This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately. Lowest Prices for the best trailer hitch from Draw-Tite. Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" part number 36425 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
$138.95
Select Your Vehicle

View Cart


Trailer Hitch > Custom Fit Hitch > Class II > 1-1/4 Inch Hitch > Visible Cross Tube > 300 lbs TW > 3500 lbs GTW > Draw-Tite

Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Draw-Tite Trailer Hitch

(25 reviews)


Code:   36425

Retail:$238.45

Price:$138.95


Custom Fit Product

Shipping Special

Shipping Weight: 25 pounds

Quantity: 






Draw-Tite Trailer Hitch - 36425

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
    • Bolt leader is required for installation (sold separately)
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Drawbar sold separately - pin and clip included


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class II
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 300 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



36425 Draw-Tite Class 2 Trailer Hitch Receiver

90158 Hidden Hitch Class 2 Trailer Hitch Receiver



36425 Installation InstructionsInstallation Details 36425 Installation instructions

This Product Fits The Following Vehicles

2001 - 2005 Pontiac Aztek All Models

2002 - 2007 Buick Rendezvous All Models




Video of Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"


Videos are provided As a guide only. Refer To manufacturer
installation instructions And specs For complete information.




Video Transcript for Trailer Hitch Installation - 2004 Buick Rendezvous

Today on this 2004 Buick Rendezvous we will be installing Draw-Tite hitch part number 36425. This installation will also apply for Hidden Hitch part number 90158. We are underneath the vehicle near the bumper, we are looking at the driver side frame rail. As you can see we have two large oblong holes at the end of the frame rail and we are going to be using both of those as attaching points for our trailer hitch. We will be placing carriage bolts and blocks up inside the frame and pulling it back down into position for both of those locations. That is going to be the same on the passenger side as well. If you notice further rearward we have this lip that is attaching the body to the bumper. We are going to be drilling four holes, two per side, to attach the trailer hitch to as well. What we want to do first is put the hardware into the frame, get the hitch up into position, and we will use the hitch as a template to drill those holes out. 00:47

We are going to be using the 1/2 inch carriage bolt along with the one by three inch block at all four of the locations. To get the hardware into position we are going to be using the larger rear most hole as our access hole. What I am going to be using is the bolt leader which we offer at Etrailer.com. This one is 1/2 inch to accommodate the 1/2 inch carriage bolt. Basically that is going to help us pull our hardware into place. We are going to take and feed the bolt leader up through our forward most attaching point and back out the access hole. Next take the block and feed it on to our bolt leader followed by our carriage bolt which we are going to thread the bolt leader on to the end of the carriage bolt. Feed the block up into the frame followed by the carriage bolt and then use the bolt leader to pull it down into position. 01:34

We are going to be using the 1/2 inch carriage bolt along with the one by three inch block at all four of the locations. To get the hardware into position we are going to be using the larger rear most hole as our access hole. What I am going to be using is the bolt leader which we offer at Etrailer.com. This one is 1/2 inch to accommodate the 1/2 inch carriage bolt. Basically that is going to help us pull our hardware into place. We are going to take and feed the bolt leader up through our forward most attaching point and back out the access hole. Next take the block and feed it on to our bolt leader followed by our carriage bolt which we are going to thread the bolt leader on to the end of the carriage bolt. Feed the block up into the frame followed by the carriage bolt and then use the bolt leader to pull it down into position. 01:34

With the bolts snugged up we can drill the holes out using the 3/8 drill bit. With the holes drilled we want to take our 3/ 8 bolts along with our flat washer and them from the bumper side of the vehicles end panel in towards the front of the vehicle. We are going to attach on the other side using the lock washer and hex nut. With those in place we can start torquing the bolts down. I am going to torque the bolts in the end panels first and then we will go back and torque the bolts at the bottom of the frame last. You want to check with the directions to verify the appropriate torque rating for each of the bolts. Now that we have got our hitch installed lets give you a couple of final installed dimensions. From the ground to the top of the receiver tube opening is going to run 13 inches and from the center of the pin hole to clear the rear edge of the bumper is going to be approximately seven inches. Just make sure that if you lowered the exhaust off its rear most hanger earlier that you put that back up. That will conclude the installation of Draw-Tite part number 36425 on a 2004 Buick Rendezvous.


