jack - TJ01RT

Simply pull and swing the jack down to help provide additional support for your trailer. Great when leveling pop-ups or to give more support when loading with ramps or the tailgate.

Capacity: 650 lbs
Static load: 750 lbs
Easy-to-use, fold-down jack for stabilizing and leveling trailers
- Flips down for stabilizing, flips up for travel
Adjustable height
- Optional handle rod (sold separately) can be used to easily fine tune height
Attach to trailer ends, frame or tongue
- Bolt-on or weld-on installation
Retracted Height: 11-1/2"
6" Lift
Fully extended height from top of bracket to bottom of foot is 18"
When the foot is put in the horizontal position: it measures 3-1/2" from top of mounting bracket to the bottom of the horizontal bar
Mounting Platform is 4" Long x 1-7/8" Wide
- Holes are 3" apart
- Holes are 7/16" in diameter

Domar Company # TJ01RT

Replaces 82300

Video of Stabilizer Jack - 650 lbs

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Domar Trailer Jack TJ01RT Review

Video review domar stabilizer jack tj01rt

Domar Stabilizer Jack Review

Video Transcript for Domar Trailer Jack TJ01RT Review

Today, were going to review part number TJ01RT. This is the Domar Stabilizer Jack. This jack you can simply pull and swing the jack down to help provide additional support for your trailer. Its great when leveling pop-up campers or to give you more support when loading with ramps or the tailgate. It does have a weight capacity of 650 pounds. Its easy to use.

A fold-down jack for stabilizing and leveling trailers. Flips down for stabilizing, and then it flips up for travel. It does have an adjustable height, right here for the leg. If this is mounted to your trailer -- this part would mount to your trailer. If you pull it out and fold it down, then you can just push this lever and it would release the foot.

That will give you an adjustable height. Now, you can actually fine-tune that height by purchasing optional handle rod which is sold separately. Its part number 80480. What this would do is allow you to -- if you move this into this second hole above the lever and make sure it comes through the back hole, you can push down on it and it would raise it up one notch at the time. If you need to go further, again choose the second hole, make sure it comes through the back right here, and just push it up.

That way, you could adjust it to whatever height you needed. This does attach to trailer ends, the frame, or the tongue. This part here, the mounting bracket, is a bolt-on. It has two mounting holes with 3 inches between center to center of the holes or it can be welded on. The retracted height would be 11-1/2 inches and with this leg fully extended out as far as it would go, would be 18 inches.

Your lift would be 6 inches of lift. Then, basically if we put the foot, if pull it, spring load it, put it into horizontal position, this would be mounted on the trailer, so its on the horizontal position, it measures to 3-1/2 inches from the top of the mounting bracket to the bottom of the horizontal bar. The mounting platform itself is 4 inches long by 1-7/8 inches wide. Again, these mounting holes, I mentioned, are 3 inches center to center. That should do it for our review on part number TJ01RT.

Customers compare TJ01RT to these similar products