Hopkins Magnetic Tow Lights - Red LEDs - 4-Way Flat Connector - Wireless
Item # C6304
Retail:$299.00
Our Price: $128.50
You Save: $170.50
Confirmed to Fit
2003 Dodge Ram Pickup
1500
2500
3500
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (53)
- Q & A (0)
- Photos
2003 Dodge Ram Pickup - Hopkins Magnetic Tow Lights - Red LEDs - 4-Way Flat Connector - Wireless
- Removable Tail Light Kit
- Bypasses Vehicle Wiring
- Magnetic Mount
- Universal
- Hopkins
Removable LED lights provide signal lights for your towed car without you having to tap into the car's wiring or run wires under the car. Wireless transmitter plugs into your RV's 4-way connector and sends a signal to the magnetic lights.
Features:
- Removable tow lights provide stop, tail, and turn functions for your trailer or towed car
- No need to wire your trailer or tap into wiring on your towed car
- Wireless transmitter eliminates the hassle of running cords to the lights every time you tow
- Plugs into 4-pole flat trailer connector on RV or tow vehicle and mounts to the frame with a magnet
- Emits a signal that triggers tow lights from up to 65' away
- Operates on a standard 12-volt system
- Heavy-duty, non-scratch magnets on the lights provide a secure grip without damaging your paint
- Long-lasting LEDs are more efficient, faster acting, and brighter than incandescent lights
- Sonically sealed lenses keep moisture out and prevent corrosion
- Durable polycarbonate bases house batteries
- On/off switch lets you use the lights as needed, conserving battery power
- 8 AA batteries (not included) are required to power the lights
- Flashing LED on driver's-side light indicates low battery
- Department of Transportation compliant
Specs:
- Application: towed cars or trailers no wider than 80"
- Light diameter: 4"
- Length of wire between lights: 106"
- Transmitter wire length: 76"
- 90-Day warranty
These wireless, removable tow lights make it easy to add running lights, brake lights, and turn signals to your towed car or trailer. With this setup, you won't need to tap into existing wiring for installation. With other magnetic tow lights, you have to run cords from the lights to the front of the towed car or trailer every time you need to tow. These tow lights work wirelessly to eliminate that hassle. And the wireless design also allows you to move the lights from one vehicle to another in minutes.
The lights attach directly to any metal surface with the included heavy-duty, non-scratch magnets, which won't damage your paint. And the handy on/off switch lets you use the lights only when you need them, saving battery power.
Setup is simple. Plug the included transmitter into the 4-way flat trailer connector on your RV or tow vehicle. The transmitter mounts to the frame of the RV or tow vehicle using the built-in magnet. Turn the switch on the driver's-side light to "on," and attach the tow lights to the back of the towed car or trailer, as far apart as is practical. Secure any excess wire between the 2 lights with a twist tie.
Each light is powered by 4 AA batteries (not included). A blinking LED indicator on the face of the driver's-side light signals low battery. This indicator should be checked every 2 hours to be sure your lights still have adequate power.
C6304 Hopkins International Wireless, Magnetic LED Trailer Towing Light Kit - 4-Wire Connector
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Defective
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Hopkins Magnetic Tow Lights - Red LEDs - 4-Way Flat Connector - Wireless - C6304
Average Customer Rating: 4.7 out of 5 stars (53 Customer Reviews)
Removable LED lights provide signal lights for your towed car without you having to tap into the car's wiring or run wires under the car. Wireless transmitter plugs into your RV's 4-way connector and sends a signal to the magnetic lights.by: Judy 04/15/2024
Honda
They work great on my Class C pulling my Honda CRV.
by: Brian 04/17/2024
2019 Thor Windsport Motorhome
I just received them and tested them out and they work great. They are very bright and responsive. I look forward to using them in the future when I tow my vehicle behind my RV.
by: Mike 04/04/2024
Very bright and quite easy to install
by: Kenny 12/01/2023
2003 Chevrolet Malibu
VERY GOOD SERVICE I HAVE ORDER THINGS FROM FOR YEARS I THINK THEY ARE THE BEST BAR NONE
by: John K07/15/2016
Ordered these because my car towing wiring had a problem and didn't have time to get it fixed. First set arrived but had a manufacturing defect and right hand light didn't work (not etrailer's fault!). Called etrailer and they were very accommodating in sending out a second set which arrived in time. The second set worked perfectly. Good service and extensive follow up by etrailer shows they care. I'll use them for other purchases any time!
by: Daniel 03/21/2023
Test connection went perfectly. Will see how it goes when we hit the road in May. The lights look well made and should last me a long time.
Thank for the great service!
by: Tom M07/10/2017
No big deal, install batteries and put on toad !
Should have done this years ago before they cut into my tail light wiring and also had to deal with rusted out 4 prong plug in over the years.
