E-Z Mount Tow Light Kit, 20 ft. Long Cord

Custer Tow Bar Wiring - EZT20B

A convenient solution for all your towing needs. Easy hook up and removal. 20 foot cord included.

• Hinged flaps easily hook into trunk of car in tow
• Durable, non-scratch plastic flaps
• 20' Cord with 4-pole trailer end
• Lights have a 60" span

Customers compare EZT20B to these similar products

Magnetic Towing Light Kit, 20 ft. Long Cord$41.95

Roadmaster Deluxe Magnetic Tow Lights - 4-Pole Round Connectors$87.95

RoadMaster Standard Magnetic Tow Lights$54.95

Roadmaster Tail Light Wiring Kit with Bulbs$49.95

Tail Light Isolating Diode System with Wiring Harness$31.60

Customers Who Purchased This Tow Bar Wiring Also Bought...

Bonded 4 Wire - per foot $0.57

RoadMaster Tracker Tow Bar - 5,000 lbs $229.00

RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs $44.95

Wire Loom, 1/2" Diameter (per Foot) $0.34

Tow Ready Adjustable Tow Bar, 5,000 lbs $154.95

Ask the Experts about this Custer Tow Bar Wiring
Do you have a question about this Tow Bar Wiring?

• Does Battery Need To Be Disconnected When Flat Towing A 2011 Ford Fiesta Automatic
  
• It is recommended to disconnect the battery on your 2011 Ford Fiesta automatic when it is being flat towed. Your vehicle has a feature that will not allow the battery to be discharged while it is being towed, so you should not have to go through the whole procedure you mentioned to reset the vehicles presets. The Roadmaster - Auto Battery Disconnect, part # RM-765, can be used on your vehicle, but it is not recommended. The Roadmaster battery disconnect, part # RM-765, receives a charge from
  view full answer...


• Can the Honda Fit Be Flat Towed Behind a Motorhome
  
• The information that we have is that the Honda Fit Automatic is towable as is for the 2007 to 2011 model years. If you have a 2012 model or If you would like to let me know the year of your Honda Fit, I would be glad to check to see if it is towable or not, or you can check your vehicle owners manual to determine the towability and pre tow procedures for your specific vehicle. Honda vehicles have special procedures for towing so you should check your owners manual. The items needed to tow you
  view full answer...


• What is the Length of the Flap on the E-Z Mount Tow Light Kit from Inside of Hook to Corner Fold
  
• I went to the warehouse and pulled the E-Z Mount Tow Light Kit, # EZT20B, to measure for you, see video link. The measurement from the hook that sits inside the trunk lip to the 90 degree angled corner on the flap is 3-3/4 inches. The E-Z Mount kit can be used in many positions, including the position you referenced. I added a photo showing a couple of alternate applications that you may find helpful. If this light kit will not work on your Cabrio, I checked with Blue Ox and they recommend
  view full answer...


• Lighting Functions and Extension Cable for the E-Z Mount Tow Light Kit
  
• The E-Z Mount Tow Light Kit, # EZT20B, provides stop, turn and taillight functions for flat towing. If you need an extension There are several options depending on the length that you need. If 48 inches would be long enough you can use the 48 inch Car and Trailer End Loop, # 18044. If 60 inches is needed use the 60 inch Car and Trailer End Loop, # 18045. If you need a custom length wire you could purchase a 4-Pole Trailer End Connector, # 18004, which is 12 inches long, a 4-Pole Vehicle End c
  view full answer...


• Using E-Z Mount Tow Light Kit, # EZT20B, with a Tow Dolly Already Connected to RV Trailer Connector
  
• The Roadmaster Tow Dolly with electric brakes, # RM-2000-1, also already has lights on it which is why they did not provide an additional socket for lights. It also has a 6-Way round pin trailer connector and not a 7-Way. Since your RV has a 7-Way, you can use the Hopkins mutli-tow adapter, # HM47570. This connector will allow you to plug in the 4-Way on the E-Z Mount Tow Light Kit, # EZT20B. but you have to consult the RV owners manual to determine if it can handle the power draw from tow d
  view full answer...


