Select Your Vehicle
view cartView Cart

Novelty > Vehicle Emblem > GMC > LED > Reese


GMC LED Lighted Vehicle Emblem

Reese Novelty

ratingratingratingratingrating (1 reviews)


Code:   86091

Retail:$49.99

Price:$34.95


Shipping Special

Shipping Weight: 1 pounds

Quantity: 






Reese Novelty - 86091

Add a distinctive, stylish touch to your GMC vehicle by replacing its current emblem with this light-up version. It prominently features the GMC insignia with red LEDs that shine when you activate your vehicle's tail lights or brakes.

Features:

  • Officially licensed GMC logo adds a stylish touch to your vehicle
    • Replaces standard OEM GMC emblem on rear of vehicle
  • Red LEDs light up to give your vehicle some flash and make it more visible, as well as to alert other drivers to slow down or stop when you do
    • Low illumination while you're using tail lights
    • High illumination when you brake or engage the hazard lights
    • Energy-efficient LEDs are long-lasting
  • Corrosion-resistant plastic construction with metallic coating that becomes transparent when lights are activated
  • Hardwires into vehicle's tail light assembly


Specs:

  • Application: GMC vehicles
  • 90-Day warranty


Note: For use on rear of vehicle only.


GMC Emblem Animation

Reese Towpower has created this General Motors Corporation emblem to look like an ordinary GMC logo in daytime, non-braking situations. When you turn on your vehicle's tail lights or activate the brakes, the emblem's unique metallic coating becomes transparent, and bright red LEDs shine through. The long-lasting LED cells have two intensity settings. The red lights use low illumination when your vehicle's tail lights are on and high illumination when you activate your brakes or hazard lights.



86091 LED Lighted Emblem for GMC Vehicles by Reese Towpower - GMC Logo





Video of GMC LED Lighted Vehicle Emblem


Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video install reese gmc emblem 2011 gmc acadia 86091
Reese GMC LED Lighted Vehicle Emblem Installation - 2011 GMC Acadia

Video Transcript for Reese GMC LED Lighted Vehicle Emblem Installation - 2011 GMC Acadia

Today on this 2011 GMC Acadia were going to install part number 86091 from Reese. Our first step to install this is go ahead and remove the original logo. Well go ahead and use a fishing line to separate the logo from the vehicle. With all adhesive removed from the vehicle, now Ill go ahead and mark for a hole we need to drill for our wire. We measure from the bottom of a new logo to where the wires are and then from the center, the M on the logo, over. Once we have our marks we can go ahead and drill out a 1/4-inch hole.

Now with a hole drilled out, well go inside the hatch and remove the interior paneling. To do this well need to remove the handle piece here as well as the two screws and three pushpin fasteners. Then well use a panel removal tool. Well next go to the license plate area, theres a grommet inside just behind this slide that leads up to the open area where our vehicle wires are. Well remove these two screws here to loosen up the light on the drivers side.

Well take our new logo and tape up the wires using electrical tape and then well take the wires of the new logo and feed them through the whole we drilled out in the light area and then push them through the grommet to the back of a hatch. Once the wires are through well cut the grommet and fit the wires in so we can go ahead and reinstall the grommet. Once the wires are inside well cut back the tape on the vehicle wires and begin testing for functions. Now I tested the wires and found out the light blue wire on the inside rang out from the third brake light we can use for our brake signal. And then the purple wire we tested going out to on the taillights on the hatch and the purple wire is going to be a running light circuit.

Well connect the red wire from the new logo to the blue wire using the provided quick connector and a brown wire will be connected to the purple wire. And our white wire will ran to a black wire which we know is ground. Now Ill go and test our logo to make sure it works fine before we attach it permanently. Well make sure that the surface is clean, well peel back the backing on adhesive, center it up and attach it to the vehicle. We can go ahead and reinstall the interior panel.

That then will finish it for our install of part number 86091 on our 2011 GMC Acadia.


Customers compare 86091 to these similar products












Customer Reviews

GMC LED Lighted Vehicle Emblem - 86091

Average Customer Rating:  ratingratingratingratingrating5.0 out of 5 stars   (1 Customer Reviews)




- 86091

ratingratingratingratingrating by: Rick Johnson01/14/2014

Is this review helpful?


Looks awasome and installed EZ. Than ks112765



Ask the Experts about this Reese Novelty
Expert Answers about GMC LED Lighted Vehicle Emblem - 86091                                             Do you have a question about this Novelty?



Info for this part was:


Test Fit:
Joe V

Video Edited:
Zack K

Expert Research:
Michael H

Expert Research:
Jameson C

Written by:
David L

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.





Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email



Only 4 Hours 9 Minutes Remaining

etrailer.com reviewsetrailer.com reviews

All images, layout and content copyright etrailer.com