See What Fits Your Vehicle
customer service | view cart  View Cart

Trailer Brakes > Electric Drum Brakes > Brake Assemblies > 10 x 2-1/4 Inch > 3500 lbs Axle > Left Hand Side > Manual Adjust > TruRyde

TruRyde Electric Brake Assembly - 10" - Left Hand

TruRyde Trailer Brakes

Rating: ratingratingratingratingrating
22 reviews


Code:   TRBK10E01

Retail:$34.95

Price:$29.95

Shipping Weight: 10 pounds

Shipping Special
Quantity: 




TruRyde Trailer Brakes - TRBK10E01

Driver's-side electric trailer brake assembly measures 10" x 2-1/4" and features a thoroughly tested magnet and high-quality friction material. Rated for up to 3,500-lb axles.

Features:

  • Electric brakes are easier to install and offer more user control than hydraulic brakes
    • Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines necessary
  • Durable magnet is thoroughly tested for pull force and conductivity
  • SAE rated friction material lines brake shoes


Specs:

  • Configuration: left hand
  • Dimensions: 10" diameter x 2-1/4" wide
  • Wheel size: 13", 14" and 15"
  • Mounting flange bolt pattern: 4 bolt
  • Mounting studs included
  • Axle rating: up to 3,500 lbs
  • Limited 1-year warranty


BK-10E-01 TruRyde 10" x 2-1/4" Left-Hand Electric Brake Assembly

Replaces 23-26 Dexter 10" x 2-1/4" Left Hand Electric Brake Assembly





Video of TruRyde Electric Brake Assembly - 10" - Left Hand


Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video Demo TruRyde Trailer Brakes TRBK10E01
TruRyde 10" Left Hand Electric Trailer Brakes Review
Video install truryde electric trailer brake assembly trbk10e01
TruRyde Electric Brake Assembly Installation

Video Transcript for TruRyde 10" Left Hand Electric Trailer Brakes Review

Today we are going to show you the TruRyde Electric Brake Assembly particularly for left hand side, part number TRBK10E01. This is a 10 by 2-1/4 brake assembly. Well measure the diameter across the shoes, and thats where we get our 10, and then we will measure the width of the shoe ant theres our 2-1/4. This assembly utilizes a four bolt flange mount pattern, so you will need to double check your axel and make sure what pattern you have. There are a pair of wire leads, and it doesnt matter which you use for the brake feed and the ground. Either one is fine just make sure you have a good strong electrical connection.

When paired up with the right hand assembly these axels are good up to 3,500 pounds. This is a manual adjust assembly which means that over time the shoes will wear, and you will need to adjust the tension to make sure you have adequate braking power. To do this, you will rotate the star wheel to open and close the shoes as needed. The way the brake assembly works is as you apply brake pressure in your tow vehicle, the magnet will charge and adhere to the drum that is rotating around. As the magnet drags against the surface of the drum it will pull this arm and open up the brakes and apply brake pressure slowing down your trailer.

The brakes are covered by a limited one year warranty, we know that this is the left hand side, because we always put the short shoe towards the front, and the long shoe towards the rear of the trailer. And that does it for the TruRyde Electric Brake Assembly particularly for left hand side, part number TRBK10E01.


Customers compare TRBK10E01 to these similar products





Customers Who Purchased This Trailer Brakes Also Bought...






Customer Reviews

TruRyde Electric Brake Assembly - 10 - TRBK10E01

Average Customer Rating:  ratingratingratingratingrating4.6 out of 5 stars   (22 Customer Reviews)




- TRBK10E01

ratingratingratingratingrating by: Garry Mc.05/21/2013

Is this review helpful?


Got part quickly, installed in a breeze. Got some good tech help also. So far I'd say this is a good company to deal with.81308

comment on this review


- TRBK10E01

ratingratingratingratingrating by: Barry M.05/09/2013

Is this review helpful?


Perfect match. Came with new studs, but could have also used new nuts. I had to split one to get old assembly off.79536

comment on this review


- TRBK10E01

ratingratingratingratingrating by: Fe04/26/2013

Is this review helpful?


very good quality, will order other side very soon77969

comment on this review


- TRBK10E01

ratingratingratingratingrating by: Joe M04/11/2013

Is this review helpful?


very good product 75431

comment on this review


- TRBK10E01

ratingratingratingratingrating by: Kurtis03/15/2013

Is this review helpful?


Great product and fits perfect 70889

comment on this review


- TRBK10E01

ratingratingratingratingrating by: Paul02/28/2013

Is this review helpful?


always great to deal with amazing the stuff on back order always comes with the order. thanks again as always a repeat buyer68137

comment on this review


- TRBK10E01

ratingratingratingratingrating by: Bill12/29/2012

Is this review helpful?


product is used for upgrade of the old style brake magnets & brakes. complete replacement of the brake assembly was simple & time saving. very satisfied w/ TruRyde products & service. 62200

comment on this review


- TRBK10E01

ratingratingratingratingrating by: Jim H12/14/2012

Is this review helpful?


