Tires and Wheels > Tire with Wheel > Bias Ply Tire > 12 Inch > 5 on 4-1/2 Inch > Load Range C > Steel > 5.30-12 > Kenda

Kenda 5.30-12 Bias Trailer Tire with 12" White Wheel - 5 on 4-1/2 - Load Range C

Rating: rating rating rating rating rating
43 reviews

Code: AM30820

Price:$66.95

Shipping Weight: 22 pounds

Shipping Special

Orders of $150 qualify for free shipping.
Lowest Price Pledge

Quantity:

Kenda Tires and Wheels - AM30820

Bias tire has a ply rating of 6 and a 1,045-lb maximum load at 80 psi. The 12" diameter x 4" wide steel trailer wheel features a 5 on 4-1/2 bolt pattern and a corrosion-resistant powder coat finish.

Features:

Trailer tire by Kenda is designed for excellent handling at high speeds
8-Spoke steel wheel by Dexstar
- Resists rust with e-coat and white powder coat finishes
Tire-and-wheel assembly meets Department of Transportation specifications

Specs:

Rim dimensions: 12" diameter x 4" wide
Bolt pattern: 5 on 4-1/2"
Wheel capacity: 1,250 lbs at 90 psi
Wheel bolt size: 1/2"-20
Pilot diameter: 3.19"
Tire size: 5.30-12
- Section width: 5.6"
- Outer diameter: 21.9"
Tire capacity:
- Load range: C
- Ply rating: 6
- Maximum load: 1,045 lbs at 80 psi
Limited 2-year warranty

Note: The overall capacity of this tire-and-wheel assembly is limited to the lowest rated component. Do not fill your tire to a pressure greater than that indicated on the tire itself or on the wheel that it is mounted to.

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.