Tom M.
7/10/2018
Still the best and not a problem, quality product
by: Robert 09/16/2023
Wonderful product
by: Dan 05/04/2020
Lincoln MKZ
These things are the best thing since sliced bread!
We have a Lincoln MKZ that already has a hitch on the rear for towing a small enclosed trailer. The thought of having to "hard" wire in a wiring harness for towing behind the motorhome that would still allow the trailer to be towed was not a task I was looking forward to. etrailer suggested these as an alternative. Literally plug and play. Just plug the transmitter into the motorhome, install batteries and attach the magnetic based lights to the trunk of the MKZ and presto! DONE! I hooked the car up behind the motorhome and ran it down the freeway at 60-65 mph and all was good. Worked straight out of the box! Fantastic product!
by: Jack 01/23/2023
Great looking lights, LED wireless hook up makes this an easy installation and easy choice.
by: Jerry 07/08/2023
Works great no problems easy to install
by: John08/10/2022
I bought the wireless Hopkins tow lights to temporarily tow my new Jeep behind our Motorhome until I could wire the taillights permanently. I liked them so well that I have never wired the Jeep and only use the wireless taillights.
by: Bud Berger08/01/2017
Saturn Ion
These work well, bright. They do eat up regular Duracell batteries. After first use of these I switched to Lithium Ion. The lights were noticeably brighter in the daylight sun. The life of the batteries has drastically improved service. I have a habit of removing the batteries when not in use to enable greater duration; they do have an on/off switch built in, but it's so simple to remove them in case of phantom degradation. Over-all, I am very happy with these and installation on the car is a snap. Love them so far. Would buy/recommend to others.
by: Dan 12/22/2022
very easy to see and use. I hope I never have to rewire another old trailer. Love them.
by: Cheryl a.05/23/2018
2011 Ford Taurus
Was absolutely 100% delighted with this product. Drove a total of 2600 miles in all kinds of weather and traffic conditions and these lights worked perfectly. Batteries lasted all most to the end of the trip. I'd recommend this set up to everyone who cannot afford to have wiring redone on a vintage trailer.
by: Stan 06/01/2023
Great customer service
by: Donald 05/26/2023
Great experience.Fast service.
by: John 02/09/2023
2010 Honda Element
I have not tried this yet, but the design is excellent! Having a magnet on the transmitter to attach to the tow vehicle was just icing on the cake!
by: Phillip 01/20/2023
Great system
by: Miles M05/30/2019
These have been a lifesaver for our camper lights not working properly. Never had an issue with these
by: Camping man12/19/2022
works just like Quinn said
by: Kenneth12/15/2022
2020 Ford F-350 Super Duty
Great service, fast delivery and we’re very pleased with product
by: Michael03/28/2018
Product appears to work as represented. Have not had it on the road yet.
Michael
3/28/2019
Lights work great, and battery life is better than expected. Only issue is potential for paint damage... I recommend that the manufacturer consider a softer landing pad to reduce potential for paint scratches.
by: Allen03/07/2023
Allen
3/8/2024
It has worked out fine and as advertised. the manufacture needs to work out a quick charge system, with external jacks, or a large external rechargeable battery pack for tow-able vehicles for RVs that go on multi day tows.
by: Paul Guidry07/31/2014
will send back does not work
Jeff
9/10/2014
Have to use lithium batteries for them to work, I have a set and mine work with this type of battery in them only thing that needs improvement is they should be rechargeable units
25
53
Show More Reviews
See what our Experts say about this Hopkins Tow Bar Wiring
- How to Access The AA Batteries For Replacement on the Hopkins Magnetic LED Tow LightsThe Hopkins Magnetic Tow Lights # C6304 will have 8 AA batteries total with 4 batteries in the base of each light. The base twists off allowing you to access the batteries for replacement. There is also a switch on the base of the drivers side that allows you to turn the lights off when not in use to conserve battery life. When you see flashing on the drivers side light, this is an indicator telling you the batteries are low and need replaced.
view full answer... - Recommended Wiring Harness To Add Extra Visibility to Mercedes B200 on Tow DollyFor a Mercedes B200 there is not a custom wiring harness. Your vehicle is not intended to be flat towed so there is not a harness for wiring to do so as it should be towed with a dolly an thus have the lighting required. If you choose to add more lights to your tow dolly application, you can use a universal wiring harness like the Hopkins Magnetic Tow Lights - Red LEDs - 4-Way Flat Connector - Wireless # C6304 to give you the additional lighting.
view full answer... - Where Would Magnetic Tow Bar Lights Attach on Vehicle that Has Soft TopHey Cheryl, on a vehicle with a soft top like your 2009 Jeep Wrangler you'd need to attach magnetic lights like the part # C6304 to the bumper of since that's where metal would be.
