Draw-Tite Trailer Hitch for the Buick Electra, 1984

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - Buick Electra, 1984

Fully welded Buick Electra trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

Features:

• Custom fit is designed specifically for your Buick Electra
• Computer-aided, fully welded steel construction ensures strength and durability
• Tested Tough - safety and reliability criteria exceed industry standards
• Easy, bolt-on installation - no welding required
  • Complete hardware kit and installation instructions included
• Lifetime technical support from the experts at etrailer.com
• Black powder coat finish covers e-coat base for superior rust protection
• Sturdy, square-tube design
• Ball mount, pin and clip sold separately
• Made in USA

Specs:

• Receiver opening: 2" x 2"
• Rating: Class III
  • Maximum gross trailer weight: 3,500 lbs
    • Maximum GTW when used with weight distribution: 5,000 lbs
  • Maximum tongue weight: 350 lbs
    • Maximum TW when used with weight distribution: 500 lbs
• Limited lifetime warranty

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.

Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.

In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.

etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

75146 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame

Buick Electra, 1984 Owners Who Purchased This Trailer Hitch Also Bought...

Ball Mount 2-3/4" Rise or 4" Drop - Extra-Long, 6,000 lbs $22.95

Pin and Clip For Class III, IV and V Trailer Hitch Receiver $5.16

American Flag 2" Trailer Hitch Receiver Cover $14.95

E-Track 2" D-Ring, 3.5K $5.49

Pollak 7 Pole to 4 Pole Connector Adapter $8.99

Ask the Experts about this Draw-Tite Trailer Hitch

• Draw-Tite Trailer Hitch 75146 for 1996 Buick Roadmaster with Dual Exhaust
  
• A dual exhaust system might interfere with installation of the Draw-Tite hitch 75146, depending on the exhaust pipe location. At most, you may need to temporarily lower the exhaust pipes to install the hitch. Yes, all hardware including mounting bolts and necessary fishing wires are included with all our hitches.
  view full answer...


• What Vehicles will Draw-Tite Hitch 36250 Fit
  
• I spoke with my contact at the manufacturer and the hitch # 36250, is an obsolete model that fits 1977-1984 Cadillac Calais, 1977-1984 Cadillac DeVille and 1977-1996 Fleetwood Brougham. The replacement hitch for your 1981 Cadillac Fleetwood Brougham is part # 75146.
  view full answer...


• Will the Draw-Tite Class III Trailer Hitch # 75146 Fit on a 1970 Bonneville 455
  
• We do not carry hitches for the 1970 model Bonneville. The oldest model we have at this time is 1977 and the hitch design is definitely not going to match the frame on your 1970 model vehicle. We do have the Custom Built Class IV Ultra Frame Trailer Hitch, item # 41990 or 41991, which could be used along with the 7 inch Weld-on Bracket Kit for Class IV Ultra Frame Trailer Hitch Receiver, item # 4907, to install a receiver hitch on your vehicle. This is a custom weld on application and will re
  view full answer...


• Trailer Hitch for a 1993 Chevy Caprice Station Wagon
  
• The only trailer hitch that will fit a 1993 Chevy Caprice Wagon is the Draw-Tite Trailer Hitch, # 36105. I have included a link to the installation instructions for you to view. You would not want to modify a hitch made for a different vehicle because it would void the warranty and can compromise the structural integrity of the hitch making if unsafe for use. Hitches for the sedan have different mounting locations that the hitch for the wagon so you could not make it fit. If you plan to do so
  view full answer...


• Trailer Hitch Recommendation for a 1994 Buick Roadmaster Estate Wagon
  
• We do have a hitch available for the 1994 Buick Roadmaster Estate Wagon. You can use Draw-Tite trailer hitch, # 36105. Draw-Tite and Hidden Hitch are sister companies. I have included a link to the installation instructions for you to view. The Class III hitches for this vehicle are all obsolete. This hitch is rated for 3,500 pounds gross trailer weight and 300 pounds tongue weight. If the empty weight of the 1972 Airstream is at or near 3,500 pounds, you are likely to be over capacity once i
  view full answer...

Buick Electra Accessories

Buick Electra Trailer Hitch - 1984

Buick Electra Trailer Wiring - 1984

Buick Electra Roof Rack - 1984

Buick Electra Air Filter - 1984

Buick Electra Suspension Enhancement - 1984

Buick Electra Transmission Cooler - 1984

Buick Electra Fluid Filters - 1984

Buick Electra Floor Mats - 1984

Buick Electra Vehicle Covers - 1984

Buick Electra Replacement Mirrors - 1984

Buick Electra Windshield Wiper Blades - 1984