Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"

Draw-Tite Trailer Hitch - 41938

Specially designed to meet your heavy-duty towing needs, this fully welded, corrosion-resistant vehicle trailer hitch receiver features Draw-Tite's Tested Tough guarantee, ensuring performance that exceeds industry standards.

Features:

• Custom fit is designed specifically for your vehicle
• Computer-aided, fully welded steel construction ensures strength and durability
• Tested Tough - safety and reliability criteria exceed industry standards
• Easy, bolt-on installation - no welding required
  • Complete hardware kit and installation instructions included
• Lifetime technical support from the experts at etrailer.com
• Black powder coat finish covers e-coat base for superior rust protection
• Sturdy, square-tube design
• Ball mount, pin and clip sold separately
• Made in USA

Specs:

• Receiver opening: 2" x 2"
• Rating: Class IV
  • Maximum gross trailer weight: 12,000 lbs
    • Maximum GTW when used with weight distribution: 15,000 lbs
  • Maximum tongue weight: 1,200 lbs
    • Maximum TW when used with weight distribution: 1,500 lbs
• Limited lifetime warranty

NOTE: Vehicle's must have 34" spacing and a minimum of 19" from the end of the frame rail to the spring shackle bracket.

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.

Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.

In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.

etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

41938 Draw-Tite Class IV Trailer Hitch Receiver - Ultra Frame

This Product Fits The Following Vehicles

2001 - 2013 GMC Sierra 3500 Cab and Chassis

2007 - 2007 GMC Sierra Classic 3500 Cab and Chassis

2007 - 2007 GMC Sierra New Body 3500 Cab and Chassis

2001 - 2013 Chevrolet Silverado 3500 Cab and Chassis

2007 - 2007 Chevrolet Silverado Classic 3500 Cab and Chassis

2007 - 2007 Chevrolet Silverado New Body 3500 Cab and Chassis

1963 - 1980 Chevrolet C/K Series Pickup 8 ft. Bed with Standard Bumper

1963 - 1980 GMC C/K Series Pickup 8 ft. Bed with Standard Bumper

1981 - 1987 Chevrolet C/K Series Pickup 8 ft. Bed with Standard or Step Bumper

1981 - 1987 GMC C/K Series Pickup 8 ft. Bed with Standard or Step Bumper

1985 - 2000 Chevrolet C/K Series Pickup Cab and Chassis

1985 - 2000 GMC C/K Series Pickup Cab and Chassis

1999 - 2000 Ford F-250 and F-350 Super Duty Cab and Chassis

1988 - 1991 Chevrolet C/K Series Pickup Pickup, with Standard or Step Bumper

1988 - 1991 GMC C/K Series Pickup Pickup, with Standard or Step Bumper

Customers Who Purchased This Trailer Hitch Also Bought...

Jacketed 2 Wire, 10 Gauge, Brake Wire - per Foot $1.21

Master Lock EZ Access Swivel Head Trailer Hitch Receiver Lock for 2" Trailer Hitches $19.95

Universal Installation Kit forTrailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires $64.80

Ask the Experts about this Draw-Tite Trailer Hitch
Do you have a question about this Trailer Hitch?

• Interference with Spare Tire When Installing Draw-Tite Class V Receiver on 1974 Chevy Pick Up
  
• I have looked at the instructions for the Draw-Tite Ultra Frame Receiver hitch, which state that the spare tire carrier will need to be relocated or modified to prevent the spare tire from interfering with the hitch. I will provide a link to the instructions below.
  view full answer...


• Will Draw-Tite Trailer Hitch, # 41938 Fit a 1986 Chevy K Series Pickup Truck
  
• On the Draw-Tite Trailer Hitch, # 41938, the 8 bolts used to attach the hitch each go into the frame rails on the truck. When I spoke with my contact at Draw-Tite he gave a much more clear description of what you will need for this hitch to mount to your truck. Basically, the hitch is 19 inches long. If you measure from the end of the frame rails at the rear of the truck towards the front, you will need at least 19 inches with nothing in the way in order for the hitch to fit. I have included
  view full answer...


• Trailer Hitch, Ball Mount, Ball, and Wiring Recommendations for a 2006 Toyota Tacoma
  
• We do have several trailer hitch available for the 2006 Toyota Tacoma, but # 41938 will not fit. For your truck, I recommend the Draw-Tite Trailer Hitch, # 75236. I have included a link to the installation details and a video showing a typical installation for you to view. The recommended ball mount is # 2923, and you can use pin and clip # PC3. For a ball, you can use # 19260 (1-7/8 inch diameter), # 19247 (2 inch diameter), or # 19287 (2-5/16 inch diameter). For Trailer wiring, use T-One Co
  view full answer...