Customer Reviews

Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" - 36425

Average Customer Rating:  4.8 out of 5 stars   (25 Customer Reviews)


This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


- 36425

by: Johnny G01/17/2011

2005 Buick Rendezvous


Great Fit! I recently purchased a Trailer Hitch and wiring harness for my 2005 Buick Rendezous. I received it within about three days and it fit perfect. The Instructions gave the installation time as being approx. 55 minutes and that was pretty accurate. The wiring harness plugged right in and I was ready to tow. I am pleased with the price I paid as well as the speed of delivery and the product itself. Thanks 5608



- 36425

by: Tim Zielinski07/12/2015


Was relatively easy to install the hitch onto my vehicle. Received hitch in 4 days from date of order! Great customer service! 211121


Comments

Just fine!

Tim Z - 07/11/2016

19307



- 36425

by: Bruce S03/30/2011


This hitch is all it's advertised as and then some. The delivery was very fast and it was packaged well. The hitch slid into place effortlessly without having to move the exhaust pipe and the holes matched up perfectly. The only problem was drilling the holes. The forward area was too confined to use a regular drill motor and 3/8 drill so I centered drilled it from there and then finished drilling the holes from the rear of the car. 10683



- 36425

by: Sam S03/20/2011


I couldn't be happier with this product. This is the second hitch I've put on a car and watching the video made it so much easier to install. Free shipping makes it an even better deal. A winning situation everyway you look at it. I'm extremely pleased with the quality, too. Being retired from aircraft maintenance in the Air Force, I'm extremely picky when it comes to materials. Thank you very much. 9888



- 36425

by: Bob K.03/21/2011


I order the hitch to tow a small sailboat, and it worked out just fine. I ran an auto parts and tire store for 12 years and have never seen or heard of the wire fish system. I was forced to make my own because I didn't watch the install video before I ordered. If you order the hitch, order the fish kit at the same time. 9957



- 36425

by: Phil06/21/2012


Great product, fast shipping, easy installation - the video was the key - I watched it a few times and then went to work. It took me about an hour or so. Do Not pay to have one installed - check out the installation videos and you will see how easy it is. 45076



- 36425

by: Edward D.04/20/2012


Arrived in good time and in good condition. Well packaged. Took less than 1hr to install, watched video , followed directions, it was a snap. The bolt leader was a life saver. Well worth the $1.05 I spent on it.I will use etrailer again. Thank you. 37876



- 36425

by: Amy K08/19/2011


It was easy to install even for a girl!!! Drilling the holes in a tight space was the most difficult part. The do it yourself video really helped. It is a great product and shippment was very fast. I would order from Etrailer again. 22286



- 36425

by: MATT L.03/20/2012


Exactly as advertised! Fairly simple installation I just wish that they would have supplied a wire lead to make the bolt installation a lot easier. I needed to go to the hardware store to buy some metal wire to make my own. 34436



- 36425

by: Edward R.09/17/2012


Hitch mounted up perfectly, took about an hour to install with basic hand tools and a drill. This is the second hitch I have purchased here and I am very pleased with the products. Oh, and thanks for the free shipping. 54931



- 36425

by: joseph s.08/31/2011


got just what i wanted and quickly. installed it my self that day in one hour. (faster if i could find my drill faster.) would highly recommend to anybody. 23304



- 36425

by: Paul R07/21/2011


The hitch arrived quickly and was very easy to mount. I am very satisfied with this purchase.The free shipping was the icing on the cake. 19816



- 36425

by: Jeff G.08/03/2011


The video from etrailer on how to install the trailer hitch receiver was great. Installation went great and I am very pleased. 20974



- 36425

by: Les m08/17/2012


Very easy installing hitch. I used a string tie to thread bolt tru frame. Works great. Very happy with product! 52109



- 36425

by: Les m08/17/2012


Very easy installing hitch. I used a string tie to thread bolt tru frame. Works great. Very happy with product! 52110



- 36425

by: Scotto10/10/2011


This hitch was well designed and manufactured! I installed this by myself with minimal shop tools. Scotto 25328



