Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Your typical tire chain, but better. The CB12 offers color coded attachment points to make installation easy. D-Shape links provide excellent traction. Alloy steel construction is durable and corrosion resistant. Requires 12 mm of clearance.
Features:
Specs:
Thule's CB12 snow chains provide an affordable way to enhance safety on icy, snowy roads. These chains are handmade in Italy of hardened manganese nickel alloy steel for ultimate durability. The dual-sided, 12-mm-diameter, D-shape links provide superior traction for excelletnt grip on snow and ice. The included tensioning device eases installation. Just pull the rubber strap taut to tighten the chain for a perfect fit.
Included with each pair of chains are mounting instructions, a kneeling mat and a pair of gloves, all packaged in a sturdy, reusable container.
To choose the right snow chains, you must match your tire size. Those measurements can be found on the side of your tire, as shown below.
185/60-15
These chains fit the following tire sizes:
Video of Thule Standard Snow Tire Chains for Passenger Vehicles - CB12 - Size 095
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Today we are going to show you part number TH01221102 from Thule. This is their CB12 tire chains. As you can see here, the chains come in a handy carrying case. I have one of the chains in the center also you have a package with some gloves that you can wear over your mittens and whatnot to keep them dry while you are putting the chains on. Also there is an extra pair of links so in the unlikely event that you break a chain you can fix it rather easily. Also there is a kneeling mat so you do not get your knees wet while you go ahead and install the chains. A few quick notes about these. It does feature color-coded connection points to ease installation. A plastic-covered cable runs from behind the tire to allow you to move the chain without moving the car. The links themselves are a dual-sided D-shape that provides greater traction. And also this will not mess up anything with anti-lock brake systems or electronic stability control systems. It is really designed for passenger-type vehicles. We will go ahead and show you how it fits and how it installs on a typical tire.
To install the chain, run it behind the tire and then bring the blue cable behind the tire and hook them up at the top. Then pull your chains from the back side up to the front, and your red loop here on the end will connect to this red hook here. Then kind of push the blue cable back behind the tire. And then this chain here at the bottom will go through this tensioner here. Hook it through this other loop here. And then this part you want to hook this end up as close to this red hook as possible, somewhere on this part of the chain. Okay, and you have them installed.
All right, to remove the chains, reverse the same procedure. Disconnect it, undo this, and then on top here with the hook, pull the blue part back in and just let it fall to the ground. And part of the chain might be trapped underneath the tire, so just let it sit wherever and just drive backward or forward, whichever is easier, to retrieve your chains. And there you have it for part number TH01221102 from Thule, their CB12 tire chains.
Ask the Experts about this Thule Tire Chains
Do you have a question about this Tire Chains?
Pontiac Bonneville Accessories
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