• Is Roadmaster Diode Wiring Kit # RM-154 Needed When Flat Towing a 2013 Ford Fiesta
  
• The battery needs to be disconnected when flat towing a 2013 Ford Fiesta with the automatic transmission because the transmission is shifted electrically. If the battery is left connected it could shift the transmission into the wrong gears when being flat towed and damage the transmission. The manual transmission of the Fiesta does not require disconnecting the battery. The diode kit like the Roadmaster Diode Wiring Kit, part # RM-154, is used to connect your lighting on your RV to the light
  view full answer...


• Parts Needed to Flat Tow a 2013 Honda Fit Sport Automatic Behind a Motor Home
  
• The best place to check to see if a vehicle can be flat towed behind a motor home is the owners manual. I found one online for the 2013 Fit from Honda and it states that you can tow the vehicle behind a motor home. There are special instructions for the automatic transmission you will want to look at so be sure to check your owners manual. You will need 5 items to flat tow your fit. First you will need base plates, # BX2253. These provide a safe mounting location for a tow bar. For a compatib
  view full answer...


• Is a Honda 2013 FIT Flat Towable
  
• I have a copy of the Fit Online Reference Owners Manual that I found online, and on page 159, it states that both manual and automatic transmission equipped Fit models can indeed be towed behind a motorhome of the specific procedures shown are followed. You can find this by doing a Google search on '2013 Honda Fit Owners Manual'. I looked through several online forums, and saw several references stating that the 2013 Fit can be flat towed. I would recommend checking directly with Honda for
  view full answer...


• Parts Needed to Flat Tow a 2007 Honda Fit Behind a Motor Home with an Aventa Tow Bar
  
• In order to determine if your 2007 Honda Fit can be flat towed behind a motor home you will want to consult the vehicle owners manual. Since you have an automatic transmission you will need to use base plates # 521558-1. Blue Ox does not have a base plate kit for the automatic transmission models. You can still use your Aventa tow bar by using adapter # BX88178. If you need safety cables, use # RM-643. For a lighting solution I recommend the TowDaddy harness # TD10000S. Most states now re
  view full answer...


• Parts Needed to Flat Tow a 2007 Honda Fit Behind a Motor Home
  
• First, be sure to consult the Fit owners manual to determine if and how your Fit should be towed. Yes there are base plates for the 2007 Honda Fit from Blue Ox but only if it is a manual transmission. You would use # BX2252. For a compatible tow bar I recommend the Aventa # BX7445. It also comes with safety cables. For a lighting solution I recommend the TowDaddy wiring harness # TD10000S. Most states now require a supplemental baring system on the vehicle being flat towed. I recommend th
  view full answer...


• Wiring Tail Lights on a 2005 Jeep Wrangler to Tow behind a 2008 Nissan Xterra
  
• We have exactly what you are looking for. The Tail Light Isolating Diode System with Wiring Harness, part # 38955, is used when you want the towed vehicle lighting system to work with the tow vehicle. There is also a video on how to install the kit that I have linked below.
  view full answer...


• Parts Needed to Flat Tow a 2011 Ford Fiesta With a 35 ft. Fleetwood Bounder Gas
  
• For your 2011 Ford Fiesta, you will need several items to complete a flat towing setup. The first item will be a base plate kit. The Roadmaster EZ2 Base Plate Kit, item # 524425-1 is the correct kit for the 2011 Fiesta. You will then need a tow bar to attach to the base plates on the Fiesta and to the Bounder. If your motor home has a receiver hitch, I would recommend the RoadMaster Falcon 2 Tow Bar, item # RM-520. If you have a hitch ball on the back of your RV, I would recommend RoadMaster
  view full answer...


• Can a 2011 Ford Fiesta Automatic be Flat Towed Behind a Motor Home
  
• I did some checking and it looks like a 2011 Ford Fiesta with an automatic transmission is good to tow as is. However, you should check with the owners manual to check for any limitations or recommendations. You will need a few things to accomplish this, the first thing being a Roadmaster EZ2 Base Plate Kit, part # 524425-1. This will install onto your Fiesta and be the attachment point from the tow bars. Next, you will need a RoadMaster Sterling All Terrain Tow Bar, part # RM-576 and safety
  view full answer...