Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Draw-Tite Trailer Hitch - 75123

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

Features:

• Custom fit is designed specifically for your vehicle
• Computer-aided, fully welded steel construction ensures strength and durability
• Tested Tough - safety and reliability criteria exceed industry standards
• Easy, bolt-on installation - no welding required
  • Complete hardware kit and installation instructions included
• Lifetime technical support from the experts at etrailer.com
• Black powder coat finish covers e-coat base for superior rust protection
• Sturdy, square-tube design
• Ball mount, pin and clip sold separately
• Made in USA

Specs:

• Receiver opening: 2" x 2"
• Rating: Class III
  • Maximum gross trailer weight: 3,500 lbs
    • Maximum GTW when used with weight distribution: 6,000 lbs
  • Maximum tongue weight: 350 lbs
    • Maximum TW when used with weight distribution: 600 lbs
• Limited lifetime warranty

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.

Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.

In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.

etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

75123 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame

This Product Fits The Following Vehicles

1991 - 1994 Oldsmobile Bravada

1991 - 1991 Chevrolet S-10 Blazer 2 Door models

1991 - 1991 GMC S-15 Jimmy 2 Door models

1991 - 1991 Chevrolet S-10 Blazer 4 Door models

1991 - 1991 GMC S-15 Jimmy 4 Door models

1992 - 1994 GMC Jimmy All Models

1983 - 1994 Chevrolet S-10 Blazer All Models

1983 - 1990 GMC S-15 Jimmy All Models

Customers Who Purchased This Trailer Hitch Also Bought...

Pin and Clip For Class III, IV and V Trailer Hitch Receiver $5.16

Hitch Ball with 1-7/8" Diameter and Medium Shank, 2,000 lbs GTW - Chrome $7.49

Ball Mount 2-3/4" Rise or 4" Drop - 7,500 lbs $21.17

Replacement U-Bolt w/Nuts for 2,000-lb, Round Trailer Axles - 3/8" Diameter $4.09

4 and 5-Flat Trailer Connector Mounting Box $7.99

Ask the Experts about this Draw-Tite Trailer Hitch
Do you have a question about this Trailer Hitch?

• Distance Between Mounting Brackets on Trailer Hitch 75123 for a 1993 Chevy S-10 Blazer
  
• I went out to the warehouse and measured the distance between the mounting flanges, inside to inside, on hitch # 75123 and it was 40 inches. If you look at the instructions which are linked for you this hitch mounts to the outside of the frame rails. Measure the outside to outside distance between the frame rails to determine if it is a match. This hitch is custom fit for a 1993 Chevy S-10 Blazer so barring any unique features on the vehicle there should be no fit issues. If you plan on doing
  view full answer...