Call at 800-298-8924 for expert service. We are your Oldsmobile trailer hitch experts, and offer a lowest price guarantee. carries a complete line of Hidden Hitch products for your Oldsmobile Intrigue 2000. Hidden Hitch Trailer Hitch Receiver with Drawbar - Custom Fit - Class I - 1-1/4" part 60833 from Hidden Hitch can be ordered online at Complete trailer hitch installation instructions and technical support.
Select Your Vehicle

View Cart

Trailer Hitch > 2000 > Oldsmobile > Intrigue

2000 Oldsmobile Intrigue Hidden Hitch Trailer Hitch Receiver with Drawbar Class I - 1-1/4"

Hidden Hitch Trailer Hitch

(6 reviews)

Code:   60833



Shipping Special

Shipping Weight: 22.47 pounds


2000 Oldsmobile Intrigue - Hidden Hitch Trailer Hitch Receiver with Drawbar - Custom Fit - Class I - 1-1/4"

Specially designed for light-duty applications, this fully welded Oldsmobile Intrigue trailer hitch receiver features a powder coat finish over an e-coat base to ensure superior corrosion resistance. Drawbar, pin and clip included.


  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your Oldsmobile Intrigue
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at
  • Black powder coat finish covers e-coat base for superior rust protection
  • Drawbar, pin and clip included


  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty Technical Support

At we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

60833 Hidden Hitch Class 1 Trailer Hitch Receiver

60833 Installation InstructionsInstallation Details 60833 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
2,000 lbs.

Tongue Weight (TW):
200 lbs.

Weight Distribution Capacity
Hitch does not allow
use of weight distribution

Trailer Hitch Installation Instructions 60833 Installation instructions

Manufacturer Estimated Installation Time

Tech Tip

Drilling required for installation , Trunk access required for hitch installation

Video of Hidden Hitch Trailer Hitch Receiver with Drawbar - Custom Fit - Class I - 1-1/4"

Videos are provided As a guide only. Refer To manufacturer
installation instructions And specs For complete information.

Video Transcript for Trailer Hitch Installation - 2003 Buick Century

Today on this 2003 Buick Century we are going to install part number 36374 from Draw-Tite. This will also apply to part number 90981 from Hidden Hitch. Now you can see the hitch is already installed on the vehicle. And we will give you a couple of measurements that will help you out in ing some accessories, such as a ball mount, bicycle rack or cargo carrier. From the top of the receiver opening down to the ground is going to be 12-1/2 inches. And then from the center of the hitch pin to the outside edge of the bumper is going to be 7-1/2 inches. 0:31

The first thing we need to do is go ahead and lower the exhaust because we need access to the inside of the frame and the bottom of the frame as well. We are going to remove these two hangers here and there is going to be one a little bit farther back that we will remove as well. We will go ahead and lower the exhaust and we will also use a strap to help hold the exhaust while we lower it. We will spray down the rubber hangers with some lubricant to make it a little easier to remove. Now we can use our strap to lower our exhaust a little more, as we need. OK, we will go ahead and turn our attention to the driver side of the vehicle and we will show you where the hitch will mount up on the frame. Basically use these two existing holes right here and also we are going to have to drill a hole into the side of the frame as well, up here. To drill that hole, we are going to use the hitch as a template. And before that, we are going to go ahead and install our hardware to hold the hitch up. 2:00

We are going to use this as the access hole to install the hardware. And also we are going to use a wire pull to help pull the bolts from the inside out. This is our wire pull right here and basically it is a formed piece of wire that actually will thread onto the end of a bolt. We use this to go ahead and pull the bolt from the inside out of the frame. A wire pull is also known as a bolt leader, part number 80101-1. And that is for a 1/2 inch bolt. To use a wire pull, we are going to put it through the hole we are going to use and then push it out our access hole. We are going to push on a block onto the wire and push it into the frame. And then we will thread on our bolt. Pull it on through and we are done. Now we will go ahead and do the same thing for this hole. And we will repeat the same process on the other side of the car. Believe it or not, the driver side of the vehicle is going to be identical to the passenger side as well. 3:07

Now at this point, we can go ahead and lift the hitch in position. And what we are going to do is just hold it up. Mount it to the existing hardware we have. We are just going to temporarily put some nuts in there to hold it in place. That way, we can use the hitch as a template to mark our hole in the side of the frame. You definitely want to have an extra set of hands when doing this part. Now what we are going to do next, we have our hitch in position, let us go ahead and snug down the bolts. That will put our hitch in the proper spot to mark our hole to drill out. Now to mark our hole, we are just going to use some spray paint and we are just going to spray paint the hole. And then we will go ahead and lower our hitch and then we will have our mark. We will do this on both sides of the hitch. We will let the paint dry for a few minutes and then we will go ahead and take the hitch back down. 3:54

Alright, now you can see where we made our mark in the frame. We will start off with a 1/4 inch pilot hole and then enlarge it up to 9/16. With our holes drilled out, let us go ahead and reinstall the hitch. This time we can put up all our fasteners. To install our fastener that goes in the side of the frame, we are going to use this handle nut and this bolt. And this handle nut you can move any way you want to make it easier to get to the bolt hole on the inside. We are just going to go ahead and hold this up there and then thread our bolt in from the other side. With the driver side done, let us go ahead and repeat the same process back over on the passenger side. OK, with all of our hardware loosely installed, let us go ahead and tighten down everything hand tight and then we will go ahead and torque them down as specified in the instructions. Now that the hitch is completely installed, let us go ahead and reinstall the exhaust back into its proper spot. And then we are finished. Alright and there you have it for part number 36374 from Draw-Tite on a Buick Century.

