Videos are provided As a guide only. Refer To manufacturer
installation instructions And specs For complete information.
Custom Fit Product
Shipping Weight: 34 pounds
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
2003 - 2009 Kia Sorento
Video of Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
Videos are provided As a guide only. Refer To manufacturer
installation instructions And specs For complete information.
Today on our 2008 Kia Sorento we'll be installing the Draw-Tite hitch, part number 75516. This is what our hitch will look like once it's installed. Next we'll go ahead and give you a couple of measurements to assist your selecting accessories for your new hitch such as a ball mount, bike rack or cargo carrier.The center of the hitch pin hole is even with the outermost edge of the bumper. The top of the receiver tube opening to the ground is 14 inches. Now we'll go ahead with installation. To begin our install we'll first point out the attachment points.
We'll have a total of four attachment points, two in each frame rail. These attachment points will be weld nuts built into the frame by the manufacturer.We're going to go ahead and remove the rubber isolator from the muffler metal hanger to give us some more flexibility with the exhaust to make it easier to access these weld nuts. To remove the rubber isolator we'll spray it down with some spray lubricant and then use our pry bar to remove the rubber isolator from the metal hanger.With that out of the way we'll need to go ahead and prepare the weld nuts. Using some spray lubricant and a half inch nylon tool brush, part number 814092 we're going to go ahead and thoroughly clean out those threads. Note in extreme cases it may be necessary to use a thread tip to clean out the excess rust and dirt built up.With the hole cleaned out we'll go ahead and take one of the new fasteners and thread it into the weld nut to make sure it'll go nice and easily.
With that done we're now ready to go ahead and install the hitch. We'll be securing the hitch with the new 12mm bolt and half inch conical tooth washer-the teeth of the washer will face the hitch.We'll bring the driver's side up over the exhaust and then on the passenger side up to the frame rail. We'll install the passenger side fasteners finger tight and then move over to the driver's side and repeat the same process. With all four bolts in place we can go ahead and tighten them down. Next we'll torque to specifications as indicated in the instructions.
Now with our hitch secured and torqued to specifications we can go ahead and reinstall the exhaust and that we'll complete our install of the Draw-Tite Hitch, part number 75516 on our 2008 Kia Sorento.
Average Customer Rating: 4.9 out of 5 stars (51 Customer Reviews)Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
by: Marc G.04/29/2014
This is a excellent place to do business , the products are of high quality , the service and speedy delivery as well as follow up communications are all elementary .... I have done business before with e-trailer and I would highly recommend this company to all my friends and those I come in contact with . Keep up the excellent customer service and products you guys rock !! 127919
by: Rich B.04/11/2014
I think the product is an excellent choice for anyone to use as a trailer hitch. It was not as easy as I thought to put on but I got it on o.k. . I can honestly say it does take two people to do the job if you don't have a lift as shown in your video. The package was delivered in bad shape, rips. crushed areas, and the whole top of the box was completely open which someone had to tape up with packaging tape. Fortunately there was no damage but I do recommened that you should package this item in a stronger box and wrap the item with some sort of protection such as bubble wrap. I was surprised that it was not protected it any way shape or form, it was just put in a box to flop around. I can understand how the box got ripped and opened. The corners of the end plates were protruding out of the box. Poor packing I think you could do better than that. Other than that I am satisfied. 124728
by: Randall D.05/03/2012
The package was waiting on my doorstep when I came home today. A leisurely 45 minutes later the hitch is mounted… without a hitch (pun intended). Installation is extremely simple and straightforward. Just drop the spare tire (for a little extra working room) and mount the hitch. I do recommend a wire brush and lubricant to clean the threaded holes in the vehicle frame. Also, try running the bolts into the holes before mounting to be sure they are clean. And you might want an extra hand to lift the hitch into position. I should have, but I couldn’t wait. Now I’m off to pick up the fishing boat! 39311
by: Mickey S03/24/2014
Communication was great during shipping, products arrived on time and in a very short time. products appear un damaged and in tact. has been too cold to install items. I would definitely order from e trailer again 121987
by: Denis H.10/17/2011
Installed this Draw-Tite Max-Frame hitch in about 30 minutes on my 2007 Kia Sorento. The fact that it mounts above the muffler is a big plus. 25690
by: Dan H.03/12/2014
