
Rating: 




24 reviews
Code: C12270
Retail:$330.54
Price:$198.32
Shipping Weight: 44 pounds
Shipping SpecialPerfect for light-duty towing, this custom, Subaru Outback Wagon trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
Specs:
Note: All non-trailer loads - bike racks, cargo carriers and so forth - should be supported with stabilizing straps. Failure to properly support these loads will void your hitch warranty from Curt.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
2002 Outback Wagon by Subaru Owners Who Purchased This Trailer Hitch Also Bought...
Average Customer Rating: 



4.7 out of 5 stars (24 Customer Reviews)




by: Jina Morris03/28/2011
Is this review helpful?
The hitch works great. Can't wait for warmer weather so I can haul my bike to the bike trails! My husband even installed it for me at home.10506




by: Corey B02/08/2011
Is this review helpful?
Bought a Curt hitch for my Subaru Outback. It fit well without any drilling, Just had to trim the rear bumper a bit. No big deal really. The 1-1/4" to 2" adapter I bought is also a Curt. There seems to be a little slop but that in no way reflects the great customer service I received in separate orders with etrailer. Quick shipping on both orders and price matching on my latest. Great service was what brought me back when I recently replaced my vehicle and needed a new hitch setup.6842




by: Chad K.08/17/2012
Is this review helpful?
Curt's fault, but the hitch was about 3/8" too narrow. Had to break out a sledgehammer and put spacers in different places to mount the hitch. Once I got it on there though, I am completely satisfied with it. It is getting the job done, but I would have concerns about putting the rated load on there. (2000/200 on the '93 Subaru Legacy)52024




by: Chuck P.09/22/2011
Is this review helpful?
Shipped fast. Quality product. Easy installation. Took me a little longer than the estimated install time, dealing with the evap canister mount on my subaru, but went together as designed.24366




by: Brandon08/29/2011
Is this review helpful?
I was pretty confident in my ability to install my new hitch even before I started shopping. Once I found etrailer.com and checked out the install videos my confidence was certainly increased. The hitch and wiring harness were packed well, very securely, and delivered on time. In fact, after placing my order I was emailed to say that it was able to be expedited so it would arrive on Friday rather than Monday. Score 1 for etrailer.com. Set out Saturday morning to install and literally EVERYTHING went exactly as the video and instructions said they would and I managed to get it done in just under 45 minutes with very basic hand tools. I would definitely do business with etrailer.com again and have already made many recommendations. Thanks!!23021




by: Doug R.03/21/2011
Is this review helpful?
Great price, easy install and fast serv ice.9964




by: Bryan04/30/2013
Is this review helpful?
Great product! Super-easy to install with just a little reading in the comments. I used ramps instead of jack stands (with carefully blocked front wheels) but about 45 minutes later I had a trailer hitch (on my '02 Outback H4) and two hours after that I was towing my first trailer. It needed a TINY bit of tightening after the first 100 miles with the trailer but the ensuing several hundred have left it firmly attached. 78510




by: KenW04/27/2013
Is this review helpful?
The tow bar I ordered fit perfectly, installed in minutes! Great product, free delivery charge, what more could I ask? 78092




by: Patricia03/26/2013
Is this review helpful?
Product as expected. Fast on time delivery. Great communication. 72492




by: Jason03/09/2013
Is this review helpful?
The hitch was great, and the install was relatively straight forward. The product could have been packaged better. There was quite a bit of extra room in the box, and the hitch arrived bent. Luckily we had a LARGE bumper jack to straighten it out. 5/5 for the product. 2/5 for the packaging.69819




by: Roger02/12/2013
Is this review helpful?
Produce was as described and installation was very smooth. The instructions were complete and accurate. Thank you for your prompt service. Roger65977




by: Art C.10/26/2012
Is this review helpful?
Installed on my 01 Outback in order to use a rear bike rack. Received expedited shipping at no cost. Etrailer had the best price for this which includes everything you need for installation (fishwire) and a drawbar/pin for towing. Tips for installation: 1. Jack the car and place on jack stands. Put on eye protection. 2. Remove carbon canister AND bracket in the right rear corner (looking from the back of the car). You need to remove 3 nuts and 2 bolts using 13 mm and 12 mm sockets. The actual canister and bracket can be left to hang. 3. Fishwire the bolt and spacer into the LARGE hole closest to the tow hooks. 4. Install hitch with BOTH vertical surfaces which bolt on to the tow hooks to the LEFT of them. 5. Thread the nuts to the carriage bolt first, lightly and then thread the nuts to he tow hooks/holes maximally first (don't forget to use a spacer on either side of tow hook). You need a 3/4 socket and use correct torque wrench setting. 6. Torque the carriage bolt nuts down next. 7. Reinstall bracket and canister and unjack. You are done.58173




