Videos are provided As a guide only. Refer To manufacturer
installation instructions And specs For complete information.
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
2016 - 2016 Kia Sportage All Models
2010 - 2015 Hyundai Tucson All Models
2011 - 2015 Kia Sportage excluding SX models
2011 - 2015 Kia Sportage SX models
Video of Draw-Tite Max-E-Loader Trailer Hitch Receiver - Custom Fit - Class III - 2"
Videos are provided As a guide only. Refer To manufacturer
installation instructions And specs For complete information.
Today on our 2015 Hyundai Tucson we're going to take a look at and show you how to install the Draw-Tite custom fit class three trailer hitch receiver. This offers the 2" by 2" opening. Its part number is 75717. Here's what our hitch is going to look like when we get it installed on the vehicle. As you can see, it's pretty clean looking. Really the only thing you see sticking down is going to be the backside of that receiver tube opening and the receiver tube itself.
You're going to have a small flange right here with three pre-drilled holes. Got one, two, and three. If you want to mount wiring or if you want to mount a 4-pole to it, should have a good tab there that's been welded on to do that with. Our main pinhole is going to be the 5/8 pinhole here a little bit further in. That's going to be for securing our ball mount, bike racks, cargo carriers, whatever it is we plan on using. The one just in front of that is a little smaller diameter.
That's for use in conjunction with the j-pin stabilization system. We've got a 2" by 2" receiver tube opening. That works great with any of the class three bike racks, cargo carriers, things like that that we'd want to put in. As you can see, we've got good room on each side, especially if you don't mount any wiring over here. If we're doing one of the anti-rattle devices or locking hitch pins, we shouldn't have any issue getting that in place. Now as far as towing goes, we're going to have good safety chain connection points on each side to get those secured.
We're going to have a 525 pound tongue weight rating. That's going to be the maximum downward force we can put here at our receiver tube opening. We're going to have a 3,500 pound gross trailer weight rating. That's going to be the total of our trailer and then everything else that we've got loaded up on it. If we go into a weight distribution setup our tongue weight's going to stay the same at 525.
We're going to have a 5,250 pound trailer weight rating at that point. Of course we do want to look into the owners manual of the Tucson to make sure it can handle those loads. If not, we're just going to use whichever of those numbers are the lowest. Now a couple of measurements that you're going to find helpful in selecting your ball mount, bike rack, or maybe hitch cargo carrier will be from the ground to the inside top edge of our receiver tube opening we've got about 13-1/4". Then from the center of our hitch pinhole to the outermost edge of our bumper it's about 4. Now the first thing we're going to do for our installation is just take a safety strap here, just a regular cam buckle strap. We're going to go around the underside of the exhaust. Then we'll cinch that down. Then we'll remove an exhaust hanger located on each side of the muffler here in the middle. We've got one here on the driver side and another one right here on our passenger side. We can use a little bit of spray lubricant just to allow us to slide that off a little bit easier. A lot of times you can just grab it behind it and pull towards you, get it to pop off. Sometimes you'll have to use a little screwdriver or pry bar or something. You can see that's loosened up. We'll just let a little bit of slack onto in our strap, allow that to come down a little bit. Just make it easier to get to our access holes. We're going to have two on each side, one located here and one just behind it. Then we'll have them in the exact same spot over there on the driver side. What we're going to do is spray a little lubricant in there. Then we'll use our nylon tube brush, part number 814092, just to clean those out. We're trying to clear our threads of any undercoating or any dirt that might have been thrown up in there while it's been heading down the road. Do that on both sides. We'll just check to be sure we can thread our bolt up in each of them and then we'll grab our hitch and get it raised into position. Now we can raise our hitch up over our exhaust here. Let's start one of our bolts on each side. Now when doing this, it's a good idea to have an extra set of hands to help you hold up the other side of your hitch. Get that one started about three or four turns. Then we can come to the other side and do this one. Once where those started we'll allow it to rest there when we get our others started. Now we'll just take a quick look to be sure we have our hitch centered. Then we'll snug down our fasteners. Then we can torque them to the specifications we can find in our instructions. Now we can raise our exhaust back into position. We're just going to use a little more spray lubricant. You'll see it will slide in pretty easy. Now we can just pull down our strap. Now with everything back in place and resecured, that's going to complete today's installation of the Draw-Tite custom fit class three trailer hitch receiver, part number 75717, on our 2015 Hyundai Tucson.