Customer Reviews

Hidden Hitch Trailer Hitch Receiver with Drawbar - Custom Fit - Class I - 1-1/4" - 60833

Average Customer Rating:  5.0 out of 5 stars   (6 Customer Reviews)

Specially designed for light-duty applications, this fully welded vehicle trailer hitch receiver features a powder coat finish over an e-coat base to ensure superior corrosion resistance. Drawbar, pin and clip included.

- 60833

by: Steve J.02/23/2012

I had been needing to get a hitch for my 2003 Buick Century for quite some time. All I have is a small 5x8 utility trailer that I use for getting a full piece of plywood, hauling lightweight items,etc.., so I did not need a big class 2 hitch that would have required loosening of the exhaust system..ugghh. I just happened to come across this site and and look what I found...a custom, hidden, class 1 hitch that did not require the exhaust system to be fought with! I ordered on Friday, it shipped on Saturday ( on Sat. !), and I received it on Wednesday afternoon. It fits perfectly with the four holes lining up just right and all I had to do was enlarge the holes in my frame behind the bumper from 7/16" to 1/2"...easily done...and I was done in less than 30 minutes with the installation. I appreciate the quick response and the personal attention from both George and Katie...thank you. 32367

- 60833

by: Mike S.11/07/2011

The hitch arrived in a timely fashion and was packaged to protect it from damage. The instructions were clear and easy to follow. The provided hardware worked as expected. There were some places where the protective coating had been chipped off, (a couple of corners), but the overall appearance and fit was excellent. I spent more time replacing the drill bit I ruined (it turned out to be a wood bit) than actually installing the item. 26682

- 60833

by: Bruce B06/01/2011

I was completely done with the installation in less than 1 hour. I had watched the online video of an install of the hidden hitch, and was pleased that it was as easy as it seemed. I will definitely buy from here for all my future towing & hitch needs. They shipped fast even though I chose the free shipping option. They emailed me through every step of the process: order received & order shipped. 15860

- 60833

by: John M12/01/2012

I am very satisfied with the service and product I received from My trailer hitch arrived promptly after my order and it was very easy to install. I would buy from them again without reservation. 60407

- 60833

by: Gene06/09/2009

Great etailer Quick ship and easy to install. Detailed instructions included made it a piece of cake. 1962

- 60833

by: Walter J04/05/2012

fit great ez 2 install 36262


Ask the Experts about this Hidden Hitch Trailer Hitch
Do you have a question about this Trailer Hitch?

  • Trailer Hitch Recommendation for a 1999 Pontiac Grand Prix GT Coupe
  • We do have trailer hitches that are specifically designed to fit the GT model of the 1999 Pontiac Grand Prix, but # 60833 is for the SE model only. Instead, you can use # 36241. If you click on the last picture on the product page, you will see a picture of the hitch installed on a similar vehicle. I have included a link to the installation details for reference. If you plan on doing some towing, the recommended ball mount is # 36065 for use in the rise position only. For a pin and clip,...
    view full answer...

  • Trailer Hitch and 2 Bike Rack Recommendations for a 2003 Pontiac Grand Prix SE
  • For your 2003 Pontiac Grand Prix, there are two Classes of hitch available; Class I hitches and Class II hitches. The differences between them will help you decide what works best for you. The Draw-Tite and Hidden Hitch models are made by the same manufacturer so there will be little to no difference between them. But between Classes there are differences. The Class I hitches can handle less tongue weight capacity (200 pounds) and gross trailer weight (2,000 pounds) than a Class II hitch...
    view full answer...

  • Trailer Hitch Recommendation for a 2001 Buick Century
  • What you are describing is a European style hitch where the ball mount is permanently fixed to the hitch. We do not have that type of hitch available for a 2001 Buick Century. All of the hitches for your vehicle will require a separate ball mount if you plan on towing. We also have removable ball mounts because the hitch receiver can be used for other things and not just towing. Things like bike racks and cargo carriers would not fit if the ball mount was permanently fixed. I have included...
    view full answer...

  • Hitch Needed to Pull Lightweight Trailer With 1984 Chevy Corvette
  • Curt does indeed offer a Class I hitch for a 1984 Corvette, part # C11705. However, a trailer hitch is not meant to be installed and removed multiple times. The hardware used to attach the hitch to the frame members is considered a one-time use only item. Repeatedly installing and removing the hitch mounting hardware will weaken the hardware, which could result in the failure of the hitch. Which would be very bad. To complete your towing system, you'll also need the following: Trailer...
    view full answer...

Do you have a question about this Trailer Hitch?

Oldsmobile Intrigue Accessories


At we guarantee:

Highest quality trailer hitch for the best price.

Real product know-how.

  • We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. This helps you get the right product the first time.
  • Every day our teams test, review, assemble and install our products. Our modern installation facilities allow our expert installers and customer service representatives to actually install and use the items we sell, so you can get real advice, from a real person who has the knowledge and expertise needed to solve your problem.

Most detailed, accurate trailer hitch information available.

  • Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.

Information for this part was:

Video Edited:
Zack K
Video Edited:
Andrew K
Written by:
Lindsey S
Expert Research:
Michael H
Updated by:
Laura H
Updated by:
Sarah W

Installations, made easy.

  • We love helping people.
  • We have the most highly trained customer service, hands-on experience, step by step videos and installation instructions. We are prepared to answer any question, give advice, or troubleshoot any problem you come across.

Fast shipping.

Personalized service for life.

  • We provide one-on-one, personalized service from the ordering process through the life of your product.

Trusted since 1946.

  • We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.

Info for this part was:

Video Edited:
Zack K

Video Edited:
Andrew K

Written by:
Lindsey S

Expert Research:
Michael H

Updated by:
Laura H

Updated by:
Sarah W

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Stay Connected

Subscribe to email newsletter


privacy - we don't send unsolicited email reviews reviews

All images, layout and content copyright