Multi-Fit Motorhome Trailer Hitch, 31" - 46" wide

Hidden Hitch Specialty Trailer Hitches - 82200

Motorhome (RV) Hitch

Frame brackets are adjustable, fitting a variety of frame widths.

• Trailer hitch has 2" x 2" receiver opening
• Adjustable brackets from 31" to 46" wide
• Weight rating: 5,000 lbs GTW, 500 lbs TW
  • 6,000 lbs GTW, 750 TW with weight distribution
• Measures 2" from the attachment points down to the top of receiver opening

Note: This is a general application product, and it is the responsibility of the installer to select a structurally safe location for attachment. For use with RV-approved accessories only.

Customers compare 82200 to these similar products

Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide$321.40

Reese Multi-Fit Motorhome Hitch, 34" to 46" Wide$232.95

Multi-Fit Motor Home Trailer Hitch, 47" - 71" wide$298.95

RV Bumper 2" Trailer Hitch Receiver$77.62

Class IV Weld-On Ultra Frame Trailer Hitch Receiver by Draw-Tite, Hidden Hitch and Reese$128.95

Customers Who Purchased This Specialty Trailer Hitches Also Bought...

Pintle Hook Mount, 7-1/2" Tall, Long Shank, 12K $56.95

American Flag 2" Trailer Hitch Receiver Cover $14.95

Customer Reviews

Multi-Fit Motorhome Trailer Hitch, 31 - 82200

Average Customer Rating:  4.6 out of 5 stars   (5 Customer Reviews)

- 82200

by: Steve C.03/28/2011

Is this review helpful?

Great service from etrailer, super fast shipping. Nice Hitch, easy install, took about 4 hours.10527

comment on this review

Ask your question or add a comment to this product review?

Name: (example: John S.)

Contact email:

* please make sure your email address is correct (should look like name@domain.com)

Comment

Yes, I would like an email notification if someone replies to my comment?   

Click to Enlarge

- 82200

by: Tom03/04/2013

Is this review helpful?

Much more solid than I thought. The only problem I had was getting 9/16" holes in the cross bars. Not many shade tree mechanics have a 9/16" drill bit and drill motor to drive it. I think the 4- 9/16 bolts are unnecessary as the whole unit is bolted to the frame with 4- 1/2" bolts. Unit looks nice and sturdy. 68786

comment on this review

Ask your question or add a comment to this product review?

Name: (example: John S.)

Contact email:

* please make sure your email address is correct (should look like name@domain.com)

Comment

Yes, I would like an email notification if someone replies to my comment?   

- 82200

by: Jon C.08/19/2011

Is this review helpful?

I think this should include not only a product review but also my interaction with e.trailer.com. The experience has been the easiest I have had in on-line buying. The product arrived as expect and in undamaged condition. The hitch is high quality product with no "wants' on my part. Every thing needed was included. I would buy another hitch from them but I don't think they make one for a bicycle. 22280

comment on this review

Ask your question or add a comment to this product review?

Name: (example: John S.)

Contact email:

* please make sure your email address is correct (should look like name@domain.com)

Comment

Yes, I would like an email notification if someone replies to my comment?   

Click to Enlarge

- 82200

by: Stephen P05/20/2011

Is this review helpful?

Just what I needed. Deliver was on time. Install took about 2 hours, no big problems Now I am ready to head to the river.14877

comment on this review

Ask your question or add a comment to this product review?

Name: (example: John S.)

Contact email:

* please make sure your email address is correct (should look like name@domain.com)

Comment

Yes, I would like an email notification if someone replies to my comment?   

- 82200

by: Michael P12/30/2010

Is this review helpful?

Great Job By a Great Company I needed a trailer hitch for my class "C" motorhome luckly i stumbled upon a well done website lots of good products with lots of detailed info made a phone call to their shop reassured product was right one I ordered online given super price plus upgrade on delivery time {No Charge!) then tracking e-mails all good stuff Plus it arrived when promised cant wait to complete installation and use...Thank You Etrailer.com4805

comment on this review

Ask your question or add a comment to this product review?

