Curt 2" Bumper Hitch, 5,000 lbs GTW

Curt Specialty Trailer Hitches - E-3S

Curt Bumper Mount Trailer Hitch

• Has 2" square receiver opening, ideal for hitch accessories such as bike racks and cargo carriers
• Bolts to the rear of pick-up step bumper
• Bolt pattern width on center 8-3/4"
• Side to side width: 14"
• Distance from front of receiver opening to back of plate: 6"
• Plate length from front to back: 4"
• Offers lower hitch point to provide level trailer towing
• Powder coat finish resists corrosion
• Includes mounting hardware
• Weight capacity: 5,000 lbs GTW / 500 lbs TW

Note: Never exceed your bumper's gross towing weight.

Customers compare E-3S to these similar products

RV Bumper 2" Trailer Hitch Receiver$77.62

RV Bumper 2" Trailer Hitch Receiver - Clamp-On$54.00

Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers - 3,500 lbs$54.95

Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide$321.40

Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" Bumpers$24.95

Customers Who Purchased This Specialty Trailer Hitches Also Bought...

Americana Trailer Wheel Lug Nut - 13/16" Diameter - Stainless Steel - 1/2" - 20 $1.49

Pin and Clip For Class III, IV and V Trailer Hitch Receiver $5.16

Ball Mount 3/4" Rise or 2" Drop, 7,500 lbs $17.20

Wire Frame Clip $0.17

Shackle Strap - 2" Long $0.70

Ask the Experts about this Curt Specialty Trailer Hitches
Do you have a question about this Specialty Trailer Hitches?

• Will Curt 2 Inch Bumper Hitch Fit a 2002 Dodge Ram 1500
  
• Part E-3S has a 8-3/4 inch, center to center, span between mounting holes. Check your bumper to see if it has two holes that are 8-3/4 inches apart. These are universal fit items so they do not fit specific vehicles.
  view full answer...


• Will the Curt 2 inch Bumper Hitch Fit On a 2000 GMC Jimmy
  
• If you 2000 GMC Jimmy has a rear step bumper and the mounting hole spacing is 8-3/4 inches on center then the Curt 2 inch Bumper Hitch, item # E-3S, will work on your vehicle. The towing capacity of the hitch will be the lowest rated item in the system which are the vehicle, bumper or hitch itself, whichever is lowest. You can find the towing capacity either in your owners manual and/or on the bumper itself. The Curt 2 inch Bumper Hitch comes with all of the mounting hardware and instructions
  view full answer...


• Will the Step Bumper Trailer Hitch # E-3S Fit a 1994 Jeep Cherokee Sport
  
• Part # E-3S has a 8-3/4 inch, center to center, span between mounting holes. Check your bumper to see if it has two holes that are 8-3/4 inches apart. These are universal fit items so they do not fit specific vehicles. If you find that the # E-3S, bumper hitch will not work on your Cherokee we have several frame nount hitches that will work (see link). I would recommend the Curt Class III Trailer Hitch, item # 13084, for your vehicle. The Class III trailer hitch provides more options for towi
  view full answer...


• Will Curt Bumper Hitch Part E-3S Fit a 1999 Ford F-150
  
• If your 1999 Ford F-150 is equipped with a step bumper, then yes this hitch can be used. You may need to drill new holes factory holes do not line up. You can also use a standard frame hitch like part # 87183 or part # 13355.
  view full answer...


• Will the Curt 2 Inch Hitch # E-3S Fit on a 1991 Ford Explorer XLT
  
• We have several trailer hitches designed for the 1991 Ford Explorer. I have posted a link to all of these hitches below. If your 1999 Ford F-150 is equipped with a step bumper, part # E-3S has a 8-3/4 inch, center to center, span between mounting holes. Check your bumper to see if it has two holes that are 8-3/4 inches apart. These are universal fit items so they do not fit specific vehicles. Some items you may need to complete a Class III hitch setup are listed below. Wiring #
  view full answer...


• Can the Bumper Mounted Trailer Hitch be Installed Under the Step Bumper of a 2000 Ford Ranger
  
• I spoke with my contact at Curt, the manufacturer, about the Bumper Mounted Hitch, # E-3S, and the compatibility with your 2000 Ford Ranger. He stated that the total width, side to side, is just under 14 inches. From the front of the receiver opening to the back of the plate is 6 inches. The plate itself measures 4 inches front to back. The hitch can be mounted under the step bumper if you have mounting holes that measure 8-3/4 inches from center to center on your bumper.
  view full answer...


• Towing Capacity of Curt 2 Inch Step Bumper Hitch Part # E-3S
  
• The Curt 2 inch Bumper Hitch, part # E-3S has a 5000 lb towing and 500 lb tongue weight capacity when installed according to the instructions linked below. The Curt Hitch should easily pull your pop-up with no problem whatsoever.
  view full answer...


• Will a Bumper Hitch fit a 1983 Chevrolet el Camino
  
• The 1983 does not use a standard truck bumper, so the Curt E-3S will not work properly. There is a hitch built for your 1983 el Camino that will work. Part # 36104 will fit your el Camino. I have included a link to it and the instructions below.
  view full answer...


• Will Curt E-3S Step Bumper Receiver Hitch fit a 2008 Mazda B2300 Pickup
  
• The Curt E-3S bumper hitch is a universal design to fit standard step bumpers. If your B Series has a standard step bumper it should fit. We have several frame mounted hitches that bolt directly to the frame of the truck and are custom fit to the 2008 Mazda B Series. I have added a link to them below.
  view full answer...


