Multi-Fit Motor Home Trailer Hitch, 47" - 71" wide

Hidden Hitch Specialty Trailer Hitches - 82201

Motorhome (RV) Hitch

Frame brackets are adjustable to fit a variety of frame widths.

• Adjusts from 47" to 71" wide
• Rated for 3,500 lbs GTW, 300 lbs TW

Note: This is a general application product, and it is the responsibility of the installer to select a structurally safe location for attachment. For use with RV-approved accessories only.

Customers Who Purchased This Specialty Trailer Hitches Also Bought...

Bonded 4 Wire - per foot $0.57

Jacketed 2 Wire, 10 Gauge, Brake Wire - per Foot $1.21

Wire Frame Clip $0.17

Metal Loom Clamp -1/4" $0.57

American Flag 2" Trailer Hitch Receiver Cover $14.95

Ask the Experts about this Hidden Hitch Specialty Trailer Hitches
Do you have a question about this Specialty Trailer Hitches?

• Will a Receiver Hitch Work on an I-Beam Frame on My 5th Wheel Trailer
  
• I do not believe the 82201 Multi-Fit Motor Home Hitch is the best option for your I-beam frame. We have an adjustable width trailer hitch for the RV, part number 13703, that would most likely work better. With this hitch you would be able to install the brackets on the inside of the I-beam and would have 6 bolts holding it in place providing a much larger mounting surface than the other hitch. The distance from the bend in the mounting plates where it sits on the I-beam to the top of the cro
  view full answer...


• What Is Dimension From Top of Frame Bracket to Center of Receiver On The Hidden Hitch, # 82201
  
• I went out to the warehouse and measured the Hidden Hitch Multi-Fit Hitch, # 82201. The dimension from top of the frame bracket flange to the center line of the 2 inch receiver is 3-1/2 inches. The dimension from the front of the frame bracket to the front of the 2 inch receiver is 4-1/8 inches. I am sending a link to the instructions on the hitch.
  view full answer...


• Will a Trailer Hitch Fit On A 2011 Jayco 256RKS Trailer Rear Bumper
  
• The Hidden Hitch, # 82201, is a frame mount hitch. It is designed to be installed to the trailer frame for it to be rated for 3,500 lbs. gross towing weight and 300 lbs. tongue weight. It is not designed to attach to an RV bumper. You can measure on your Jayco trailer to determine if the Hidden Hitch, # 82201, will install to your trailer frame. The frame brackets will fit frame widths from 47 inches to 71 inches. To determine how far from the ground the receiver would be is the dimension
  view full answer...


• Availability of a Trailer Hitch to Fit a 72 Inch Wide Frame on a Keystone Passport Travel Trailer
  
• The widest RV style specialty trailer hitch we have is the Adjustable Width Trailer Hitch Receiver, # 13703. The max width frame this trailer hitch will fit is 72 inches. This is a bolt on or weld on trailer hitch. If you need to have it welded on, it should be done by a qualified welder in a shop that works on trailers. I have included a link to the installation details below. If you are able to install this hitch on your Keystone Passport, make sure that you use a bike rack rated for use be
  view full answer...


• RV Mounted Trailer Hitch Recommendation for a 2004 Montana 5th Wheel Trailer
  
• We have numerous RV and travel trailer hitches available, but the most versatile one would have to be the Curt Adjustable Width Trailer Hitch Receiver, # 13703. This trailer hitch will fit on frames ranging from 22 inches wide to 72 inches wide. It will also fit on box frames, C-channel frames, or I-Beam frames. And, the side brackets can be welded or bolted on. The hitch has a tongue weight capacity of 350 pounds, so it will be able to hold the weight of your 200 pound generator and a carri
  view full answer...