view full answer... - Troubleshooting Hopkins Wireless Magnetic Tow Lights C6304Based on your troubleshooting efforts and the fact that this product did not operate properly on both of your vehicles I am inclined to think the unit has a defect. But you can easily test it, independent of the vehicles, to isolate the location of the issue. Use a 12V vehicle or spare battery to apply power directly to the wireless transmitter portion of the Hopkins Wireless Magnetic Tow Lights # C6304. Connect the battery ground to the pin for the white wire and then apply the battery...
view full answer... - Troubleshooting Wireless Tow Dolly Lights Where Only Left Tail Signal WorksYou've narrowed the problem down to being the wireless tow lights since you've tried them in a few vehicles with the same result. The easy solution would be that there's corrosion on the pins of the 4-way connector which is preventing the circuits from working like they should which would easily be fixed by taking sandpaper to them to clean them off. If it's not that though it's most likely an internal issue with the transmitter or the lights themselves.
view full answer... - Is The 7-Way Connector For The Pilot Magnetic Tow Lights Available As A Replacement?This isn't the first time that this has been asked, however the 7-way connector part of the Pilot Magnetic Tow Lights NV-5164 is not offered separately as a replacement unfortunately. However, I know it's not ideal, but in order to get the replacement 7-way connector you need, you'll need to purchase the entire kit again.
view full answer... - Where Should I Stick My Magnetic Tow Lights On My Ford Maverick?If I were you, I'd just stick the lights # C6304 to the roof of your Maverick and call it good. They'll be up high enough where anyone on the road will be able to see them, and they won't potentially slip off because they're getting ideal metal on magnet contact.
view full answer... - Magnetic Flat Towing Light Recommendation with 4-Way ConnectorThe Hopkins # C6304 LED magnetic tow light set is a good choice. The have good reviews and has a 4-way connector like you need. Check out the review video I attached for more info.
view full answer... - Can I Connect The Hopkins Magnetic Lights To 4-Pin and Still Use Brake ControllerThe Hopkins Magnetic Tow Lights part # C6304 are designed to be plugged into a 4-pin connector on a towed vehicle. If you want to use these on the vehicle and plug them into the 4-pin on the trailer you would not have the running lights on your trailer. Also it sounds like you are having an issue with the trailer wiring connector on your vehicle anyway if the trailer lights are not lighting up. I recommend to check the 4-pin wiring on the 2019 Land Rover Discovery for any damaged or frayed...
view full answer... - Troubleshooting Hopkins Magnetic Tow Lights that Dont Want to Power OnIn order for the # C6304 to function you would need to make sure that the batteries are installed properly in the light kit as well as make sure the power switch is turned on. This switch is at the bottom of one of the lights in a recessed opening. Check out the video I attached that covers everything on these lights if you have further questions. Or you can email me back if you are still having troubles.
view full answer... - Magnetic Tow Bar Lighting Kit Recommendation with Magnetic BaseFor a magnetic set of LED tow bar lighting the Hopkins part # C6304 is a great option. But you should note that this is a wireless kit that requires batteries (lithiums to be specific). These have a stronger magnet and are LED.
view full answer... - Battery Life of Hopkins Wireless Magnetic Tow Lights # C6304We've been told that the battery life of the Hopkins wireless magnetic tow lights, # C6304 should be right at 2 hours. But if you use lithium batteries you should easy get double that!
view full answer... - How to Use the Hopkins Magnetic Tow Lights on a 2022 Volkswagen ID.4It sounds like you are plugging the Hopkins Magnetic Tow Lights # C6304 into the 4-way on your 2022 Volkswagen ID.4. There are some vehicles that do not sense the lights because they do not draw enough power. This would explain why everything works with your neighbors trailer connected. The trailer is pulling enough for your vehicle to sense it. The Hopkins Magnetic Tow Lights # C6304 has a transmitting distance of 65'. The easiest way to correct this would be to connect the transmitter...
view full answer... - Hopkins Magnetic Tow Lights, 4-Way Flat Connector - WirelessThe Hopkins Magnetic Tow Lights - Red LEDs - 4-Way Flat Connector - Wireless, # C6304, is sold as a kit only.
view full answer... - Can Magnetic Tow Lights be Used at Same Time Tow Dolly TaillightsYes, if you added a 4-way to the 7-way trailer wiring of your tow vehicle you could use the Hopkins magnetic tow lights part # C6304 that you referenced and the tow dolly taillights will still function as well. To easily add a 4-way you could use the part # 118384 which will plug inline with your 7-way.