Exactly as it should be. No issues. Lower cost replacement for Dexter original, works perfectly. Studs are 7/16-20. The studs were slightly loose in the axle flange that they were installed in, so make sure to install drum with bearings and adjust shoes up tight BEFORE tightening the backing plate nuts. This will make sure that the brakes are centered in the drum.61451

comment on this review


- TRBK10E01

ratingratingratingratingrating by: tim k12/11/2012

Is this review helpful?


great products very fast shipping.poor packaging boxs were destroyed.61126

comment on this review


- TRBK10E01

ratingratingratingratingrating by: Bill B12/10/2012

Is this review helpful?


Brake assembly ( left and right ) were delivered quickly and I actually installed the day they were delivered.61067

comment on this review


- TRBK10E01

ratingratingratingratingrating by: Richard L.10/06/2012

Is this review helpful?


Great SERVICE packaged well and arrived fast.Just as stated in the product desc. Will buy from etrailer again!!!!!!56584

comment on this review


- TRBK10E01

ratingratingratingratingrating by: Lou10/05/2012

Is this review helpful?


Product was new Nuts and washers were not included had to buy them Have not installed yet but looks good Delivery was fast and transaction was good would use etrailer again56344

comment on this review


- TRBK10E01

ratingratingratingratingrating by: Rod frisbee09/16/2012

Is this review helpful?


Excellent price excellent service excellent communications. 54824

comment on this review


- TRBK10E01

ratingratingratingratingrating by: Jason J08/07/2012

Is this review helpful?


Shipped fast and went on easy. 50816

comment on this review


- TRBK10E01

ratingratingratingratingrating by: Will B07/30/2012

Is this review helpful?


Everything for the price of the brake pads. Just can't go wrong. 49925

comment on this review


- TRBK10E01

ratingratingratingratingrating by: Dustin S07/19/2012

Is this review helpful?


Brakes work great and easy installation. Better than replacing brake shoes alone. Best price around!48566

comment on this review


- TRBK10E01

ratingratingratingratingrating by: Randson H07/06/2012

Is this review helpful?


Product works well so far, looks like it should last. Good value for the money, great service at ETrailer.46968

comment on this review


- TRBK10E01

ratingratingratingratingrating by: Donald S07/06/2012

Is this review helpful?


Great prices quick delivery Very satisf ied46873

comment on this review


- TRBK10E01

ratingratingratingratingrating by: Mike R06/08/2012

Is this review helpful?


easy to install but dosn't come with lock washers or nuts to bolt to axle will need 4 per 7/16-20 nuts43318

comment on this review


- TRBK10E01

ratingratingratingratingrating by: Rick Baird06/06/2012

Is this review helpful?


Quick and accurate just what I needed already recomended to three other people43038

comment on this review


- TRBK10E01

ratingratingratingratingrating by: kevin h06/06/2012

Is this review helpful?


awesome! direct easy bolt on replacement, superfast shipping arrived before expected, great products! i will be a returning customer43026

comment on this review


- TRBK10E01

ratingratingratingratingrating by: Tanya05/10/2012

Is this review helpful?


Great 39866

comment on this review


Ask the Experts about this TruRyde Trailer Brakes
Expert Answers about TruRyde Electric Brake Assembly - 10" - Left Hand - TRBK10E01                                         Do you have a question about this Trailer Brakes?


  • Distance Between Mounting Bolts on the TruRyde 10 Inch Electric Brake Assembly
  • I went out to the warehouse and measured the distance between the mounting bolts on the TruRyde 10 inch Electric Brake Assembly, # TRBK10E01, and verified that it is 2-7/8 inches from center to center. Standard brake mounting flanges should have the 4 bolt holes that are 2-7/8 inches apart and 4 inches diagonal. I have attached a photo of the measurement I took for you.
    view full answer...

  • Electric Drum Trailer Brakes for a 2004 Pace Trailer with Tandem 3500 Pound Axles
  • One way that you might be able to determine if you have self-adjusting or regular brakes. On self-adjusting brakes like # 23-468 as an example there is a cable that attaches one shoe to the other. You can see it in the picture on the product page. A manual adjust brake like # TRBK10E01 that you have referenced does not have this cable. If you want regular manually adjust 10 x 2-1/4 brakes you can use # TRBK10E01 for the left side and # TRBK10E02. For self-adjusting 10 x 2-1/4 brakes you
    view full answer...

  • Braking is Weaker After Replacing Electric Trailer Brakes
  • Anytime you put on new brakes you have to make sure to adjust them. There is a little adjustment wheel below the magnet accessible through a hole on the back side of the backing plate. Use a screwdriver or similar flat blade tool to turn the wheel. You will keep turning it until the pads drag slightly but consistently on the drum when you turn it. I have included a link to a video showing the process. Fast forward to about the 1:55 minute mark to see the process. If you have done this and bra
    view full answer...


Info for this part was:


Written by:
Lindsey

Edited by:
Leah

Test fit by:
Patrick

Video by:
Zack

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.





Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email




etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com