by: Andy R09/29/2012
Is this review helpful?
Great product - easy to install (helps to have two people and an impact wrench) - only took us half an hour or so. In retrospect, we did not see why there was a need to lower the exhaust to do this install - we did it, but it seemed to serve no purpose. The drawbar - I probably won't ever use the one supplied - the 3/4" rise is not nearly enough for most attachments - I put a 3" riser on it and it matches up much better with my log splitter, trailer, etc. Also, given that the mounting (on an Outback) is so far in, you may find that safety chains on your attachments need to be extended to reach the holes on the receiver.56135




by: Erik H09/21/2012
Is this review helpful?
My hitch and accessories arrived much faster than was originally quoted! Amazing service! The hitch fit was ok ( I have a 99 Outback Limited ), as I had to use some spacers to make it line up correctly. It lined up in the frame/ carriage bolt area just fine, but the area where it hangs down it was a little off and I had to use some elbow grease to make the bolts go through. Haven't hauled anything with it yet, but it looks great and I installed it by myself in a little over an hour. Overall great looking hitch ( looks stock ) and great customer service from etrailer!!!55409




by: john k09/19/2012
Is this review helpful?
fast shipping and no damage. cant wait to bolt it on..55099




by: Louie T.08/10/2012
Is this review helpful?
Easy to install, once you know which holes to use! Be sure to get that right the FIRST time! Customer service via telephone was spot on with their advice and assistance. Have not towed anything with it yet...51305




by: Charles A08/01/2012
Is this review helpful?
Great product, this is the second Curt hitch that I have purchased. The first from this supplier. I ordered on Thursday evening and had the hitch by Monday noon. I live in Central PA.50206




by: Dan W07/25/2012
Is this review helpful?
I installed this hitch on a 13 year old outback wagon. I'm not a great direction follower and it was a pretty straight forward process, but taking a few minutes and reading the simple directions was very helpful! You just need a couple of 3/4 wrenches or sockets plus a torque wrench and it is a job anyone could do. I'm pleased with the quality of the hitch and will buy from etrailer again!49266




by: Shawn Edwards07/10/2012
Is this review helpful?
Installed just like it was suppose to. Loved the bolt wire, made it so easy/47364




by: Leon G.06/08/2012
Is this review helpful?
Very well made and heavy duty. It literally took less than 30 minutes to install (with hand tools). Very happy, would highly recommend. Customer Service and communication was also outstanding. Received updated emails regarding status of order. Quaity and service was nothing less than excellent. No fuss, no muss - from ordering, receiving and installation. We will submit pictures of it in use soon.43276




by: Brook F08/03/2011
Is this review helpful?
Hitch is of good quality and instructions are pretty easy to follow. The problem was the hitch was delivered bent, it is really beefy so I have no idea if it was sent that way or UPS managed to bend or drop it during shipment. It took me, a friend, a lift, and lots of prying and cussing to get it to line up enough to get the bolts to line up. I would have given up if I was trying to install this without the help of the lift. 21052




by: Denny T.07/06/2011
Is this review helpful?
The hitch was very easy to install. Very happy with the product. Thank you.18715




by: richard M06/14/2011
Is this review helpful?
my package arrived very quickly and in good condition. and i must say i was surprised at the quality evident in its construction and the paint job on it. looks baked on and not simply a spray paint job. the metal is very well welded and of ample thickness. i do not forsee any problems with it. and on my Subaru Outback I had been looking for a trailer hitch for quite a while and was always told that there were none made for it. I lucked on your site on the net during a search. glad i did. thank you for a beautiful product for a limited size market like the outback. 16979




by: Greggory L.05/20/2011
Is this review helpful?
This is the second hitch I have purchased from etrailer. As usual their service and product are wonderful.14929
Ask the Experts about this Curt Trailer Hitch




Tech Tip
No drilling required for installation, Exhaust must be temporarily lowered for installation




Related Products...
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.