Bearing Kit, LM67048/25580 Bearings, 10-36 Seal

TruRyde Trailer Bearings and Races - BK3-300

Trailer Hub Bearing and Race Kit

Kit Includes:

• One Inner Bearing and Race
• One Outer Bearing and Race
• Grease Seal
• Cotter Pin

Customers compare BK3-300 to these similar products

Bearing Kit, LM67048/25580 Bearings, 10-10 Seal$17.47

Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal$17.90

Replacement Trailer Hub Bearing - LM67048$3.49

Replacement Trailer Hub Bearing - 25580$5.95

Bearing Kit for #84 Spindle, L44649/L68149 Bearings, 10-19 Double Lip Seal$11.98

Customers Who Purchased This Trailer Bearings and Races Also Bought...

Grease Seals 10-36 (pair) $3.90

Trailer Wheel Lug Nut - 1/2"(Each) $0.58

Lockwasher for Brake Mounting Bolt for 12" Brake Assembly $0.15

Nut for Brake Mounting Bolt for 12" Brake Assembly $0.22

Wire Loom, 1/2" Diameter (per Foot) $0.34

Ask the Experts about this TruRyde Trailer Bearings and Races
Do you have a question about this Trailer Bearings and Races?

• Is TruRyde Outer Bearing # LM67048 Equal to Timken Bearing 02475
  
• The outer bearing in the TruRyde Bearing Kit, part # BK3-300, is part # LM67048. This outer bearing has an internal diameter of 1.25 inches and uses a bearing race # LM67010 with an outer diameter of 2.328 inches. The bearing kit # BK3-300 is designed for 5,200-lbs axle, 6,000-lbs axle, and 7,000-lbs axle. I looked up a Timken # 02475 bearing and it also shows an internal diameter of 1.25 inches, but is rated for a larger 8,000-lb axle, so it will be used on a larger hub with a different s
  view full answer...


• Will The Double Lip Seals in Bearing Kit # BK3-300 Work on a Horse Trailer
  
• Yes the double lip grease seals in the TruRyde Bearing Kit, # BK3-300, will work on your horse trailer axle as long as it is the correct size seal for your spindle. I have attached a photo showing how to measure the inner and outer diameter of the seal and where to measure on your spindle to make sure it will fit. The double lip seals are usually found on marine applications because the outer and inner lips make it a much more effective and durable seal when the wheels are going in and out o
  view full answer...


• Which Grease Seal for 5th Wheel Camper with Lippert 5200 lb Axle
  
• Assuming that your hubs use the LM67048 outer and 25580 inner bearings, you will need the # BK3-300 which uses the 10-36 double lip grease seal with a 2.25 inch inside diameter. The BK3-310 uses a seal with a 2.125 inch inside diameter, which would not be compatible with your spindle. If you wish, you can confirm this by using a digital caliper to measure the diameter of the spindle surface where the spindle rides, as shown in the diagram.
  view full answer...