Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Curt Trailer Hitch Receiver w/ Euro Drawbar - 1-7/8" Ball - Custom Fit - Class I - 1-1/4"

C113151

Retail:$303.65

Price:$164.26

Curt Trailer Hitch Receiver w/ Euro Drawbar - 2" Ball - Custom Fit - Class I - 1-1/4"

C113152

Retail:$303.65

Price:$164.26

Curt Trailer Hitch Receiver with Standard Drawbar - Custom Fit - Class I - 1-1/4"

C113153

Retail:$283.34

Price:$161.26

Curt Trailer Hitch - C11315

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.

Features:

• Custom fit is designed specifically for your vehicle
• Precision, robotic welding maximizes strength and improves fit
• Bolt-on installation - no welding required
  • Complete hardware kit and installation instructions included
• Lifetime technical support from the experts at etrailer.com
• Gloss black powder coat finish over protective base coat offers superior rust resistance
• Sturdy, square-tube design
• Drawbar sold separately - pin and clip included
• Made in the USA

Specs:

• Receiver opening: 1-1/4" x 1-1/4"
• Rating: Class I
  • Maximum gross trailer weight: 2,000 lbs
  • Maximum tongue weight: 200 lbs
• Limited lifetime warranty

Note: All non-trailer loads - bike racks, cargo carriers and so forth - should be supported with stabilizing straps. Failure to properly support these loads will void your hitch warranty from Curt.

etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

11315 Curt Class 1 Trailer Hitch Receiver

This Product Fits The Following Vehicles

2008 - 2011 Subaru Impreza Hatchback with Single Exhaust

2008 - 2011 Subaru Outback Wagon Sport with Single Exhaust

Customers Who Purchased This Trailer Hitch Also Bought...

Rubber Tube Cover 1-1/4" $4.49

Hitch Ball with 1-7/8" Diameter and Short Shank, 2000 lbs GTW - Chrome $6.49

Hitch Ball with 2" Diameter and Short Shank, 3,500 lbs GTW - Chrome $6.49

Curt Rubber Tube Cover - 1-1/4" $2.91

Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver $49.95

Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - C11315

Average Customer Rating:  4.5 out of 5 stars   (6 Customer Reviews)

- C11315

by: Keny M.09/19/2011

Is this review helpful?

Excellent trailer hitch, and relatively easy to install with a few caveats: 1. The fishing of the bolts through the frame is a little hair raising at times, and would have been helped by having the car jacked up. 2. It is more than a 50 minute install and requires more than one person to lift and hold the pretty heavy (see solid) bumper into position. 3. Bolts are pretty tight and require nimble hands to fish them in around the exhaust and piping. Otherwise the product performs just as advertised and I am a very happy camper. Great product.24186

comment on this review

Ask your question or add a comment to this product review?

Name: (example: John S.)

Contact email:

* please make sure your email address is correct (should look like name@domain.com)

Comment

Yes, I would like an email notification if someone replies to my comment?   

Click to Enlarge

- C11315

by: Phillip E.05/25/2011

Is this review helpful?

Hitch went on very easily. The only difficult part was re-attaching the exhaust hangers. I was suprised at the weight of the hitch and the build quality appears to be very good.15325

comment on this review

Ask your question or add a comment to this product review?

Name: (example: John S.)

Contact email:

* please make sure your email address is correct (should look like name@domain.com)

Comment

Yes, I would like an email notification if someone replies to my comment?   

- C11315

by: Mike B02/28/2011

Is this review helpful?

Great! 8129

comment on this review

Ask your question or add a comment to this product review?

Name: (example: John S.)

Contact email:

* please make sure your email address is correct (should look like name@domain.com)

Comment

Yes, I would like an email notification if someone replies to my comment?   

- C11315

by: Mark03/30/2013

Is this review helpful?

I am happy with this hitch now that I have it installed. However, it is worth noting that for the 2010 Subaru Impreza (non-wrx), the hitch needs to be installed simultaneously with the muffler, and if the muffler is ever removed the hitch will have to come out. I suspect that other hitches with sides that are more straight down will not have this problem. I have no idea what other vehicles will be like, but suspect they will be the same unless they have a narrower muffler.73468

comment on this review

Ask your question or add a comment to this product review?

Name: (example: John S.)

Contact email:

* please make sure your email address is correct (should look like name@domain.com)

Comment

Yes, I would like an email notification if someone replies to my comment?   

- C11315

by: ED10/09/2012

Is this review helpful?

Great fit and finish, looks great on the 2008 subaru impreza hatchback. Thank you etrailer for great customer service and the videos help a lot when installing. I will order from you guys again!!56795

comment on this review

Ask your question or add a comment to this product review?

Name: (example: John S.)

Contact email:

* please make sure your email address is correct (should look like name@domain.com)

Comment

Yes, I would like an email notification if someone replies to my comment?   

- C11315

by: Ahmet08/01/2011

Is this review helpful?

So far so good. I haven't actually used it yet but it sure looks good. I was planning on doing the installation myself but had no ramps so I had Uhaul install it for $55 - well worth it. I did, however, do all the wiring myself. Took me a few hours but everything went smoothly. 20751

comment on this review

Ask your question or add a comment to this product review?