Average Customer Rating: 4.9 out of 5 stars (39 Customer Reviews)Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
by: Jim C.04/16/2014
This hitch was for my 2014 Hyundai Tucson. It arrived as promised and in excellent condition. The muffler needed to be dropped in order to install this hitch. No issues with that. A little WD-40 and the muffler popped right off the hangers. I installed this hitch by myself while lying on the ground. No lift, no jack stands, no additional pair of hands. I had asked my wife to come out to hold up one side while I attached the other. Since she was heavily involved in the 2nd hour of "fixing her hair", I continued on my own. I held up one end of the hitch with my feet while using my hands to bolt in the other end. Since half the weight was now supported by bolts, it was easy to reach over to the other side and install those bolts. In all, installation was fast and easy. Oh yes...my wife's hair looked great too. Thanks for asking. 125410
by: Josh M.07/27/2015
First of all, I must say how satisfied I am with Etrailer.com! Super-fast shipping (2 days!) and service personnel who KNOW what they're TALKING about! For me, relatively a novice at any DIY vehicle modifications beyond toolboxes, mudguards, etc., that was just what I needed. The prices are great too, as good as any you will find out there, especially for the package deal, which is what I got. I looked at buying a hitch locally and having it installed, and the cheapest I could get it done for was $450. Plus, I wouldn't have gotten a ball mount, ball, or wiring bracket with that deal. Here on Etrailer.com, for less than $300 shipped, I got the whole package WITH a stainless steel 2" ball. And, the valuable experience and satisfaction of doing the whole thing myself. The project installation videos on this website are INVALUABLE! Made the whole job much easier. Anyway, enough gushing, the hitch itself is of a much better quality than the one I used to have on my truck from the factory. That one rusted after a couple of years, and though fully functional, never looked very nice. I put this new one on our 2015 Kia Sportage, and the fit and finish are superb. A nice glossy black powder-coat on all the metal, plus, being a hidden-type design, it only shows the actual receiver opening below the bumper. Very nice! I was desperate to get a hitch on this new vehicle, since I traded in my F150 to get it, thus losing all my towing and hauling capabilities without a trailer. Now, I have some of that back again, just have to buy a trailer next. Fortunately, we have one at work I can use anytime I need it until I can get one for my family. I would definitely shop Etrailer again in the future. 214811
by: James W.11/01/2015
The draw tite trailer hitch fit perfectly on my 2015 Hyundai Tucson SE AWD. I had more troubles getting the exhaust lowered than I did putting the hitch in place. Installation took about 40 minutes doing it by myself, but I was also on crutches so moving around wasn't easy. 231243
Prior to buying this hitch, I was misinformed about hitches, I thought they were permanent items welded to your vehicle frame. After doing a search online, I came upon etrailer and read the reviews. The reviews were all very good so I decided to take a chance and it was a good chance I took. Installation was very easy, took me and a buddy about 10 minutes. I sprayed silicon on the muffler hangars and cleaned the bolt holes ahead of time. At nearly 40 pounds, it's not too heavy but when you're on your back trying to balance it, that's where I can see another set of hands coming in handy but if I didn't have help, I could've also done it with a small vehicle jack. I did not have to raise my vehicle, Hyundai Tucson, and just laid underneath the vehicle and pushed the hitch up and hand threaded the bolts. We did take the muffler off the hangar on the passenger side but the driver side muffler hangar did not need to be taken off. We each did our side, I tightened it with a ratchet and then torqued to specification. Great product at a great price and easy to install. Now the trailer brake light is next. 153187
by: Steve B10/26/2012
Got the Hitch in 3 days, had an update on shipping in less than 10 minutes from the time the order was placed. These guys do a great job. This particular hitch is very easy to install, it took me and my brother maybe 10 minutes to have the hitch installed and ready to go. You will not be disappointed if your looking for a hitch for your 2012 Sportage don't hesitate to order from these guys. 58174
by: Josh E02/02/2014
Very pleased with this hitch! Installed on my 2013 Kia Sportage in approx 45 minutes. Had the help of my father in law to hold one end of the hitch in place while I installed the other end. Install requires detaching the muffler from its rubber mounts. This was made much easier with a little WD-40 sprayed on the ends of the mounting pins, and a small pry bar. The hitch itself is low-profile; a friend commented on how discreet it looks. It's a great design for the Sportage. Immediately connected a 4-bike rack to the hitch, and am very pleased with the whole setup. Last thing I need to buy is a locking pin that will better secure the bike rack, as well as make its removal easier. Another very satisfied customer! 115466
