Curt Trailer Hitch - C11771
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Drawbar sold separately - pin and clip included
- Made in the USA
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class I
- Maximum gross trailer weight: 2,000 lbs
- Maximum tongue weight: 200 lbs
- Limited lifetime warranty
Note: All non-trailer loads - bike racks, cargo carriers and so forth - should be supported with stabilizing straps. Failure to properly support these loads will void your hitch warranty from Curt.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
11771 Curt Class 1 Trailer Hitch Receiver
This Product Fits The Following Vehicles
2006 - 2006 BMW 3 Series 325xi Sports Wagon
2007 - 2011 BMW 3 Series 328 Sports Wagon
Customers Who Purchased This Trailer Hitch Also Bought...
Ask the Experts about this Curt Trailer Hitch
- Trimming the Fascia to Install a Hitch on a 2007 BMW 335i Sedan
- Curt hitch, part # 11771 will not fit your 2007 BMW 335i, you would need to use the Curt part # 11756 instead. In order to install the Curt Class I Trailer Hitch Receiver with Drawbar, part # 11756, you will not need to trim the fascia on a a007 BMW335i Sedan. I have added a link to the instructions below.
view full answer...
- Is there aTrailer Hitch for a 2007 BMW 328xi Sedan and Options for Carrying a Bike
- There are currently no hitches available for the sedan model 2007 BMW 328xi. What you can do is add a roof rack. You will need 3 items for a roof rack. First, Thule Podium Roof Mounted Foot Pack for Square Load Bars, # TH460. Next, Thule Fit Kit for Podium Style Foot Pack, # THKIT3028. Finally, the load bars, # THLB50. I have included some videos showing installation on a similar vehicle below. You could then add Thule Sidearm Roof Mounted Bike Rack - Wheel Hook, # TH594, to carry a bike. I have
view full answer...
- Availability of a Trailer Hitch for the 2007 BMW 328i
- If you have a BMW 328i Wagon then the only hitch available is the Curt Class I Trailer Hitch Receiver with Drawbar, item # 11771. The Curt Trailer Hitch for the BMW 3 Series, 2007, item # 11756, will only fit the BMW 335i Sedan and will not work on the 328i sedan or wagon.
For the BMW 328i sedan, I would recommend the Draw-Tite Sportframe Trailer Hitch Receiver, part # 24857.
view full answer...
- Which Hitch fits a 2010 BMW X3 SUV
- Hitch # 11771 is for 2006 BMW 325xi Wagons and 2007-2010 328 Wagons, not the BMW X3.
The proper hitch for a 2010 BMW X3 is Curt part # 13573. BMW X3s are not in the 3 series family like the coupes, sedans and wagons are. When shopping for parts in the future, remember to look specifically for the X3, not 3 series.
I have added a link to the hitch and the install instructions below.
view full answer...
- Will The Curt Trailer Hitch, # 11771, Fit The 2010 BMW 328 Wagons
- The Curt Trailer Hitch, # 11771, will fit the 2010 BMW 328 wagons, both 328i and 328xi wagons. I called the supplier (Curt) and they said they did not have any fitment information on the 2011 BMW 3 Series Wagons.
The hitch does come with the ball mount, pin and clip. You will need a hitch ball, either the Curt 2 Inch Hitch Ball, # A-82, or the Curt 1-7/8 Inch Hitch Ball, # A-80.
If you have regular incandescent tailights on your BMW, then the trailer wiring harness you will need is the Dr
view full answer...
- Hitch and Trailer Wiring Recommendations for 2009 BMW 328 Sports Wagon
- Yes, this Curt Trailer Hitch for the 2009 BMW 3 Series, part # 11771, will fit your 2009 BMW 328 Sport Wagon.
The wiring harness you would need for your BMW is the Tow Ready Wiring for the 2009 BMW 3 Series, part # 119176KIT. This harness is designed to work with LED taillights, like the ones that are you your BMW 328 wagon.
view full answer...
- What Does the Curt Hitch # 11771 Look Like When Installed on a BMW Sport Wagon
- There is minimal trimming required to install the Curt Trailer Hitch, item # 11771, on the 2009 BMW 3 Series Sport Wagon. I have linked instructions that show the trimming that is required.
Once installed the hitch receiver tube and safety chain loops will be the only visible part of the hitch from the rear of the vehicle.
We have not had the opportunity to install this hitch at our facility yet, so I called Curt Manufacturing and they were kind enough to send a photo of the hitch on a 32
view full answer... 
- Will Curt Hitch # 11771 Fit A 2006 BMW 328I
- The Curt Class I 1-1/4 Inch Hitch # 11771 will only fit the 2006 BMW 328I Wagon. It will not fit the 2006 BMW 328I Sedan. The ball mount, pin and clip are included.
If you have the 328I Wagon and are going to tow with the Curt hitch you will also need a hitch ball like the Tow Ready 2 Inch Hitch Ball # 19258. You will also need the Tow Ready Modulite Wiring Harness # 119176KIT.
If this hitch is used for non-trailer loads like a bike rack or cargo carrier it will require a stabilizing str
view full answer...
- Will Curt Trailer Hitch 11771 Fit a 2007 BMW 328i Sedan
- We do offer two hitches to fit your 2007 328i sedan, but Curt trailer hitch # 11771 is only a fit for the 2007 BMW 328 sports wagon models. This hitch will not fit your sedan.
I would recommend the Hidden Hitch model # 60273 for your needs, as it includes a ball mount and pin and clip that would be required if you ever tow a trailer. I am including a link to the hitch installation instructions for reference.
If you decide to tow a trailer, you will also need wiring and a hitch ball. You
view full answer...
- What is Needed to Install a Curt Trailer Hitch Receiver # 11771 on a 2006 BMW 3-Series
- The tools that you will need to install this Curt Trailer Hitch Receiver with Drawbar, part # 11771, are:
Ratchet
10mm socket
18mm socket
3/4 inch socket
5/16 inch open end/box wrench
5/8 inch open end/box wrench
11/16 open end/box wrench
18mm open end/box wrench
small disk grinder
torque wrench
For the best possible access you will want to have your vehicle lifted with either a car-lift or a jack. If you use a jack make sure to secure the vehicle with jack stands. As long as you
view full answer...
- Trailer Hitch Recommendation for a 2006 BMW 325xi Wagon
- The CURT Trailer Hitch, # 11771, fits the 2006 BMW Wagon 325xi, 328xi, and 328i. If your BMW is the wagon model xi then this hitch will fit. At this time there are no options for a Sedan. I have included a link to the installation details for you.
If you plan on doing some towing, the hitch comes with a ball mount, pin and clip. For a ball use # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diameter). For trailer wiring, use # 119176KIT. I have included a link to the installation details for
view full answer...
- Trailer Hitch Recommendation for a 2011 BMW 328i xdrive Wagon
- The Curt trailer hitch # 11771, will fit your 2011 BMW 328i wagon. I spoke with my contact at Curt and he verified that it is a fit for your BMW. I have included a link to the installation instructions for you.
If you plan on doing some towing the hitch comes with the correct ball mount, hitch pin, and clip. For a ball you can use # 19256 for a 1-7/8 inch diameter and # 19258 for a 2 inch diameter. For trailer wiring, I recommend seeing a local dealership for a compatible wiring harness.
view full answer...
