CE Smith Stake Pocket for Flatbed Truck or Trailer - Galvanized Steel - Bolt On - Qty 1

CE Smith Trailer Cargo Control - CE45004G

This corrosion-resistant stake pocket bracket bolts onto your trailer or flatbed truck. The pocket accepts a 2x4 so that you can build a sidewall to keep your cargo in your trailer or truck bed.

Features:

• Heavy-duty bracket attaches to your flatbed truck or trailer to create 1 stake pocket
  • Supports a 2x4 stake
  • Can be used to support a home-built gate or fence to keep cargo in place
• Bolt-on installation
  • Requires 3/8" mounting bolts - not included
  • Center bolt hole can be used to secure board in position
• 11-Gauge, galvanized steel construction is sturdy and resists corrosion
• Made in USA

Specs:

• Application: trailers and flatbed trucks
• Overall dimensions: 3-1/2" long x 1-1/2" wide x 2-1/2" tall
• Stake pocket opening: 3-1/2" wide x 1-1/2" deep
• Diameter of mounting holes (each): 3/8"

NOTE: Will accommodate a standard 2x4, which measures 1-1/2" x 3-1/2"

Galvanized Steel

Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mm to 5 mm thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.

45004G 11-Gauge, Galvanized Steel Stake Pocket by CE Smith

Customers compare CE45004G to these similar products

Trailer Weld-on Stake Pocket$6.99

Trailer D-Ring Tie Down, Bolt-on, 5K$5.49

E-Track Wood Beam Socket for Standard 2" Lumber - Qty 1$6.49

E-Track Trailer Cargo Control - Horizontal - 5 Foot Long$14.99

Weld On Trailer D-Ring$7.67

Customers Who Purchased This Trailer Cargo Control Also Bought...

E-Track Tie-Off Ring, 4K $4.59

Trailer D-Ring, Light Duty Tie Down $5.09

Light Duty Trailer Tie-Down, 1k $3.29

Trailer D-Ring Tie Down, Bolt On 2-1/2" x 2-3/8" Surface Mount $5.99

Sealed, 6-1/2" Oval LED Trailer Stop, Turn and Tail Light, Flange Mount, 10 Super Diode $17.95

Ask the Experts about this CE Smith Trailer Cargo Control
Do you have a question about this Trailer Cargo Control?

• Will the CE Smith Stake Pocket, # CE45004G, Hold a 2 x 4
  
• I went out to the warehouse and pulled a CE Smith Stake Pocket, # CE45004G, to take some measurements. The dimensions listed on the product page are correct. The opening is 3-1/2 inches wide by 1-1/2 inches deep. A lumber industry standard 2x4 apparently is not exactly 2 inches by 4 inches but 1-1/2 by 3-1/2 (or close to it). The center to center distance between the 2 outside holes is 4-13/16 inches. I made a picture showing all of the measurements for you.
  view full answer...