2 nd order from etrailer after a buddy of mine told me about the site. shipping was fast, and received several updates on status of order. Hitch went in after i dropped exhaust, in about 10 minutes. Great customer service, great prices, great product, perfect directions. Customer for life. 67628
by: Josh S.07/17/2016
This is my second time ordering from etrailer.com and this second time was just like the first. Fast shipping and great customer service. This company goes above and beyond to help their customers. I just got the trailer hitch installed this weekend. Took about 30 minutes as detailed in the directions and the install was very straight forward. I did need a second set of hands to help lift the hitch into place. Once installed and everything put back in place, the clearance was perfect, should not hear any rattling. Will definitely come back for other hitches or lighting kits when they are needed. 272913
by: Scot C.03/09/2012
This company provided exactly what I had hoped for. I have a 2012 Kia Sportage, and purchased a trailer hitch(87612), ball mount(2923), ball(19247), and wiring(118526). It all arrived quickly, and exactly as ordered (they even taped things together inside in big bags so parts don't fall out if the box gets some damage in travel - which mine did, but understandable with a 50lb box like this). I installed it myself (including the wiring following the excellent video). It was all easy to install, and the price was about a third that of the dealer! Everything about etrailer has been perfect. 33404
by: Harold H05/03/2013
I installed the hitch in about 30 minutes. The instructions mentioned removing the muffler supports to allow lowering for clearance to allow installation. However, after trying unsuccessfully to remove the rubber muffler supports, I found that I was able to wrangle the mount past the muffler tail pipe without having to mess with the muffler. I did it alone and used a hydraulic jack to hold the driver's side up while I installed the passenger's side. Simple four bolt installation. E-trailer also provided very quick delivery with standard shipping. 78860
by: Gary H02/22/2013
Hitch fit absolutely perfect!! The hardest part was lowering the exhaust. The rubber grommets attaching the muffler to the frame were not that easy to slide the pins out of. Once lowered (and caution : make sure you have it supported; I used a bungee cord. If you don't, the exhaust will just fall and serious damage could occur), the actual hitch fit like a glove. Less than 10 minutes. The exhaust was raised and pins back in easily; it was getting the pins out of the grommet that took some time. 67444
by: G Marshall07/12/2016
Ordered my part by phone and was treated very professionally. The part I ordered was exactly what I needed. It was not too difficult to install but would recommend two people to hold the hitch in place to get it started. (that was the only difficult thing for me as I did it myself) Hooking up the electrical was a little bit more of a challenge due to tight spacing in the light housing area, but was doable. The hitch came 2 days earlier then promised and in great shape. 271220
by: Nic O06/01/2014
Easy to install. Second receiver I've purchased from etrailer and if I need another in the future, this is where I will buy it. Packaged perfectly and instructions were in the box. I watched the online install video one last time before I installed it. 133656
I have a 2013 Hyundai Tuscan, I installed the wiring harness and hitch in about 3 to 4 hours. The most difficult thing was figuring out how to lower the muffler (wd-40 by the way) and getting on the inside of the back pannel with out tearing anything up. Over all not difficult. The instructions are helpful for small things so that you are not doing more work than nessary. The product was advertised as writen on the website. Great product over all! 71278
"etrailer" Trailer Receiver was perfect fit for Hyundai Tucson. Quick to install. Note: When disconnecting rubber muffler hanger, use a little lubricant on the bracket and the rubber hanger will slide off easily, and back on too. Customer service from "etrailer" was the best and answered all my questions. Hitch receiver looks and works great. "etrailer" has the best products, fastest delivery and great customer support. 267026
by: William B.06/01/2012
Perfect fit, no drilling required. Thought about installing it myself, but didn't have a torque wrench. Instead took it to local garage where lifting the vehicle up on a rack made the job much easier. Took about 20 minutes to install. Lowering the exhaust was the only thing that made this a 20 minute job instead of a 5 minute job. It is "hidden" as advertised, the hitch receiver is the only part visible. 42355
by: ALLEN S10/08/2016