Name: (example: John S.)

Contact email:

* please make sure your email address is correct (should look like name@domain.com)

Comment

Yes, I would like an email notification if someone replies to my comment?   

Click to Enlarge

Click to Enlarge

Click to Enlarge

Ask the Experts about this Curt Trailer Hitch
Do you have a question about this Trailer Hitch?

• Trailer Hitch and Wiring Recommendation for Subaru Impreza 2008 WRX Hatchback/Wagon
  
• I would recommend the Hidden Hitch Class 1 Trailer Hitch, item # 60893, for your 2008 Subaru Impreza five door Wagon. This hitch comes with the drawbar pin and clip, so all you will need to complete your towing setup is wiring and a hitch ball. All of the hitches available for your vehicle are Class 1 rated and will require some enlargement of access holes to install so there is no real advantage of one over the other. We have the wiring kit your vehicle needs which is the Upgraded Circuit P
  view full answer...


• What Hitch and Wiring will Fit my 2008 Subaru Impreza WRX 4 Door Sedan
  
• In order to determine if it will fit and what wiring is need I need to know what year your WRX is. Hitch 11315 from Curt is designed for 2008-2010 Impreza Wagons, so I doubt it is the right fit for a 4 door WRX.
  view full answer...


• Trailer Hitch Recommendation for a 2010 Subaru Impreza Outback Sport
  
• For your 2010 Subaru Impreza Outback Sport, I recommend the Curt Trailer Hitch, # 11315, that you have referenced, because it has a slightly lower install difficulty than the other available hitches. We base install difficulty on how long it takes to install a hitch and the Curt hitch is a 5 out of 10. This means for a novice it should take about 50 minutes to install the hitch. This is a Class I trailer hitch with a 1-1/4 inch receiver opening capable of 200 pounds tongue weight capacity an
  view full answer...


• Will The Hitch and Wiring For The 2010 Subaru Impreza Also Fit a 2011 Impreza
  
• Yes, as far as installing a hitch and wiring on your 2011 Subaru Impreza, everything remains the same. The hitches and wiring for the 2010 Impreza model carry over and fit the 2011 Impreza. This is the case for the 2009-2011 Subaru Impreza. For a hitch for the 2011 Impreza Wagon, the item you selected, Curt Trailer Hitch, part # 11315, would be a good option. For the sedan models, we have Curt Trailer Hitch # 11317. Both part # 11315 and part # 11317 are Class I 1-1/4 Inch hitches. Both Curt
  view full answer...


• Trailer Hitch Recommendation for a 2011 Subaru Outback Towing a 2,000 Pound Trailer and 3 Bikes
  
• Based on what you want to use a trailer hitch for on your 2011 Subaru Outback Wagon, the ideal hitch for you would be a Class II trailer hitch, specifically the Hidden Hitch, # 90208. One thing I would add about the hitch weights is that the shipping weight includes the weight of the packaging materials. Some of the hitches that are oddly shaped may require more packing material making the shipping weight higher. The actual weight of the hitches will be a few pounds lighter. With that said, I
  view full answer...


• Trailer Hitch Recommendations for a 2011 Subaru Outback Wagon
  
• There are some Class II trailer hitches available for the 2010 Subaru Outback Wagon, but no Class I trailer hitches. A Class II trailer hitch still has a 1-1/4 inch receiver like a Class I, but you will have a higher capacity and more accessory options. If weight of the hitch is an issue, a Class III, # 87568, weighs less at 37 pounds, than a Class II, # 90208, at 39 pounds. Honestly, I would go with a Class III for several reasons. First, you never know what you may want to tow or carry and
  view full answer...


• What is the Recommended Ball Mount for a 2013 Subaru Outback Wagon
  
• You will not want to drill any holes in the ball mount shank or the hitch itself. This will void the warranty and it can weaken the metal and make the capacity unknown. The best thing you can do is get a ball mount that has the length you need. There is no set length it has to be. Provided that it clears the rear of the vehicle and is not excessively extended (varies depending on the vehicle, hitch, and tongue weight of trailer) you can use a 14 inch long ball mount. For the Class III trailer
  view full answer...


• Trailer Hitch Compatibility with a 2011 Subaru Impreza Outback Sport
  
• The reason class II trailer hitches are not recommended for your 2011 Subaru Impreza Outback Sport is because your vehicle has a maximum towing capacity of 1,000 lbs and maximum tongue weight capacity of 200 lbs. I confirmed these capacities with my local Subaru dealer. This information can also be found in your owners manual under the towing section. Trailer hitch manufacturers design trailer hitches for vehicles based on the specs provided by the vehicle manufacturer. Since the maximum towi
  view full answer...


• Trailer Hitch Recommendation for a 2013 Subaru Outback 2.5i Premium
  
• The best solution would be for you to install a 2 inch trailer hitch like # 87568 so there will not be any compatibility issues with your accessories and the hitch. You would not want to use an adapter to go from 1-1/4 to 2 inches because doing so reduces the tongue weight capacity of the hitch by 50 percent. So that 200 pound tongue weight capacity would be cut down to 100 pounds when using the adapter. In terms of ground clearance, on the wagon models the top of the hitch receiver will be r
  view full answer...