Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
| 2.375 | 3.376 | 60-6 Wear Sleeve |
Tech Tip: 60-6 Wear Sleeve is no longer available. A 10-36 seal can be used as a replacement without a wear sleeve, if the original wear sleeve is damaged or missing.
Video of Trailer Hub Oil Seal, 3.376" OD, 2.375" ID
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Today were going to review part number 10-48. This is the Redline Trailer Hub Oil Seal. This oil seal is designed for the older style 8000-lb axles. It is designed to be used with a 60-6 wear sleeve. Basically the wear sleeve is a very thin metal sleeve that would fit over the spindle and would fit on the inside of the oil seal right here. That wear sleeve is no longer available so if you happen to have the wear sleeve on your spindle and you do want to replace the oil seal, you can use this one.
Now if you no longer have that wear sleeve or it is damaged then you can actually use a 10-36 oil seal as a replacement. Now a few measurements on this, the overall or outer diameter on this seal is 3.376. The inner diameter which is measured across here would be 2.375. Now if you go to the product page for this oil seal, youll see a chart and that chart will list the different manufacturers of oil seals and their part number which will coincide with this oil seal. That should do it for a review on part number 10-48..
Customers compare 10-48 to these similar products
Customers Who Purchased This Seals for Trailer Bearings Also Bought...
Ask the Experts about this Redline Seals for Trailer Bearings
Do you have a question about this Seals for Trailer Bearings?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
