Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15" Lift - 5,000 lbs

Video Transcript for Bulldog Trailer Jack BD178203 Review

Today were going to take a look at the Bulldog Round pipe mount swivel jack part #: BD178203. This jack is designed to be used with weld-on applications. On the inside of the jack will be a steel tube that youll weld to the frame of your trailer. The collar of the jack fits around that steel tube and it will allow you to swivel the jack up or down so you can tuck it out of the way when youre trailering down the road. Its a side wind design jack with an ergonomic handle that makes operating the jack smooth and easy. Theres a footplate welded to the bottom of the inner tube that provides a nice flat base for supporting your trailer.

The footplate and the inner tube are finished in a zinc plating to help keep them long lasting. The jack is covered by a limited five year warranty and it has a lift capacity of 5,000lbs. The tubing diameter is 2 inches. The jack features about 6 inches of clearance, at the top, from the center of our mounting point to the top of the jack. It has a retracted bracket height of about 15 inches from the center of the mounting plate to the bottom of our footplate.

Now we have the same jack already extended all the way out. That same measurement when extended fully is about 30 inches. The difference between the two, 15 inches, is the amount of lift the jack will provide. And thats it for our quick look at the Bulldog round pipe mount swivel jack part #: BD178203.