Select Your Vehicle
view cartView Cart

Free Shipping on Orders Over $99

Only 1 Hours 17 Minutes Remaining



Trailer Cargo Control > Cargo Organizers > Landscaping > Shovel Rack > Rackem


Open Utility Shovel, Rake and Broom Holder - Use with RA-6RL

Rackem Trailer Cargo Control

Code:   ra-23

Retail:$102.99

Price:$78.95


Shipping Special

Shipping Weight: 7 pounds

Quantity: 






Rackem Trailer Cargo Control - ra-23

6 Place Shovel Holder by Rack'em for use with RA-6RL Trimmer Holder

Open utility trailer trimmer rack is pre-drilled to permit quick installation. The "hammered" paint finish and heavy gauge steel construction ensure a durable and long lasting rack, ideal for securing your valuable equipment on the trailer.

  • Holds up to (6) shovels, rakes or brooms
  • Padding around holes reduces movement and noise
  • RA-23 attaches to the RA-6RL Trimmer Rack


RA-23 Open Utility Shovel, Rake and Broom Holder - Use with RA-6RL







Video of Open Utility Shovel, Rake and Broom Holder - Use with RA-6RL


Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video review rackem lockable trimmer rack ra 6rl
Rackem Utility Trailer Lockable Trimmer Rack Review

Video Transcript for Rackem Utility Trailer Lockable Trimmer Rack Review

Today we're going to be taking a look at the Rack'em Lockable Trimmer Rack for Utility Trailers, part number RA-6RL. Here's what our Rack'em rack looks like installed on our utility trailer. We've already installed two of our gas trimmers in it. You will notice that it is attached, actually, on the driver's side of the trailer. Ideally, we would have put this on the passenger side, but our particular application today will not allow that. Now, you want to install the two uprights approximately 3 feet apart, and you will need to supply the hardware to attach the rack to your trailer. On some applications, such as ours, you may even need to notch the wood to allow the rack to fit down properly so that you can bolt it to the lower half of your trailer here. Let's go ahead and show you how our rack works. We'll need to first undo our padlock that is securing our trimmers to the rack itself. The padlocks we're using today are DT High Security Locks. You can purchase these in a three pack that are all keyed alike.

That's part number DT40124KA3PK, or these locks can be purchased individually, which is part number DT40124. Now the three pack works nice when you're using the Rack'em system, because you'll need one for this upright as well as one for the other upright. Then if you'd have a blower backpack, or some other accessory, you'd have an additional lock that is keyed the same. Now we'll go ahead and take our key for the lock, go ahead and unlock it. Go ahead and remove the other lock. We'll go ahead and swing the arm open. We'll go ahead and open up the other arm here. What you'll notice that there's a rubber flapper piece here, or trimmer hold down piece, and this right here can be cut, or customized, for your individual accessory.

In this case we're using trimmers. With the arms open, we can go ahead and lift our trimmer out. Now, this top trimmer hold down piece, which there's one at each location, these are replaceable and they are sold in two packs, part number RRD. We'll go ahead and remove one and show you what it looks like. Here's what the trimmer hold down piece looks like. Again, these are sold as replacement items, in a two pack, part number RRD. These are also customizable, where you can trim out sections if maybe you have a larger accessory that needs to fit in there. You'll also notice where the trimmer sits in place has a rubber coating on it as well as the flapper arm is rubber so that it doesn't damage your trimmer as it's going down the road. This rack is designed to hold a total of three trimmers. Once we have our trimmer in place, we can go ahead and close the flapper arm. You notice how the flapper arm grabs the trimmer.

Go ahead and close the other end. Then we can re-install each of our locks, securing the arms so that they can't be opened up. A nice thing about these DT barrel style locks, is you can only remove the key if the lock is in the locked position. It will not let you pull the key out if you're not fully locked. Now we'll go ahead and install this one. Now that our locks are secure, we're ready to hit the road. This rack does have an overall height of 48 inches.

You can also purchase the Rack'em Utility Shovel, Rake, and Broom Holder to use with this Trimmer Rack. That's part number RA-23. That will do it for our quick look at the Rack'em Lockable Trimmer Rack for Utility Trailers, part number RA-6RL. .



0
0



Info for this part was:


Video Edited:
Jacob T

Updated by:
Laura H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.










Stay Connected


Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email





Free Shipping on Orders Over $99

Only 1 Hours 17 Minutes Remaining


etrailer.com reviewsetrailer.com reviews

All images, layout and content copyright etrailer.com