Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Draw-Tite Trailer Hitch - 75382

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

Features:

• Custom fit is designed specifically for your vehicle
• Computer-aided, fully welded steel construction ensures strength and durability
• Tested Tough - safety and reliability criteria exceed industry standards
• Easy, bolt-on installation - no welding required
  • Complete hardware kit and installation instructions included
• Lifetime technical support from the experts at etrailer.com
• Black powder coat finish covers e-coat base for superior rust protection
• Sturdy, square-tube design
• Ball mount, pin and clip sold separately
• Made in USA

Specs:

• Receiver opening: 2" x 2"
• Rating: Class III
  • Maximum gross trailer weight: 5,000 lbs
    • Maximum GTW when used with weight distribution: 5,000 lbs
  • Maximum tongue weight: 500 lbs
    • Maximum TW when used with weight distribution: 500 lbs
• Limited lifetime warranty

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.

Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.

In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.

etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

75382 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame

This Product Fits The Following Vehicles

2006 - 2010 Hummer H3 without Factory Hitch

Customers Who Purchased This Trailer Hitch Also Bought...

Ball Mount 3/4" Rise or 2" Drop, 7,500 lbs $17.20

Pin and Clip For Class III, IV and V Trailer Hitch Receiver $5.16

Wire Frame Clip $0.17

Hummer - Trailer Hitch Receiver Cover for 2" Trailer Hitches $14.99

12" Car and Trailer End Loop $3.70

Ask the Experts about this Draw-Tite Trailer Hitch
Do you have a question about this Trailer Hitch?

• Does Bumper Need To Be Trimmed On Hummer H3 When Installing The Draw-Tite Class III Hitch, # 75382
  
• There is no cutting or trimming of the bumper on the Hummer H3 when installing the Draw-Tite Class III Trailer Hitch, # 75382. The installation on your Hummer H3 is a very simple bolt-on application. The hardest part might be lowering the exhaust for ease of installation. I am sending a link to the installation instructions for the Draw-Tite Class III Trailer Hitch, # 75382. If you will be towing, you will need the Draw-Tite Ball Mount, # 2923, and the Pin and Clip, # PC3. You will also ne
  view full answer...


• Will Draw-Tite Class III, 2 Inch Trailer Hitch, # 75382, Fit a 2010 Hummer H3
  
• According to Draw-Tite, Trailer Hitch, # 75382, will fit your 2010 Hummer H3. The hitch has been carried over for the 2010 model year according to the manufacturer. I have included a link to the installation instructions for reference. To complete your towing set up, the recommended ball mount is # 2923 and pin and clip # PC3. You can use ball # 19260 (1-7/8 inch diameter), # 19247 (2 inch diameter), or # 19287 (2-5/16 inch diameter).
  view full answer...