Draw-Tite Specialty Trailer Hitches - 41990-16
Class IV Weld-on Ultra Frame 44" Trailer Hitch Receiver with
16" Mounting Bracket
- Features:
- Designed for service body trucks and utility body trucks
- Strong, secure, heavy-duty side bracket design
- Black powder coat finish
- All-frame attachment
- Solid construction for maximum strength and safety
- Perfect fit and top towing performance assured
- Computer-aided design and fatigue stress testing
- Nationwide limited lifetime warranty
- Specs:
-
- 44" wide trailer hitch receiver
- 16" tall bracket kit must be welded onto hitch and tow vehicle
- 2" square receiver tube opening
- GTW capacity rated up to 16,000 lbs
- Tongue weight capacity rated up to 1,600 lbs
41990-16 Class IV Weld-On Ultra Frame Trailer Hitch Receiver and
Bracket Kit by Draw-Tite, Hidden Hitch and Reese
Customers Who Purchased This Specialty Trailer Hitches Also Bought...
Ask the Experts about this Draw-Tite Specialty Trailer Hitches
Do you have a question about this Specialty Trailer Hitches?
- Is Draw-Tite Ultra Hitch part 41990-16 an Adjustable Width Hitch for Motor Homes
- The Class IV Weld-On 44 Inch Hitch, part # 41990-16 is not adjustable. However, we do carry such hitches.
You could use hitch part # 41991 if you need wider than 44 inches and if you need a more narrow setup, you could use part # 41990. You would then use either 7 inch tall hitch brackets part # 4907 or 16 inch tall brackets part # 4916, depending on far below the frame you need the hitch to sit.
view full answer...
- Does the Draw-Tite Class IV Weld-On Hitch, Part # 41990-16 Need to Be Welded Together
- The Draw-Tite Class IV Weld-On Hitch, part # 41990-16 ships in three pieces that need to be welded together.
view full answer...
- Reese Trailer Hitch # 41940 Recommendation for a 2001 Ford F-550 Cab and Chassis
- If you have a 34 inch wide frame I would recommend that you get a Reese Trailer Hitch, part # 41940. This hitch is specifically designed to work on a Cab and Chassis 2001 Ford F-550 like what you have.
You may need the following items to complete your towing setup:
Forged Ball Mount 3 inch Rise or 4 inch Drop, part # 40331
Hitch Ball with 2 inch Diameter and Medium Shank, part # A-90
Hitch Ball with 2-5/16 inch Diameter and Medium Shank, part # 19286
view full answer...