Name: (example: John S.)

Contact email:

* please make sure your email address is correct (should look like name@domain.com)

Comment

Yes, I would like an email notification if someone replies to my comment?   

Ask the Experts about this Hidden Hitch Specialty Trailer Hitches

• Installation Instructions for Mounting a Multi-Fit Motorhome Trailer Hitch
  
• This is a general application product, therefore no vehicle-specific instructions are available. Hidden Hitch does provide some general installation guidelines, which I will link you to. It is the responsibility of the installer to select a structurally safe location for attachment. The hitch can be bolted or welded into place, but a qualified welder would need to preform the work.
  view full answer...


• Mounting Hole Distance on the Multi-Fit Motorhome Trailer Hitch
  
• The mounting holes on the Multi-Fit Motorhome Trailer Hitch, 31 - 46 inches wide, part # 82200, are about 8-1/2 inches apart, center to center.
  view full answer...


• Fifth Wheel Trailer Hitch for Carrying a Bike Rack
  
• This can be done; the application you selected, (82200), will fit a range of 31 inches to 46 inches wide and is for motor homes/RVs. It is a Class III hitch. It also has side mounting brackets, or can be welded to your existing trailer. Any bike rack behind a 5th wheel will bounce around a lot; you may want to consider a RV/Camper bike rack since it may be particularly hard on the welds. For your reference, I will link you to the web pages listing the bike racks for Class III hitches; you c
  view full answer...


• Installation of the Multi-Fit Motorhome Trailer Hitch, Item # 5350, No Welding Required
  
• Welding is not required for installation of the Multi-Fit Motorhome Trailer Hitch, item # 82200. Once you have the tube cut to length, be sure it is centered on the vehicle, you will need to drill 1/2 inch holes in the cross tube to secure it to the brackets. There are holes in the receiver portion of the brackets to use as a template for drilling the cross tube (see instructions).
  view full answer...


• What Hitch Will Fit my 1981 Fleetwood Tioga Motorhome
  
• You will need to measure the frame on the motorhome to see how wide it is. We have several adjustable motorhome hitches to accommodate many frame widths. The part you were looking at will fit 31-46 inch wide frames and will bolt to the underside of the frame. The most versatile is Curt RV hitch part # 13703. It will accommodate frames from 22 inches to 72 inches wide and will fit box, C-Channel or I-Beam frames. I will include a link to the product page and the instructions.
  view full answer...


• Will Hidden Hitch Multi-Fit Trailer Hitch 82200 Fit My 1986 Winnebago LeSharo
  
• It very well could. The hitch can be mounted to motor homes with 31-46 inch wide frames. You will need to measure your motorhome frame to see how wide the two frame rails are. Curt Manufacturing offers an Adjustable Width Trailer Hitch Receiver for RVs, part # 13703 will mount to frames that are 22-72 inches wide. I will also provide a link to the installation instructions.
  view full answer...


• What is the Mounting Hole Spacing for Motorhome Hitch 5350
  
• Motor home hitch # 82200 features two holes on each side bracket for mounting the hitch to your frame. The bolt holes are spaced 8-5/8 inches apart, center to center, and are 1/2 of an inch in diameter. I have included a link to the installation instructions for the hitch.
  view full answer...


• Trailer Hitch for a 2001 Keystone Montana 32 Ft 5th Wheel Trailer
  
• You will need to measure the outside to outside frame measurement on your 2001 Keystone Montana 5th wheel trailer to determine if the multi-fit motorhome trailer hitch # 82200 will fit. This hitch will fit on frames that are 31 to 46 inches wide. I have included a link to the installation instructions for you to view that will also help to determine fit. Another key measurement is from the bottom of the frame where the hitch attaches to top of the receiver. On this hitch it is 2 inches. If you n
  view full answer...