Roadmaster Accessories and Parts - RM-038
An adapter makes mismatched tow bars and brackets compatible so you can use your Duncan Towmatic II, Karbar and EazAligner 2000 car-mounted tow bars with RoadMaster base plates.
Features:
- Works with a variety of tow bars - Duncan Towmatic II, Karbar, EazAligner 2000
- Fits RoadMaster XL, EZ and Standard brackets
- Requires RoadMaster Quick Disconnects if using either XL or EZ series brackets - sold separately
- Does not fit RoadMaster MX or MS series brackets
- Made in the USA
Customers compare RM-038 to these similar products
Customers who look at this part also view
Customers Who Purchased This Accessories and Parts Also Bought...
Ask the Experts about this Roadmaster Accessories and Parts
Do you have a question about this Accessories and Parts?
- Base Plate and Quick Disconnect for the Duncan Towmaster II Tow Bar On a 2000 Jeep Wrangler Sahara
- The base plate kit for your 2000 Jeep Wrangler Sahara will depend on the style of front bumper you have on your Jeep. If you have the double tube bumper you will need the Roadmaster XL Base Plate Kit, item # 1424-1. If you have the single tube bumper you will need the Roadmaster XL Base Plate Kit, item # 1420-1 and if you have the U-Channel bumper you will need the Roadmaster Standard Base Plate Kit, item # 1417-1.
To have quick disconnects to use with the RoadMaster Base Plates to Duncan Tow
view full answer...
- Adapter Needed to Attach an EAZ Aligner Tow Bar to Roadmaster Base Plates on a 1998 Suzuki Sidekick
- If you have the EazAligner 2000 car-mounted tow bar, you will need to use the RoadMaster Base Plates to EazAligner 2000 Tow Bar Adapter, item # RM-038, to safely connect your tow bar to the RoadMaster XL Base Plate Kit, item # 1009-1.
The Roadmaster Tow Bars, item # RM-032, is designed for certain Blue Ox and Demco tow bars only.
If you do not have safety cables you will need a set of those also. If your EAZ-Aligner tow bar has cable guides, use the straight safety cables, item # RM-645, a
view full answer...
- Tow Bar Adapter for Duncan EAZ-Aligner Tow Bar and Roadmaster Base Plates, 2003 Jeep Grand Cherokee
- I did a little research and found that the curb weight of a 2003 Jeep Grand Cherokee Limited is 4072 pounds. The weight could be different depending on what is inside the vehicle, if it is full of gas, and the options it has on it. I spoke with my contact at Roadmaster and the RoadMaster Base Plates to Duncan Towmatic II, Karbar and EazAligner Tow Bars Adapter, # RM-038, has a capacity of up to 6,000 pounds.
I searched for any information I could find on the EAZ-Aligner Tow Bar and found very
view full answer...
- Base Plates and Adapter for a Duncan EazAligner Tow Bar on a 1999 Jeep Wrangler
- For your 1999 Jeep Wrangler, you can use the Roadmaster XL Base Plates, # 1424-1, with quick disconnects, # RM-201, for use with the adapter you have referenced, # RM-038.
With base plates, the adapter, and a tow bar figured out, you will need to add safety cables, lighting for the Jeep, and supplemental braking. For safety cables, I recommend the coiled cables, # RM-643. The coiled design helps to keep the cables off of the ground.
For lighting I recommend the Blue Ox Tail Light Wiring Ki
view full answer...
- Weight Rating of the RoadMaster Base Plate Adapter # RM-038 and a Duncan Towmatic 2 Tow Bar
- The RoadMaster Base Plates to Tow Bar Adapter, item # RM-038, is tested for towing up to 10,000 pounds. The Adapter does not have a rating, like tow bars, because the tow bar is going to be the limiting factor when towing a vehicle. I spoke to my contact at the manufacturer and the gross weight rating of the Duncan Towmatic 2 Tow Bar, is 5,000 pounds.
This adapter will work with RoadMaster EZ and XL Base plate kits and will require a quick disconnect kit, item # RM-201, to remove the brackets
view full answer...