TRAILER HITCH CAME IN 3 DAYS....EXACTLY AS HEATHER SAID....INSTALLED IT IN UNDER 15 MINUTES.....I WOULD HIGHLY RECOMMEND THIS COMPANY AND THEIR PRODUCT LINE AS ORDERING WAS EASY, SERVICE WAS PROMPT, AND THE ITEMS WERE DELIVERED THE DAY THEY WERE PROMISED.......DOESNT GET ANY BETTER... ALTHOUGH, NOW THAT I HAVE A TRAILER HITCH I GUESS I ACTUALLY WILL NEED TO PURCHASE THE BOAT..... 305587
Just installed this hitch receiver on a 2012 KIA Sportage and the bolt holes lined up perfectly. The most difficult part was removing the muffler hanger to fit the hitch bar between the bumper and the tail pipe. The installation took 30 minutes as advertised. Don't forget to thread the bolts into the frame before you begin to clean out the welded nuts. Well built hitch receiver! 63520
by: Tony T.06/13/2012
Usually a bit skeptical about ordering on-line. But - eTrailer customer support was even better than expected. Kept me informed from start to delivery. Product was delivered as promised. This Hitch was a breeze to install on my 2012 Kia Sportage. You can see the quality and durability of this product as soon as you pick it up. Indeed a pleasure to do business with eTrailer. 44017
Awesome.trailer hitch bolted to car perfectly.did it in my driveway in under 30 minutes by myself.if you have a couple of jack stands to hold hitch up while you line it up and get bolts started is a big help. Andrea c. was great in helping answering questions and recommending products, also great communication with process of order and shipping information. 225170
I haven't installed a bike rack yet so I don't know how well the hitch works but the installation of the hitch itself was a breeze and totally worth the money! It took two men and about 15 minutes to install -- beware, it's quite heavy! etrailer also expedited my shipping so I received it sooner than expected. I would shop from you again for sure! 59179
by: mark t.11/26/2013
Extremely satisfied with your product. The quality of the hitch was obvious as I removed it from shipping container. Once I lowered the exhaust installation time was under 10 min. Getting exhaust lowered was no problem either. As advertised it is hidden & delivery was very prompt. 108549
by: Linda B.05/05/2014
This trailer hitch came in a timely manner. My husband installed it in less than an hour. It looks great and will allow us to haul our two bicycles around with a very sturdy bike rack. I would recommend this product to others. 128989
by: Matt S.09/11/2013
It took me all of 15 minutes to install. The hardest part was putting the Muffler support back on. Very easy install. Have not yet towed anything with it yet. But I highly recommend it . You can not beat the price. 99412
Hitch mounts great however wiring kit. Ould use some revisions. The pigtail should be under the vehicle not inside under the trunk. This is the 2 time purchasing from etrailer and i would do it again!!!!! 44350
by: Bruce S02/29/2016
Super easy installation. Wobbles around a bit, but that's to be expected. Lost the security pin when I sold my car and now I need a replacement. Hope I can find one. It's almost spring. 238997
Hitch went on quick and easy. No need to drop exhaust. Wiring directions were confusing. Luckily I found a 12-minute video that was great. It saved a lot of time. 267664
by: Scott B07/17/2016
Trailer hitch arrived as scheduled and was a piece of cake to install. eTrailer.com was easy to use and I quickly found what I needed. 272912
Very sturdy design. Fit perfectly without any problems and arrived very fast. I will use etrailer.com for all of my trailering needs 35647
Came quickly and was easy install. Have used several times and has worked without any issues. Very helpful how to videos as well. 150900
by: Mike J12/30/2014
Haven't installed yet, but received the product I ordered in great condition. Looks great. Will comment more once installed. 167336
by: David Juhola12/26/2012
Second time I have bought from E trailer. Another great experience. Installed hitch and wiring harness in 1 hour. Too easy! 61960
Every thing fit as advertised. Your installation video was excellent! My husband was very satisfied with the product. 71264
by: Joe A.01/15/2016
Good product at a good price. It took me about 20 minutes to install and I didn't even need to drop the exhaust ! 235520
so easy to put this item took me 5 minutes to do it no muffler to put down at all 48192
by: ed hunt04/20/2015
It's on and looks good. Will not be used for a few months, probably. Thanks 186849
by: Rose A07/22/2012
Product as advertised went on in less than 30 minutes good price too! 48919
by: Bruce S06/07/2016
Good price, good product; what else do you need to know. 258547
Excelently made and fit . 63965
Ask the Experts about this Draw-Tite Trailer Hitch
Do you have a question about this Trailer Hitch?
At etrailer.com we guarantee:
Highest quality trailer hitch for the best price.
Real product know-how.
Most detailed, accurate trailer hitch information available.
Information for this part was:
Installations, made easy.
Personalized service for life.
Trusted since 1946.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.