• 1992 Chevrolet 30 Foot Mallard Class C Motorhome Trailer Hitch Recommendation
  
• Since the frame on your Class C Motorhome is 43 inches outside width you will need one of two hitches for your application. The Hidden Hitch Multi-Fit Motorhome Trailer Hitch, 31 - 46 inches wide, item # 82200, or the Curt Mfg. Adjustable Width Trailer Hitch Receiver for RVs, 22 to 72 inches Wide, item # 13703, are the two choices I would consider. Of the two the Hidden Hitch receiver is the one I would choose, if the mounting brackets will work with the frame on your Motorhome, because the w
  view full answer...


• Recommendation for a Trailer Hitch for a Jayco 27.5 RKS Fifth Wheel Trailer with I-Beam Frame
  
• We do have an RV mount trailer hitch that is designed to be compatible with I-beam trailer frames. It is the Adjustable Width Trailer Hitch Receiver, # 13703. This hitch fits frames from 22 inches wide to 72 inches wide and will fit box, c-channel, and I-beam frame styles. This hitch can also be bolted or welded on. If you choose to weld it on, any welding should be done by a qualified professional welder. I have included a link to the installation instructions for this hitch for you to view.
  view full answer...


• Trailer Hitch Recommendation for a 2005 Cedar Creek 5th Wheel Trailer
  
• I do believe I have just the right trailer hitch for your 5th wheel trailer. Take a look at the Curt Adjustable Width Trailer Hitch Receiver, # 13703. It will fit trailer frames up to 72 inches wide and it is compatible with I-Beam frames. The hitch can be welded or bolted to the trailer frame. If you choose to have it welded on, it should be done by a qualified professional welder. I have included a link to the installation details for you to view. Just a quick word of caution; I advise agai
  view full answer...


• What are the Dimensions of the Mounting Bracket for Hidden Hitch Trailer Hitch # 82201
  
• On the Multi-Fit Motor Home Trailer Hitch, # 802201, the top of each of the side mounting brackets measures 10 inches long by 2 inches wide. The bolt holes are 8-1/2 inches apart from center to center. The brackets are about 5-5/8 inches tall at the tallest point. I have included a link to the installation instructions for you to view. Another option is the Adjustable Width Trailer Hitch Receiver, # 13703. This hitch can mount to I-Beam, C-Channel, or box frames. It can also be welded or bolt
  view full answer...


• Receiver Hitch Recommendation for a 1992 Thor Pinnacle Class A Chevroler Motorhome
  
• For your application I would recommend the hitch with the highest gross trailer weight, and tongue weight rating. Determining the width of the frame on your motor home will allow you to select the hitch that will be the best match for your towing needs. The hitch you selected, # 82201, has a 3,500 pound gross trailer weight rating and 300 pound tongue weight rating. The ratings are lower on this hitch because of its extra width. If you could possibly select a hitch designed for a smaller fram
  view full answer...


• What are the Mounting Bracket Dimensions for Trailer Hitch # 82201
  
• I have actually measured this hitch before. I can tell you that the top of each of the side mounting brackets measures 10 inches long by 2 inches wide. The bolt holes are 8-1/2 inches apart from center to center. The brackets are about 5-5/8 inches tall at the tallest point. I have included a link to the installation instructions for you to view. If you are looking for a hitch to fit an RV or trailer, another option is the CURT Adjustable Width Trailer Hitch Receiver, # 13703. This hitch can
  view full answer...


• What is the Widest Setting and Bolt Hole Measurement for Multi-Fit Trailer Hitch # 82201
  
• The max width the multi-fit motorhome trailer hitch # 82201 will fit is 71 inches. That is measured from the outside of one frame rail to the outside of the other frame rail. I have included a link to the installation instructions for you. You need to measure your frame rails to determine fit. When set at its widest point the bolt holes are approximately 69 inches apart on center.
  view full answer...


• Multi-Fit Motor Home Trailer Hitch Dimensions
  
• The top plate of the mounting flange on the Multi-Fit Motor Home Trailer Hitch, 47 inches - 71 inches wide, part # 82201, is 10 inches long and 2 inches wide, and the bolt holes are 8-1/2 inches apart from center to center. The flange is about 8-5/8 inches tall at the biggest portion of the flange.
  view full answer...