Lowest Prices for the best Trailer Coupler from Toledo. Toledo Actuator - 2" Bulldog Coupler - 5,000 lbs. part number 16006 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
Select Your Vehicle

View Cart

Trailer Coupler > Brake Actuator Coupler > Weld-On > 2 Inch Ball Coupler > A-Frame Coupler > No Lockout > Drum Brakes > 5000 lbs GTW > Toledo

Toledo Actuator - 2" Bulldog Coupler - 5,000 lbs.

Toledo Trailer Coupler

Code:   16006


Shipping Special

Shipping Weight: 41 pounds


Toledo Trailer Coupler - 16006

  • Ball Size: 2"
  • A-Frame Mount actuator with Bulldog coupler
  • Capacity: 5,000 lbs

Toledo Actuator has a rugged design with standard 50 degree A-Frame mount flange. It has a breakaway device which sets and locks the trailer brakes in the event of tow vehicle/trailer separation. The unique shock absorber/coil spring design of this actuator provides smooth positive stopping power eliminating the possibility of damaging peak pressures to the system.


Ask the Experts about this Toledo Trailer Coupler
Do you have a question about this Trailer Coupler?

  • Availability of an A-Frame Trailer Brake Actuator and Coupler for a Pace Trailer
  • We do have numerous A frame brake actuators available but they are all weld-on applications. For a weld-on actuator, I recommend having the welding done by a qualified professional welder. You will want the actuator that is closest to but not under the 3,500 pounds your trailer weighs. An actuator that is too large will have reduced functionality. I recommend the Toledo Actuator, # 16006. This is a 5,000 pound capacity actuator, A-frame, weld-on, and accepts a 2 inch diameter trailer...
    view full answer...

  • How Long is the Spring for the Push Rod on Toledo Trailer Brake Actuator 16006
  • I spoke with Toledo and found that the spring on the push rod for actuator # 16006 is 4 inches. There are a lot of factors that go into getting the correct spring including the OD and ID, tensile strength, active coils and so on. The incorrect spring can cause the actuator to not function properly and the trailer not to brake properly. The correct push rod assembly for your actuator is # 34850590.
    view full answer...

Do you have a question about this Trailer Coupler?

Info for this part was:

Expert Research:
Michael H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Stay Connected

Subscribe to email newsletter


privacy - we don't send unsolicited email

etrailer.com reviewsetrailer.com reviews

All images, layout and content copyright etrailer.com