- 36425

by: Ernesto B.05/10/2012


Order received on time. Extremely easy to install, will get a chance to use it in the next 2 weeks! 39796



- 36425

by: Steve Hammond01/05/2012


The products can very fast. It was well protected. A very good price. I am happy with my order. 29160



- 36425

by: bobby r07/05/2013


the product matched perfectly. ordered on a sunday and shipped the same day. great company!! 87763



- 36425

by: joe l03/22/2016


hitch attached easy and were done with the install in less time then estimated. works great 241228



- 36425

by: Jim E.05/18/2011


Great site. Easy to find the right hitch. Ordered it and it arrived in a few days. Thanks! 14703



- 36425

by: John B01/20/2012


fast, fast, fast delivery! Great transaction. Will purchase from E-trailer again. 30038



- 36425

by: Tom04/25/2012


Shipped promptly. Great followup! Installed without a hitch!!! 38288



- 36425

by: Sam Zeller01/12/2011


Delivery Super fast order fill and shipping. Thanks, Sam 5390



- 36425

by: Paul W.02/24/2012


So completely happy with this company. Will use again. 32427

25
25


Ask the Experts about this Draw-Tite Trailer Hitch


  • What Vehicles does Draw Tite Hitch Part # 36425 Fit
  • Draw-Tite hitch, part # 36425, fits 2001-2005 Pontiac Azteks all models. It also fits 2002-2007 Buick Rendezvous all models. If you are looking for a hitch for your 2006 Toyota RAV4 you could check out the Draw-Tite part # 75235. This is a Class III, 2 inch hitch. Or the # 36588, which is a Class II, 1-1/4 hitch.
    view full answer...

  • Is Hardware and Bolt Leader Included with Draw-Tite Class II Receiver Part # 36425
  • The Draw-Tite Class II Receiver, part # 36425 includes all the hardware necessary for installation. The bolt leader or fish wire is not included and is available separately as part # 80101-1. I would strongly recommend getting one or two of the fish wires, as they really are a big help during the installation. If you go to the product description for the Draw-Tite # 36425, the fourth small photo under the large main photo shows the actual hardware included with the hitch. The photo will...
    view full answer...

  • Will Holes Line Up When Replacing Class l Hitch With Class ll On 2006 Buick Rendezvous
  • I spoke with my contact at Draw-Tite about the hitch you have on your 2006 Buick Rendezvous. They told me if the Class ll hitch you currently have installed is part # 36425, the Class lll Draw-Tite hitch, part # 75430 should line up the same. They told me the only difference is the heavier metal and the receiver opening so you should be good to go. I have attached a link to an installation video for this hitch you can check out on a 2007 Buick Rendezvous. Although a different year,...
    view full answer...







Why etrailer.com?

At etrailer.com we guarantee:


Highest quality trailer hitch for the best price.


Real product know-how.

  • We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. This helps you get the right product the first time.
  • Every day our teams test, review, assemble and install our products. Our modern installation facilities allow our expert installers and customer service representatives to actually install and use the items we sell, so you can get real advice, from a real person who has the knowledge and expertise needed to solve your problem.

Most detailed, accurate trailer hitch information available.

  • Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.

Information for this part was:

Test Fit:
Joe V
Expert Research:
Michael L
Video by:
Andrew K
Written by:
Lindsey S
Expert Research:
Patrick B
Updated by:
Laura H
Video Edited:
Dustin K
Test Fit:
Shane T
Updated by:
Amanda M

Installations, made easy.

  • We love helping people.
  • We have the most highly trained customer service, hands-on experience, step by step videos and installation instructions. We are prepared to answer any question, give advice, or troubleshoot any problem you come across.

Fast shipping.


Personalized service for life.

  • We provide one-on-one, personalized service from the ordering process through the life of your product.

Trusted since 1946.

  • We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.

Info for this part was:


Test Fit:
Joe V

Expert Research:
Michael L

Video by:
Andrew K

Written by:
Lindsey S

Expert Research:
Patrick B

Updated by:
Laura H

Video Edited:
Dustin K

Test Fit:
Shane T

Updated by:
Amanda M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.







Stay Connected


Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email






etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com