My new hitch feels strong and dependable. Service is great, I would send any family or friend to etrailer.com. I ordered the wrong wire harness and the rep I spoke with sent a new and correct one out immediately. I added a light bar with left and right turn signal and brake light for added safety and visibility when not towing. 120383
by: Rod P.05/17/2015
My DrawTite hitch arrived in good shape except for a few little scratches that I had to paint ! Take my advice, either get a friend to help you with installation or let a shop do it !! This is definitely not a one person install !! Once the hitch is finally between the frame rails, it bolts right up !! The wiring harness that I also ordered was really easy to plug in and works great !! The products that Etrailer.com sells are top notch but beware, some of these hitches are pretty heavy so get some help !! 193745
by: Dennis S04/12/2013
I got this hitch to go on my 2008 Kia Sorrento and it went on very easily. The bolt holes were perfectly aligned and a little W D40 in the holes and start the bolts before putting hitch in place like the install video suggests and took me about 20 minutes. I am 68 years old and the job was a piece of cake. I like the looks of the hitch on the car, and if there were a complaint it could have been about 1 inch shorter so you could not bump it when the hitch insert was out of it. Very good product!!! 75524
by: Nick D.07/16/2012
The item from etrailer shipped out the same day. I ordered on Monday and received Wednesday. Amazing turnaround time. The hitch itself was a little more difficult to install than I anticipated. It took a few attempts to get the bolts over the KIA's muffler properly aligned. I suggest having someone around to help with the install... even if it is just to help balance the hitch until the bolts are in position. Overall I am very satisfied with the product and etrailer. 48072
Shipment was fast ! I put it on in about 30 minutes.it fits perfect. 126455
by: Don L.07/24/2012
I had the hitch installed onto my 2007 Kia Sorento in less than 30 minutes, the design of the hitch made everything work as if it had come from the Kia factory. Bolt holes in the hitch and my Kia were a perfect match, couldn't have asked for anything better, good looking, good quality. Thanks for your how to video and quick shipping, will be doing the wiring next and then pull my new Chrysler Gem car to a demo day to show it off. Thanks: Don L. 49121
by: Jeff Conduff12/17/2011
Product installed just as the video described (Easy) I did not loosen the exhaust mount but used the exhaust to hold up the one end as I bolted the other end (I did it by myself) very easy. Just need a long extension for your socket wrench. Web site is very easy and friendly. Did have one problem when ordering the wiring kit it does not come with the mounting bracket shown in the video that is separate so don't forget it... 28232
by: Alan J01/28/2011
I have been an auto repair tech for over 30 years,and I always expect to have to modify any aftermarket part to get it to fit.I can say that for the first time in a long time I bought a product that fit just like the directions said.The fit and quality are both as good as you would ever want.The trailer wiring harness was of equal quality.I can not thank you enough for selling a product that is as good as advertised. 6336
by: Jon W04/18/2010
One Great Hitch Delivery of my hitch was fast. Installation took less than the required time and for the most part was a breeze. 1 bolt in particular was a little tricky to get torqued, but with the right adapter was a breeze. Looks great and has a very sturdy feel. Loved that I could do this myself and save the $600 dealer quote for a hitch. 2942
by: Denis kerr07/17/2011
The Draw Tite Trailer Hitch for my Kia Sorento was a perfect fit ! easy to install as the instructions said it would be. I actually installed it on my own in less than an hour. Shipping was extremely fast.....ordered on Tuesday morning, and it was at my doorstep on Thursday evening. All in all, I would highly recommend etrailer.com 19578
Very easy to install took only me twenty minutes to bolt down. Great product. Shipping was on time but one end of hitch was sticking out of box. A few scraps but hard to see for they were up by the bolts. Wish everything was so easy to install. Thanks have done a few cars for others and almost as easy. Bill 75466
by: Steve S.07/06/2012
This Trailer Hitch Receiver, was just what I had expected from reading the reviews like this one. The Trailer Hitch Receiver fit perfectly and bolted up with ease. The bolts fit the Frame Inserts and the holes watched the Frame Inserts. I am really happy with this product. Thank you eTrailer.com. 47026
by: Dobby M.06/20/2011
The product was better built than I expected and installation was a breeze! Shipping was as fast as lightening and the free shipping was a bonus. I would recommend if anyone was in the market for a hitch, etrailer is the only place to go! Thanks etrailer for a great product and awesome service!! 17425
by: Brett SLC Ut07/30/2014
