Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 10" Lift - 5,000 lbs

Bulldog Trailer Jack - BD178201

Footplate and 5/8" diameter pin are included with this round, tubular, swivel-mount jack. Ideal for agricultural and commercial uses. Jack has 10-2/5" retracted height and measure 6-2/5" from mounting bracket to top, excluding handle.

Features:

• Dependable jack is recognized as industry standard for agricultural and commercial applications
  • ASABE compliant
• Tubular swivel design lets you swing jack up for travel, down for use
  • Included pull pin holds jack in place
• Precision-fitted parts provide exceptional stability and reliability
• Sidewind handle has smooth, ergonomic design for easy cranking
• Outer tube is gray-paint finished
• Inner tube is zinc plated
• Weld-on pipe mount and standard footplate included

Specs:

• Bracket height:
  • 10-3/8" Retracted
  • 20-3/8" Extended
• Lift: 10"
• Clearance: 6-3/8" from mounting bracket to top of jack
• Tubing diameter: 2"
• Handle radius: 5-13/16"
• Pull pin diameter: 5/8"
• Lift capacity: 5,000 lbs
• Limited 5-year warranty

178201 Bulldog Round Tubular Swivel Jack, Sidewind, 10" Travel, 5,000 lbs - SWS 178 DTSF w/ P & C

Customers compare BD178201 to these similar products

Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15" Lift - 5,000 lbs$79.95

Pro Series Round, Pipe-Mount Swivel Jack w/ Footplate - Sidewind - 15" Lift - 5,000 lbs$42.95

Pro Series Round, Pipe-Mount Swivel Jack w/ Footplate - Sidewind - 10" Lift - 2,000 lbs$30.95

Bulldog Pipe Mount Swivel Sidewind Jack, 2,000 lbs$62.95

Pro Series Round, Pipe-Mount Swivel Jack w/ Footplate - Sidewind - 10" Lift - 5,000 lbs$38.95

Customers Who Purchased This Trailer Jack Also Bought...

Bulldog 2-1/4" Long, Weld-On Jack Pipe Mount for 2-1/2" Female Mount and 5/8" Pin $5.99

Plug - Two Wire Pigtail for Sealed Trailer Clearance, Side Marker Lights - 6" Long $0.99

2" Round Grommet - Flush Mount - Open Back $0.95

Trailer Weld-on Stake Pocket $6.99

LED Trailer Clearance/Side Marker Light - 4 Diode, 12 Volts - Sealed - 2" Round - Amber $8.50

Replacement parts available for this product

Replacement Sidewind Handle for Bulldog Round or Square Jacks - up to 5,000 lbs $13.99

Replacement Thrust Bearing for 5,000-lb Capacity Bulldog Jacks $11.99

Ask the Experts about this Bulldog Trailer Jack
Do you have a question about this Trailer Jack?

• Can A Wheel Be Added To The Bulldog Round, Pipe-Mount Swivel Jack # BD178201
  
• When a wheel is added to a jack, the weight capacity will change to what the weight capacity is on the wheel. The wheels will only have a weight capacity of from 800 lbs. to 1,500 lbs., so that would dramatically reduce the weight capacity on a 5,000 lb. jack. The Bulldog Round, Pipe-Mount Swivel Jack # BD178201 comes with a standard footplate. They do not offer a wheel option on this pipe-mount jack. I do not have a pipe mount jack that will accept a wheel. I do have the spring-loaded pul
  view full answer...


• How to Choose the Correct Jack for a Small Utility Trailer
  
• When choosing a jack for your trailer you will want to choose a jack that has enough lift to lift the coupler over the hitch ball on the tow vehicle. I would recommend hooking your trailer to your truck and, with additional help, lift the trailer coupler a few inches above the hitch ball. With the trailer tongue lifted, find an appropriate location for the jack on your trailer tongue and measure from the center of the frame to the ground. This will tell you the approximate extended height that y
  view full answer...


• Which is Better, a Side Wind Trailer Jack or a Top Wind Trailer Jack
  
• You would choose a side wind or top wind jack based on several factors. Each has its advantages. If clearance is an issue for the radius of a top wind, then you would choose a side wind. The opposite is also true. It is my experience that a side winding jack is easier to turn. However, if the tongue is low to the ground a top wind would be a better option because you would not have to bend down as much and it would not be as awkward to turn. A side winding jack normally has inner components t
  view full answer...