• Will the Curt 2 inch Bumper Hitch # E-3S Fit on a 1996 Buick Roadmaster Sedan
  
• There are two hitches available for the 1996 Buick Roadmaster Sedan (see link). The Draw-Tite Class III Max Frame Receiver Hitch, item # 75146, has a 2 inch receiver opening and is custom built according to the Buick Roadmaster manufacturer and model year to ensure perfect fit and top towing performance. The Curt 2 inch Bumper Hitch, 5,000 lbs GTW, item # E-3S, is designed to bolt to the rear of a pick-up step bumper. There would not be sufficient attachment points to support the hitch on the
  view full answer...


• Willl The Curt Bumper Hitch, # E-3S, Fit On A 2008 Ford F150 Crew Cab
  
• The Curt Bumper Hitch, # E-3S, is made to attach to a truck step bumper. It is a universal fit design so it is not listed for a specific vehicle. The mounting holes are 8-1/2 inches center to center between the holes. If your 2008 Ford F150 Crew Cab has a step bumper and has mounting holes with the 8-1/2 inch dimension then it will bolt to your bumper. If you do not have holes that will line up with the hitch then you can still use the hitch but you would have to drill new holes. The weig
  view full answer...


• Can a Bumper Mounted Trailer Hitch be Used to Tow a 5X8 Trailer with a 2005 Chevrolet Colorado
  
• As long as you stay within the manufacturers tongue weight and gross trailer weight ratings, see bumper and owners manual, you will not have a problem towing with the Curt 2 inch Bumper Hitch, 5,000 lbs GTW, item # E-3S. A better solution for your towing needs would be the Hidden Hitch Class III Trailer Hitch, item # 87458, which is designed specifically for your 2005 Colorado. This is a no drill installation and all of the mounting hardware is included. Some items you may need to complete
  view full answer...


• Will This # E-3S Fit a 2002 Chevy Silverado 1500
  
• Part E-3S has an 8-3/4inch, center to center, span between mounting holes. Check your bumper to see if it has two holes that are 8-3/4 inches apart. If so, then this hitch will fit on your truck. These are universal fit items so they do not fit specific vehicles. You may also be interested in the following products: Hidden Hitch Trailer Hitch for the 2002 Pickup, Silverado, # 87186. Ball Mount Class III 3/4 inch Rise or 2 inch Drop - Extra-Extra Long, 6,000 lbs, part # 80232 Conv
  view full answer...


• Will Curt Bumper Hitch E-3S Fit a 2007 Dodge Ram 1500
  
• The Curt # E-3S bumper hitch is a universal application, so it does not have vehicle specific fits. This hitch would mount using four holes, two that would use 3/4 inch diameter bolts, and two that use 1/2 inch diameter bolts. You will need to measure to determine if the # E-3S hitch will work on your 2007 Dodge Ram 1500. The 3/4 inch holes are 8-3/4 inches apart, from center to center, and the 1/2 inch holes are 6-1/6 inches apart from center to center. These holes would need to be dril
  view full answer...


• Does the Curt 2 inch Bumper Hitch # E-3S work on a 1995 Silverado Short-bed 1500
  
• The Curt 2 inch Bumper Mounted Hitch, 5,000 lbs GTW, item # E-3S, will work for towing up to the 5,000 pound gross trailer weight rating and 500 pound tongue weight rating of the hitch or the capacity of your truck step bumper, whichever is lowest. You should check the capacities of your step bumper and the gross trailer weight and tongue weight of the trailer you will be pulling to be sure it is within the capacity of the hitch and bumper. I have provided installation instructions for you
  view full answer...


• What are the Dimensions of the Mounting Plate on Curt 2 Inch Bumper Trailer Hitch, # E-3S
  
• I went out to the warehouse and pulled a Curt 2 Inch Bumper Hitch, # E-3S, to take some measurements. The center to center distance between the two round holes is 6 inches. They measure 5-7/16 inches apart, inside edge to inside edge. They are 9/16 inches in diameter. The elongated holes are 7-5/16 inches apart, inside edge to inside edge. From the front of the elongated holes to the edge of the flat platform measures 5/8 inches. The elongated holes measure 1-1/4 inches by 13/16 inches. From
  view full answer...


• How To Determine Towing Capacity of an RV Bumper that is 4 Inch Square 1/8 inch Thick Steel
  
• The best way to determine what the towing capacity of the bumper on your RV would be to contact the manufacturer of your RV and ask what the bumper gross towing weight capacity is. I attached installation instructions for the Curt 2 inch Bumper Hitch # E-3S for you to check out also.
  view full answer...


• Fit of CURT 2 inch Bumper Hitch, # E-3S, on 1996 Chevy S-10
  
• The CURT 2 inch Bumper Hitch, # E-3S, will fit your 1996 Chevy S-10. To view the install instructions, click on the provided link.
  view full answer...


• Using Spacers to Install CURT Trailer Hitch # E-3S on a Step Bumper
  
• The CURT Step Bumper Trailer Hitch, # E-3S, comes with some square spacers, part 5 in the instructions linked for you, just in case the bumper does have that protrusion on the underside of the bumper. These spacers are 1/4 inches thick. If you are using these and still have 1/8 of a gap, a slightly thicker spacer can be used as long as you make sure to tighten the bolts as specified in the instructions.
  view full answer...


• Will CURT Bumper Trailer Hitch # E-3S Fit a 2005 Chevy Silverado with Southern Comfort Package
  
• From what I could find, the Southern Comfort package on a 2005 Chevy Silverado did not affect the bumper. What you can do to determine if the CURT Bumper Mount Trailer Hitch, # E-3S, will fit is to measure the area of the bumper where the hitch will install and compare that to the dimensions of the hitch. The top flat part of the hitch is 11 inches by 4 inches. The bolt holes closest to the receiver opening are 8-3/4 inches apart on center. The other set of bolt holes is 6 inches apart on ce
  view full answer...