Very accurate as far as product description. Easy to install. Fast shipping and great price. The Kia dealer wanted to charge me almost $400 for a hitch and installation. Hardest part was cleaning out the screw holes on my car frame. Once I got them done install took about 20 minutes. 143399
by: Brennan M.11/03/2012
I was very pleased with this company! I received my order in 2 days and it was exactly what i ordered and fit my truck perfect. The install only took about 20 minutes and i will be using this company again. Thanks 58770
hitch is perfect for my 2008 kis sorento looks great mounted. took me more than 20 minutes because i mounted it my self. if i were you I get help . well built product and fast and friendly service. love it. 29525
by: Forrest P11/14/2013
The Draw Tite Hitch yesterday, a couple of days before I expected it. I was very please at the quality of the construction of the hitch. I have not install it yet, maybe later today, if all goes well. 107332
by: David S.04/25/2012
Hitch was very easy to install, but would definately recommend a second person to help hold it up while installing. All I had to do was drop the spare and was able to torque everything no problem. 38266
Great product. Fits perfect. This company was a pleasure to order from. Amazing customer service and care you don't find these days. I will definitely order more parts from etrailer.com. 237591
Fantastic Hitch I searched the interent for the perfect hitch to fit my 08 Kia Sorento, I love this hitch. very Easy to instal, quality made, and well worth the money, highly recommend!!! 1786
by: Les Bricker03/19/2012
The product was perfect. The on-line video explained the installation process for the receptacle and wiring perfectly. The order was delivered when promised, in perfect condition. 34314
by: Don L05/06/2015
The video on how to install made it look easy enough to try. turned out to be as easy as the video indicated. Thanks. I am very pleased with how sturdy the hitch is too. 191037
by: Rick S06/28/2013
received this item within a week of ordering. excellent quality, heavy duty and a perfect fit. I would highly recommend and I will look to etrailer for any future needs 86599
by: Tom E.04/26/2013
Received trailer hitch and wire harness the other day.Everything was correct and looked great. Order was on time and in great shape.Thanks again etrailer. 78035
by: David S.07/16/2012
The hitch was very easy to install. I did need help to hold the hitch up while I put the bolts in, but other than that I was able to do it all by myself! 48063
by: Dan B.08/16/2012
This trailer hitch receiver for my 2004 Kia Sorento went in with no problems. I used a jack to lift and hole in place while I got the bolts started. 51993
Hitch bolted right up, and works great. Easy install, solid unit, great price. On top of that the service from trailers was outstanding! Thanks! 140226
by: robert c.10/03/2013
packaged great, arrived prompt, easy to install. installed in less than 15 minutes on my kia sorrento. would recommend this product and vendor! 102496
by: Bill G.02/07/2011
Excellent service. Order arrived in 2 days. Installation was easy, just as described on video site. Would recommend this company to everyone !! 6740
by: Jon Neal08/13/2012
This trailer hitch was exactly as said on the site. No surprises at all. Got it in 3 days. Great service. Loved the instructional video. 51596
I was shock to see my package so soon. Your the best. Don't change a thing. Do you deliver frozen turkeys? lol Happy Holidays. 107741
by: Christopher B11/20/2012
Great quality all around. Perfect fit. Great instructions online. Saved hundreds buying here and installing myself. 59807
Quick and easy. Only took me 20 minutes to install. Etrailer.com had it shipped the same day it was ordered. 42518
by: Cecil Smith07/22/2011
Product was delivered on time and is the correct product. etrailer.com will have my return business. 19861
Great product Delivery was fast and it installed in 15 min. The wire package was just at easy. 651
by: Paul Rocket09/24/2016
The wiring Harness worked great, and the trailer receiver was an EXACT fit - amazinng... 299580
Shawn B. Is the best customer service representative ever! Amazing fit on the hitch too. 255072
by: Robert O03/13/2013
Quick delivery. Mounted perfectly to my 2007 Kia sorrento took ten minutes Awesome. 70537
great product easy to install, much cheaper than one from the dealer. seemed very solid. 2419
Hitch is great. But received wrong bolts. Good think i keep a bunch of extras around. 44447
Delivered to door and installed easily using instructions and minimal tools required. 35421
by: David Rahall05/27/2014
Hitch was made very well, very sturdy, even better than I expected. 132720
by: Bob Skaggs05/03/2013
Easiest Hitch I ever installed. And the Wiring was so simple. 78784
by: Kat S04/22/2014
Great product and Excellent Service! etrailer is the best. 126419
by: Gabe oneal08/08/2012
Looks good I just haven't put it on. 51031
Ask the Experts about this Draw-Tite Trailer Hitch
At etrailer.com we guarantee:
Highest quality trailer hitch for the best price.
Real product know-how.
Most detailed, accurate trailer hitch information available.
Information for this part was:
Installations, made easy.
Personalized service for life.
Trusted since 1946.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.