Rating: 
10 reviews
Code: 36234
Retail:$310.03
Price:$185.95
$165.95 after Mail In Rebate
Shipping Weight: 35 pounds
Shipping SpecialThis fully welded, corrosion-resistant Subaru Legacy trailer hitch is perfect for your light-duty towing and hitch rack needs. Tested Tough guarantee ensures that this hitch exceeds industry strength standards. Drawbar, pin and clip sold separately.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
1992 Legacy by Subaru Owners Who Purchased This Trailer Hitch Also Bought...
Average Customer Rating: 4.7 out of 5 stars (10 Customer Reviews)
by: Jerry J.08/20/2011
Is this review helpful?
The hitch arrived quickly and even thought the box was mangled on one end, everything inside was fine. I installed the hitch by myself in my driveway on a 12 year old Outback. I did have to remove/lower, the emissions box and bracket, ( the two bolts holding the bracket on were very rusty, but I finally got them out without anything breaking) just to get the one side of the hitch in place, but everything fit perfectly. I actually held the hitch up with one knee and put the first bolt through the tie down loop to hold it and from there on it was easy to insert the special nuts inside the frame and finish bolting it on. I used an anti-seize compound on all the nuts and bolts, in case I ever want to remove the hitch. I also cut the ends off the special nuts, because they were sticking out of the frame holes and I wanted to put the rubber plugs back in. The tailpipe just touches the hitch where it goes over it, which really isn't a problem, but I may try to lift the muffler a little so it clears completely. The wiring harness was a simple plug in, by the left tailight, but a little tricky to get it to run out of the car. There actually was an oval rubber body plug up under the fender that you can just barely see from inside, and you can feel from outside, that I popped out and put a hole in for the wiring harness to go through. It was also a little tricky to get back in place with the wires in it, but it ended up working out nicely. It really was an easy install, my only problems came from rust, on an older car. The whole thing fit nicely and is tucked under the car out of the way. I then towed a 1100 lb. trailer on a 700 mile trip into Canada and back, and the hitch worked fine. 22354
by: Dave B01/14/2011
Is this review helpful?
92 Subara Legacy L Hitch fit excellent. Took less than 30 minutes to install. Two 1/2" holes need to be drilled into frame. Very satisfied with etailer's price and products.5519
by: Erik J.03/08/2012
Is this review helpful?
Ordered this hitch for my '98 Outback wagon. It arrived very quickly, sooner than I was expecting, about 5 days. The box was in good shape as we're the contents. Hardware was taped to the hitch in a separate bag. I chose this particular hitch as the brace that goes under the exhaust is tighter up to the exhaust, compared for instance, to the Curt. It only took me about an hour to Install, and was easier than the instructions said. I was concerned about the clearance of the tailpipe after reading another review, but I had about an inch of clearance with no changes to anything. I did not have to lower the exhaust or cut the heat shield as the instructions said I might, I belive this is for the newer gen Outback. I did have to lower end, haunted canister and hanger. Even the drilling was simple. Just bolt up the sides to full tightness and drill right through the holes, no need to mark anything. You will have to undo this again to finish install, but super easy. Thanks to Etrailer for the quick delivery, and constant contact availability. Cheers, Erik33326
by: Matt Field05/01/2011
Is this review helpful?
A bit hard to install by myself but got the job done in an hour and a half.12625
by: brian07/16/2012
Is this review helpful?
installed without too much difficulty, it helped to have an extra set of hands. one of the square washer/tabs on the charcoal canister needed to be replaced with a normal round washer in order for it to fit around the hitch, no big deal. powdercoat is tight on the receiver, my ball hitch wouldn't fit in at first. Again no big deal i'm happy with the hitch for my '99 legacy outback, price can't be beat and etrailer is awesome with communication and information.48059
by: Craig M.06/27/2012
Is this review helpful?
Installed with no problems on my 96 Subaru Legacy Outback wagon. The most difficult part is drilling the two half-inch holes, which really isn't that bad except I did it lying on my back and all the hot metal shavings fell on my arms. Took me a leisurely total of 90 minutes.45810
by: Mike W04/03/2012
Is this review helpful?
Good product, Showed up in good condition, installed in 15 minutes. Completely satisfied 36027
by: J C04/01/2011
Is this review helpful?
Easy to install, great price 10893
by: Sam01/07/2011
Is this review helpful?
Hitch for 2002 Subaru Outback I was very impressed with the service and the product! Etrailer.com shipped my hitch, for free I might add, and it arrived a day earlier than expected. Installation was a breeze. Saved me hundreds of dollars over a Uhaul installation! Thanks Etrailer.com!!5112
by: peter07/08/2011
Is this review helpful?
The trailer hitch arrived exactly on time. The box was mangled but everything was well attached to the hitch so it was all there. The hitch fit perfectly-almost. It was too wide for the car's tow hooks by about 1/4". I grabbed two thick washers and put them in just the right place and all is well. Since you didn't make the hitch, I guess the issue was the the car company or the hitch company who measured wrong. Thanks.18878
Ask the Experts about this Draw-Tite Trailer Hitch
Tech Tip
Drilling required for installation, Minor heat shield modification may be required
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