view full answer... - Will the Tekonsha T-One # 118461 Carry the Emergency Flasher Signal on a 2009 Subaru Outback WagonYes, the Tekonsha T-One # 118461 uses a standard 4-Way Flat connector which carries running lights, left brake/turn signal, right brake/turn signal, and the ground. The flasher signals would draw off both the left brake/turn signal and the right brake/turn signal. This is a confirmed fit for your 2009 Subaru Outback Wagon and I have attached an installation video for you to reference. If you don't already have lights I recommend the Hopkins Magnetic Tow Lights # C6304. These don't connect...
view full answer... - Can a 1995 GMC C/K Series Pickup Be Towed Behind Another VehicleIt is possible to flat-tow a 1995 GMC C/K Series Pickup. However, you will need a lube pump if you have a C1500 or you will need to disconnect the drive shaft if you have a K1500 without manual transfer case. In order to flat-tow the vehicle you will need a tow bar like the Curt Tow Bar with Adjustable-Width Arms part # C19745 and a lighting kit like the Hopkins Magnetic Tow Lights part # C6304 at the very least.
view full answer... - How To Flat-Tow a 1996 Jeep Cherokee Using a Pickup TruckI do have an option for you but I am not aware of any way to flat-tow a vehicle using a front mount trailer hitch as there would be no way for the wheels to track properly. The most cost effective option we have for you to attach the Cherokee to your pickup is with the Curt Tow Bar with Adjustable-Width Arms part # C19745. If you don't have a steel bumper on your Jeep to attach this tow bar then you will need to remove the bumper and then attach this to the vehicle's core support. In...
view full answer... - Troubleshooting Running Light Function on Hopkins Magnetic Trailer Lights C6304The Hopkins LED Magnetic Tow Lights # C6304 will provide running light, turn signal and brake light functions, all of which are supported by their 4-pole flat type wiring scheme. Running light signals are carried on the brown wire in 4-pole wiring. If you are not getting that function on the lights you can check that the four batteries in each light are all good and that the pin on your vehicle 4-pole does not have any corrosion on it that could be blocking the signal. If you have a circuit...
view full answer...
- Availability of Plug-In Tow Bar Wiring Kit for 2020 Jeep Wrangler UnlimitedI do have a great lighting solution for you, however the Hopkins Custom Tail Light Wiring Kit # HM56200 that you referenced won't work on your 2020 Jeep Wrangler Unlimited. This custom harness is designed to fit earlier model Wranglers (up through the 2018 model year) and isn't compatible with the new generation. There isn't a similar custom plug-in harness available for your Jeep. If you'd rather not splice into the factory wiring on the vehicle (which I can certainly understand) another...
view full answer... - Does Heat Affect Hopkins Magnetic LightsThank you for your purchase directly from etrailer of the Hopkins Magnetic Tow Lights # C6304. It may be possible for extreme heat to affect any electronics, though it's impossible to say if that is the cause. Since you already tested the lights and it shows a connection, really the only thing to do is get a replacement, there isn't a fix for this. It does have a 90-day warranty, though if that is out I would consider something more robust, like the lifetime warranty that comes with the...
view full answer... - Can Trailer Wiring and Tow Bar Wiring be Installed at Same Time on 2011 Honda CR-VThe trailer wiring harness you have installed with the Hopkins tow bar wiring harness part # HM56300 that you referenced is your issue. If you want the # HM56300 to be functional you'll need to remove the trailer wiring harness. Another option would be to leave the trailer wiring installed and use a temporary wiring kit for flat towing wiring like the part # C6304 which is magnetic and attaches to the top of the vehicle.
view full answer... - Hopkins Wireless LED Brake Light Works on One Side OnlyIf you have installed new batteries into the Hopkins Magnetic Tow Lights # C6304, then you should not be experiencing both turn signals working but only one brake light working because the turn signals run along the same wire that the stop signal does. You can start off by checking your connectors to ensure that they are clean and free of debris. If that checks out then what I recommend doing is using an alternate 12V power source to test the magnetic tow lights. You can either use a different...
view full answer... - Tow Bar Wiring Recommendation for a 1999 Toyota 4RunnerThere aren't any confirmed tow bar wiring fits available for your 1999 Toyota 4Runner currently, but I did attach an FAQ article that details how to pick the best wiring kit for your application. If you were looking for an easily installed an removed kit I would go with a magnetic kit like Hopkins # C6304. Bulb and socket kits like the part # RM-155 could work as well as long as you have room for the bulb in your taillight housing. These kits install by drilling a hole in the taillight...
view full answer...
Do you have a question about this Tow Bar Wiring?
Info for this part was:
Edited by:
Leah B
Video Edited:
Zack K
Video Edited:
Dustin K
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video by:
Patrick B
Installed by:
Matthew K
Installed by:
Cole B
Installed by:
Bradley B
Written by:
Rachelle B
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Daron K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
John K.
1/15/2018
Still works great. Save us on a trip when the car to RV connection went [bad].