Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Add a tie-down point to your truck or trailer with this Snap-Loc E-track anchor. Made of 3.5-mm steel, this low-profile, black tie-down anchor blends well with your vehicle's trim. Bolt on wherever you need a strap-down point.
Features:
Specs:
Great for contractors, movers, motorcyclists and towers, the Snap-Loc bolt-on anchor lets you install a permanent tie-down point wherever you need it, so you can securely strap down your equipment or supplies. Just bolt the anchor onto any smooth surface in your trailer, truck or garage, and it's ready whenever you need to tie down a load.
E-track accessories, such as cargo straps and ring attachments (sold separately), snap securely into the anchor slot using a spring-loaded mechanism. Just pull back on the E-track attachment's lever, put the end into the slot, and then release the lever.
The Snap-Loc has a low profile, so it fits in places that other anchors don't - even on the side of your open tailgate. You can still close your tailgate as usual with the anchor installed. The streamlined fit also keeps the anchor out of your way when it's not in use. And if you need a recessed tie-down point, this single E-track anchor can be installed upside down - your E-track accessories will still lock into it securely.
Put the anchor on your trailer floor and you can strap pallets directly to it, or attach an anchor to your trailer wall to provide a strap-down point. Mount the Snap-Loc anchor to the ceiling, and you can secure ladders or other long loads above the cargo that's on the floor. The single-slot anchor also gives you a cleaner look for a more economical price than heavier 2' or 6' long E-track sections. The stylish, black powder coat finish resists rust and blends with your black OEM trim.
Use the anchor with a Snap-Loc cargo strap or Loc-Ring (each sold separately) to tie down equipment, large loads or camping supplies, or for trailering a motorcycle.
Video of Snap-Loc E-Track Tie-Down Anchor - Round Hole - Bolt On - 3,000 lbs - Black - Qty 1
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
On this 2003 Ford F250, we're going to be installing the snap lock tie downs part # SLB25. To install this tie downs, we'll also use the hardware kit part # SLHZ. The first thing we need to do is position our snap locks on the bed of our truck. We'll take a paint marker and use it to mark our drill holes. Once we have our snap locks marked out, we'll go ahead and take a drill and drill out our holes. We also want to make sure that on the underside of the bed, we're not going to drill under anything like fuel lines or electrical systems.
With our holes drilled, we can start to feed in our hardware. We'll drop the bolt through the top and on the bottom of our bed we'll use the washer and nylon lock nut. You probably need somebody to be on the underside of the bed to hold the nut with a wrench while you tighten the bolt from above. With all of our hardware tightened down, that's it for our install of the snap lock tie downs part # SLB25 on our 2003 For F250.
Customers compare SLB25 to these similar products
Customers Who Purchased This Trailer Cargo Control Also Bought...
Average Customer Rating: 
4.7 out of 5 stars (7 Customer Reviews)
by: BikerBob05/08/2013
Is this review helpful?
Point blank they work very well. 79508
by: Steven04/08/2013
Is this review helpful?
Excellent idea for those who want small(ish) tie down points that don't intrude on the function of the inside of their trailer (i.e. Toy Haulers). These are a little tight compared to regular e-track, and the D-rings I bought to go with these (item # E59143) needed a minor amount of persuasion in the vice to work properly. Would've gotten 5 stars otherwise.74760
by: Terry01/24/2013
Is this review helpful?
I installed these E-Track singles on my utility trailer for a better way to tie down my side x side UTV. Very heavy duty feel. I got these to use with the Erickson E-Track adjustable tire straps. I got the ones with black powder coat and I had to use a Dremel to remove some material from the inside of the track to make the strap insert and remove properly. (Easily). Could be due to a rivet on the strap mechanism but no big deal. Very good product when a whole "length" of track is not necessary.64028
by: Justin12/13/2012
Is this review helpful?
Great shipping! Received fast and the quality is as expected!61326
by: Lawrence Y.07/17/2012
Is this review helpful?
Looks good on a black trailer. 48312
by: Brenda Boothe06/30/2012
Is this review helpful?
When I called everyone was very helpful. I did not have all the information on the parts that I needed but they worked with me and figured out what I need. My parts arrived in quick time and the installation was very easy. I will recommend them to anyone.46346
by: JohnH02/19/2012
Is this review helpful?
Product was just what i was looking for! Happy to find etrailer.com and will buy again! 32002
Ask the Experts about this Snap-Loc Trailer Cargo Control
Do you have a question about this Trailer Cargo Control?
Related Products...
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
